Stainless Steel Fridge Dent Repair Tutorial

This video demonstrates step by step guide to DYI for dent repair on stainless steel appliance Refrigerator, the same concept also applies to other kitchen appliances such as dishwashers, dryers, ovens, etc... It will also work for automotive cars, trucks, motorcycles, motor vehicles.
Save money DYI from professional body repairs. Watch the video to the end to see the final result.
ManufactureL Gliston
Amazon product: GLISTON Paintless Dent Puller - Golden Dent Puller Kit, 35pcs Dent Remover Tools with Adjustable Width Dent Repair Tools for Car, DIY Auto Body Dent Repair www.amazon.com...
Price: $51.99
Size: Large Kit
Widely Used: Paintless Dent Puller Kit can be used for the car dent and any other metal surface like refrigerator, washing machine, etc.(Tip: Not suitable for creases or corners dent).
Professional Dent Repair Kit: The Golden dent lifter specifically designed can adjust more 1 cm height and more 3.8cm width both for small dent and big dent , 21pcs different shape and size pulling tabs which are made by PA materials supplied for fixing various shapes of dents.
Easy to use: Dent Removal Kit lets you repair the dents anywhere anytime by your self,since the accessories of Paintless Dent Repair are not complicated at all.Only three steps then you can repair a dent. Step 1: Place the tab which full with glue in the dent. Step 2: Use the dent lifter to pull the dent out. Step 3: Remove glue by alcohol and plastic shovel. Support one-handed operation, suitable for repairing small dents.
Paint Friendly: All materials of our dent remover without chemicals or other bad material. Soft rubber in dent lifter’s holder bottom can prevent car paint being scratched. Glue can be removed easily and won’t hurt the original paint.
High Quality: These dent puller kit made from high quality metal and plastic that is durable enough to last you several years. All products passed strict quality control before shipping out, We are professional manufacturer and honest sellers, and we protect the right of the customers. We also accept return if you are not satisfied with your purchase, which seldom happens.

[@kpo3704]

I suggest you go watch the really well done paintless auto dent repair videos. They use all the tools and give instruction and get all the dents and high spots tapped down as well. And, they use alcohol and not a scrubber pad which can scratch to get the hot glue off. I think if you do your job will be more satisfactory.

[@Chanmantroop10]

Bro. The alcohol will remove the glue. Also hair dryer will soften the glue. U just added a tonne of scratched scraping the glue off dry like that

[@KevinSmith-gw4bj]

You actually did it right and did not make it worse. The next steps would be to repeat until you have the other indents pulled then begin to tap down and smooth out. This is not a fail and you are on your way!

[@KentDiego]

Good info Kurt

[@rickl6697]

A bump up is not bad. You then use a knock down tool to tap it back down.Spray alcohol on the glue before you scrape it off. Part of the problem is the metal was stretched. Use a heat gun(not hair dryer), in an inconspicuous place first(use low setting first). Heat it up and let it cool off on it's on. Repeat several times. This will shrink the metal. You can also try a rapid cooling if gradual doesn't work by applying a wet cloth or spraying a air duster upside down which is very cold. I've seen people pop dents out of cars using air duster upside down after heating it with a heat gun. Watch some videos on RUclips on fixing hail damaged cars. Be careful, good luck.

[@Blingem14]

You don’t need to pull each dent until the glue pops off. You only want to get it pulled out then remove the tool and use rubbing alcohol to get to glue to let go and start to pound down the bumps. You’re not using the kit properly.

[@BlvdTelevision]

Was I the only one that had their heart racing watching him scrape off the hot glue? Guess he forgot to use the alcohol smh

[@philiprea8340]

OMG yes read the directions dude, looks great.

[@KimoKimochii]

he scratched tf out of the fridge

[@patmanley8634]

Tutorial on what not to do.😂

[@DanBlackRacing]

Your dent puller is only STEP of TWO STEPS.
Step 1
Use the dent puller you used.
Step 2
Flatten the dips and bumps slowly with a Stainless steel dent removal hammer.

[@chrisanderson_tx]

Bulging Swelling Bump 😂

[@gordonturner8544]

OMG You made it worse! Did you even look at Utube PDR guidance before opening box?? ( rhetorical question: answer NO) Gentle approach with knockdown would have made the dents go away. Instead you attacked the fridge!

[@BlvdTelevision]

Some people should be be handed a dent repair kit lmao

[@grampy97]

bud, u needed to pull it enough to pop the dent. U clearly over did it man.

[@tomiprimera7069]

Probably less damage if you remove the glue with a chain saw buddy..

[@johnkim1656]

You pulled too hard lol

[@sockmonkey22]

I did it gently and the plastic peg pops off.

[@DanBlackRacing]

wait longer for the bonding. Also make sure you alcohol the surface (and let it dry) before binding.

[@jasonj4326]

uhh... time to call a professional

[@Guzman_j]

Sorry I can’t with last 20 seconds of the video

[@holyarmageddon19]

😂😂😂😂 50%

[@nabeelalam7801]

🤪

[@BennyBoyW]

Not so good

[@shahed85boss]

Painful

[@chekreynaldo5343]

WTF hahaha! 😂

[@Wave8Form]

You are way to aggressive man........

[@KRUSTYG95]

10000000 X worse