Built in Wardrobe - how I made it
HTML-код
- Опубликовано: 2 окт 2024
- In this video I show how I made/ assembled built in wardrobe for corridor.
I started work in garage and started it with drawers - cut slots for bottoms and biscuits and started glue up. As I have only 2 long clamps and can glue only one drawer at time, I did other work, while glue was drying.
Then I processed with frame - measured and cut slots for biscuits, drilled holes for panel connection and drawer slides.
Final assembly at home was simple as biscuit slots were already cut. In non-visible places I connected panels on biscuits + screws, in visible places - on biscuits + glue.
****************************
Tablesaw: • DIY Table Saw - How to...
Biscuit jointer: bit.ly/2PmmTQE
Love your parakeet mimicking the drill noises in the background! ❤️🦜🦜🦜
You are super talented with the cards idea and the guide measure on your steel ruler. I love your tools and your methods. Great job😍
The cards method is older than you.
Kindly tell about the drill used .. link or model please.. i like your work
Where do you get your high gloss melamine boards and the gray ones from? I can't find it anywhere.
Can you give me the sizes and the chart?
Yes! This is where I was looking for, thanks!
What wood you used here?
may I know what is the material used?
melamine faced chipboard
It looks fine, but I im wondering if this join is strong enough , because where they meet the 2 sides of the wood the glue don't stick to the melamine.
You can get melamine glue.
Почему ДСП, а не мебельные щиты?
В этом случае были нужны простые серые шкафы - не было смысла делать из мебельных считов.
Excellent job!
Good, good and good.
Complimenti, bello e funzionale.Interessante il "sistema biscotti". Cosa sono qugli"aggeggi" che hai avvitato sotto ogni componente,e dove li hai prei (mi metti il link? Grazie
What do you mean by "Cosa sono qugli"aggeggi" che hai avvitato sotto ogni componente"? Was not able to translate it correctly. If it is about drawer runners - I used these: www.hafele.co.uk/en/product/concealed-drawer-runners-full-extension-load-capacity-30-kg-haefele/00000040000399b100020023/
Great work !
The idea is ok
But very cheap material
And poor make
I good carpenter NEVER USES NAILS OR SCREWS ONLY FOR THE HARDWARE
WHEN YOU SEE A CARPENTER USING NAILS OR SCREW
GET OUT THE WAY IMMEDIATELY
Отличная работа! Мои поздравления!