Sir it's been 3 years I'm watching your videos now in 2022 and still your videos are helpful for many students and your videos for helping my semester preparation alot u made engineering drawing so easy to understand thanks alot sir 😇🙌🙌
Hello Sir I'm Akhil From Chirala.... Nenu meee videos chusaanu... Naaku drawing assalu emi raadhi nenu passavuthaano ledo anukunnannu but RUclips loooo check chesthay Meee videos Clarity gaaa ardhamavuthunnaaii...... Sooo 5 days looooo meee videos chusi exam raasaanu, I got 33 marks in that Exam.....! I'm Elated to pass that exam... 3 years nunchi raassthunnaa kaani avvalaa... Naaku saraina guidance ledu alaaa raayalooo....... I'm a final year student Now I completed my Engineering course......! Thanks for For that Videos Sir Thank You.....! Eeee vishyam personal gaaa call cheysi chebudaam anukunnaaa...! But meeeru lift cheyyaalaaa....! Sooo I thought you must be busy....! Anyway Thank You Sir For that videos Keep doing.....! 👍👍👍
Sir plzz projections of planes and solids videos cheyara Me teaching method chala super ga undi sir which helped me to complete eg assignment easily Tq sir🤗🤗
Sir u r osm , I'm really happy by u r teaching and way u explained. I will now subscribe u r Chanel u will get great success in future I wish u all the best keep updating more problems
The front view of a line AB is 50mm long and it makes an angle of 35 with xy. The point A lies 10mm above the HP and 25mm behind the VP. The difference between the distance of A and B from the VP is 25mm.The line AB is in second quadrant. Draw the projections of the line; determine its true length and inclinations with the HP and the VP? plzz provide the ans in a rough manner plz help me
Hello sir i became a fan to u ❤ sir, really if I pass eg it's all because of u . SIR line inclined to both the planes lo N. D. BHATT book lo exercise 10(b ) problems chaala tough unay sir konchem avi cheppandi sir plz
Sir pls post this below answer..a line pq ,90mm long is in hp.p and makes an angle of 30degrees with vp. Its end point p is 25mm infront of the vp ,draw its projections...thank you
The projections of the ends of a line AB are 5cm apart.The end A is 2cm above the H.P and 3cm infront of v.p The end B is 1cm below Hp and 4cm behind the vo Determine the true length and traces of AB and it's inclination with the two planes
Sir e sum simple gaa vasii chappara, plz Draw the projections of a line AB, 90 mm long, its mid-point M being 50 mm above the H.P. and 40 mm in front of the V.P. The end A is 20 mm above the H.P. and 10 mm in front of the V.P. Show the traces and the inclinations of the line with the H.P. and the V.P.
A line AB, 90 mm long, is inclined at 30° to the HP and 45° to the VP. Its end A is 12 mm above the HP and 20 mm in front of the VP. Draw the projections of line AB.
Hello, sir Could you help me about this problem The line AB is 80mm.The end A is 20mm above H.P and 35mm infront of V.P. Another end B is 20mm above H.P and 40mm infront of VP. Then the line is hanging on midpoint. Draw the projector.
Sir I've written my exam , but for 1 question I forgot to mention the question number and I didn't write all dimensions in mm , if Iam counting Iam getting around pass mark if I leave the question I didn't put number, is there any chance they would consider it sir? Please reply sir , Iam really tensed
@@Subhodaya sir it would be really helpful if you reply sir, I am stupid for not mentioning the question number that I ve written the correct answer for
@@shyamala2987 Don't worry just forget about it and hope for the best. 99% they will consider even if you not mention the question. Now leave it and relax
Your explanation is good. But the approach of achieving solution is not right. You forgot that the least count of Plain scale is 1mm. Therefore, We cannot mark 0.5mm using it.
![Megan Thee Stallion - Roc Steady (feat. Flo Milli) [Official Video]](http://i.ytimg.com/vi/HozPPyqW0dY/mqdefault.jpg)
Sir it's been 3 years I'm watching your videos now in 2022 and still your videos are helpful for many students and your videos for helping my semester preparation alot u made engineering drawing so easy to understand thanks alot sir 😇🙌🙌
#2024 watching
Sir your presentation is excellent and also you passionated teacher, tq for uploading those videos
And also upload projection of planes & solids....
Hello Sir I'm Akhil From Chirala....
Nenu meee videos chusaanu...
Naaku drawing assalu emi raadhi nenu passavuthaano ledo anukunnannu but RUclips loooo check chesthay Meee videos Clarity gaaa ardhamavuthunnaaii......
Sooo 5 days looooo meee videos chusi exam raasaanu, I got 33 marks in that Exam.....!
I'm Elated to pass that exam...
3 years nunchi raassthunnaa kaani avvalaa...
Naaku saraina guidance ledu alaaa raayalooo.......
I'm a final year student Now I completed my Engineering course......!
Thanks for For that Videos Sir
Thank You.....!
Eeee vishyam personal gaaa call cheysi chebudaam anukunnaaa...!
But meeeru lift cheyyaalaaa....!
Sooo I thought you must be busy....!
Anyway Thank You Sir For that videos
Keep doing.....! 👍👍👍
Awesome explanation of mid point problem....don't know Telugu but understood due to the way u explained
U got a subscriber
ilanti problems solve cheyyadaaniki chaala kasta padda but ippudu easy ayyindhi sir tq so much
Tq tq tq so so much sir just because of you have cleared my ED exam held on dec 2021 Thank you once again sir❤️
sir,last question ayithe super sir..very logical ones..
Sir plzz projections of planes and solids videos cheyara
Me teaching method chala super ga undi sir which helped me to complete eg assignment easily
Tq sir🤗🤗
Excellent sir. Explain baga chestaru.
Thanks for ur easy explanation sir🤗🤗🤗🤗
sir meeru thopu chepthullu masthu ardamaythundhi
We loved your teaching..
Sir u r osm , I'm really happy by u r teaching and way u explained. I will now subscribe u r Chanel u will get great success in future I wish u all the best keep updating more problems
Your vedio are very understanding please keep doing sir
We need planes and solids also plzz that we can understand easily
nice explaination sir
Super sir ,I have been completed my graphics exam sem 1,i wrote very well
Thank u sir me e videos vala drawing subject pass iayanu 🙏
Sir meru cheppinavi Baga follow avthunna I want circle,hexa,Pentagon projections video kavali sir plz upload
Sir I want u to upload projection of solids videos u r teaching method is very nice
Konchem difficult sums and difficult topics cheppandi sir please alane projection of planes cheppandi sir
Super explanitaion sir alage orthographic projection topic meedha cheyandi sirr plz sirr
The front view of a line AB is 50mm long and it makes an angle of 35
with xy. The
point A lies 10mm above the HP and 25mm behind the VP. The difference between the
distance of A and B from the VP is 25mm.The line AB is in second quadrant. Draw the
projections of the line; determine its true length and inclinations with the HP and the VP? plzz provide the ans in a rough manner plz help me
Superrr sir please do projection of planes and solids sir please sir
thanks a lot Anna nenuu pass because of you
sir please make videos on planes and solids within one week
Solids gurinchi videos cheyandi sir please
Hello sir i became a fan to u ❤ sir, really if I pass eg it's all because of u . SIR line inclined to both the planes lo N. D. BHATT book lo exercise 10(b ) problems chaala tough unay sir konchem avi cheppandi sir plz
Thank you sir
Your explanation is so good sir,could you please tell us the isometric views,so make videos as early as possible sir
Sir please do projection of solids and projection of planes videos
Sir TQ so...... much👌👌👌👌👌
sir upload vedios about proj. of straight lines in 2nd and 4th quadrant. and how to find their traces
Sir.... please upload videos on planes and solids.I am eagerly waiting for your uploads
We want projection of solids , orthographic, and more in ED SUBJECT
Sir traces midha Oka video cheyyandi sirr
Sir projection of planes and solid video s kuda cheyandi
Sir pls post this below answer..a line pq ,90mm long is in hp.p and makes an angle of 30degrees with vp. Its end point p is 25mm infront of the vp ,draw its projections...thank you
And orthographic projection mida kuda video pettandi sir
Sir also please upload an projection of solids
Sir I request you to upload projection of planes and solids videos
Superr sir
Super sir
Quadrants iste ela cheyalo ardm katle SIR line inclines to both the planes lo..plz andulo okati aina pettandi sir 🙏🙏🙏🙏🙏
Anna isometric orthographic topic gurinchi pettu Anna please
Super explanation
Sir Thank you soo much sir
Sir ,pls upload projection of solid and auxilary views videos
Sir we need projection of planes solids please sir
Sir please give lecture for projection of planes and solids
Sir can you make videos on engineering drawing as per syllabus of ies
The projections of the ends of a line AB are 5cm apart.The end A is 2cm above the H.P and 3cm infront of v.p The end B is 1cm below Hp and 4cm behind the vo Determine the true length and traces of AB and it's inclination with the two planes
Sir please do videos on projection of planes and solids....plsss sir
"Line Inclined to Both The planes " Topic lo P is in Q2 and Q is in Q4 ani unnay ga avi chepara sir plz 🙏plzz ❤
Sir upload projection of solids and auxiliary views
Planes and solids meeda kuda vedios cheyandi sir
Sir if qs is with angles,is the procedure of midpoint to be followed
Sir machine drawing videos cheyandi sir plzzzzz
Sir e sum simple gaa vasii chappara, plz
Draw the projections of a line AB, 90 mm long, its mid-point M being 50 mm above the H.P. and 40 mm in front of the V.P. The end A is 20 mm above the H.P. and 10 mm in front of the V.P. Show the traces and the inclinations
of the line with the H.P. and the V.P.
Sir please do the videos on solids
Excellent teaching!!
Ahh Arun kummestunav ga nuvve topper vi😎🤘✊ drawing lo....
@@vuyyurirajkumar902😂😂
Sir make videos for planes and solids ..exms are coming soon..pls plss.sir....pls doo sir 😢
Sir projection of solids videos pettandi sir...plzzz
Sir please tell me about what is horizontal trace(HT)
A line AB, 90 mm long, is inclined at 30° to the HP and 45° to the
VP. Its end A is 12 mm above the HP and 20 mm in front of the VP.
Draw the projections of line AB.
ruclips.net/video/zny_ajn8pyU/видео.html
Super bro
But the video is too lengthy
Pls make videos on planes and solids
Superb explanation sir
help me in planes too
oblique projections kuda cheppandi sir
Super
Bro in last qn what's use of true length then..?
Plans and solid upload chaindi Sir
Tq Soo much sir....
Hii sir I'm Srinivas, I want,how to find the traces in projection of lines please tell me
Hello, sir
Could you help me about this problem
The line AB is 80mm.The end A is 20mm above H.P and 35mm infront of V.P. Another end B is 20mm above H.P and 40mm infront of VP. Then the line is hanging on midpoint. Draw the projector.
Sir ellipse sum kuda chappandi sir...
Sir both views i.e topview and front view reduced length nunchi Arc kodathuntey locus line ki inclined avvadamledhu sir .....plz explain
Straight vachina no problem
Projection of planes kuda chappandi sir
Sir projections of planes medha video cheyandi
Already chesesanu. Please go through my channel or description lo link untadhi chudu
Sir please tell about the horizontal trace af vertical trace conceptsin lines
Sir okavella angles isthey half cheyyalemu kada appudu ela cheyyali??
Sri projection of planes also explain sir plzzz
Please make vedio on solids sir
Come to my college sir......!!!!
Sir Monday 21 -5-17 drawing exam sir please upload videos on projection of planes ,solids please please please sir
phaneendra dondapati jntuk ah
Sir line ni extend chesaka end point s oke line mida undala
Sir pls upload projection of planes and solidss pls sirrr
Neat explanation sir alage scales gurinchi kuda videos cheyyandi sir
Sir mq1 kanna mq2 chinnadhi aithe q formation ela jarigindi sir
True dimensions tho draw chesthey you will get a straight line
Sir front view reduced length 37.5 nunchi Arc locus line ki kavadamled sir
Sir I've written my exam , but for 1 question I forgot to mention the question number and I didn't write all dimensions in mm , if Iam counting Iam getting around pass mark if I leave the question I didn't put number, is there any chance they would consider it sir? Please reply sir , Iam really tensed
99% no problem
@@Subhodaya So will they consider it and put at least 1 or 2 marks sir😭 for the question that I didn't mentioned the number
@@Subhodaya sir it would be really helpful if you reply sir, I am stupid for not mentioning the question number that I ve written the correct answer for
@@shyamala2987 Don't worry just forget about it and hope for the best. 99% they will consider even if you not mention the question.
Now leave it and relax
@@Subhodaya Sir if it really happens so then I would really be happy, I trust you sir
Sir what is HT and VT
Tq sir
Your explanation is good. But the approach of achieving solution is not right. You forgot that the least count of Plain scale is 1mm. Therefore, We cannot mark 0.5mm using it.
Look here ani 99times cheppadu
sir doind vedios on planes
62.5 and 37.5 yela pettali sir measurements
62 and 63 ki madhyalo pettandi
@@Subhodaya okk sir tq
We have no time plzz do it fast
Sir you explain it very Good , but you should speak in Hindi so that other can also get benefits of your Video.
Projection of planes medha vedioe chetandhi sir
Sir please upload next video sirr ...... please
🙏🙏🙏