I have the same gun but mine doesn't hold the barrel pin holder in place so everytime I shoot the barrel doesn't rotate all the way to the next bullet hole it only rotates halfway and I have to rotate it manually it seems like there is a spring that holds the pin holder in place that it might be broken . Any ideas thanks in advance
There is a spring between the tension pin and the trigger housing. What moves the cylinder is the rachet at the back of the cylinder that is moved by the trigger linkage. What was happening with this gun was the cylinder would rotate backwards after trigger was released because the tension pin was frozen.
New Link ruclips.net/video/l_NdTMju6Dk/видео.html This was my old camera, and something went wrong with the mic. I'm more familiar with the editing software so I changed some settings. I just don't know how to remove all the static from the bad mic. I'm uploading a revised video. let’s see how this works out. unfortunately, once you perform the task it's over can't undo and reshoot. Let me know in the comments if you can hear it. If you can I will reupload the other 2 parts.
Good day, A customer brought in an identical H&R to yours. It too does not return the trigger. Upon inspection, there was no trigger spring. So, after searching high and low for a replacement and finding nothing, I am needing to produce the same trigger return spring that you made. But without the old spring.... well, pretty sure you understand. Would it be possible to get the dimensions from you? I understand I will have to adjust those dims to this particular revolver, but I suspect they will be relatively close. Your help would be MUCH appreciated.
Push the cylinder guide rod release located at front of trigger housing, pull guide rod forward and cylinder will come out. Clean gun as you would any other gun.
I think your revolver is a Model 1905 or a Model 05. Same gun just different names. This revolver was discontinued in 1940.
Thanks for the video.
Jeff
YOUNG AMERICAN MODEL OF 1905
Hello teacher, I am Iranian. Hello dear teacher, I am Iranian. I would like you to accept me as your student ❤❤❤
I need help. Hammer spring. I’m trying to install a new one.
The gun is much earlier than 1965.
Bonjour on peut tirer avec de la poudre vive avec ?
I have the same gun but mine doesn't hold the barrel pin holder in place so everytime I shoot the barrel doesn't rotate all the way to the next bullet hole it only rotates halfway and I have to rotate it manually it seems like there is a spring that holds the pin holder in place that it might be broken . Any ideas thanks in advance
There is a spring between the tension pin and the trigger housing. What moves the cylinder is the rachet at the back of the cylinder that is moved by the trigger linkage. What was happening with this gun was the cylinder would rotate backwards after trigger was released because the tension pin was frozen.
New Link ruclips.net/video/l_NdTMju6Dk/видео.html
This was my old camera, and something went wrong with the mic. I'm more familiar with the editing software so I changed some settings. I just don't know how to remove all the static from the bad mic. I'm uploading a revised video. let’s see how this works out. unfortunately, once you perform the task it's over can't undo and reshoot. Let me know in the comments if you can hear it. If you can I will reupload the other 2 parts.
Dont bang on those grip covers there probably bakelite
how to remove trigger and fireing mehanizam
Good day, A customer brought in an identical H&R to yours. It too does not return the trigger. Upon inspection, there was no trigger spring. So, after searching high and low for a replacement and finding nothing, I am needing to produce the same trigger return spring that you made. But without the old spring.... well, pretty sure you understand. Would it be possible to get the dimensions from you? I understand I will have to adjust those dims to this particular revolver, but I suspect they will be relatively close. Your help would be MUCH appreciated.
I sold that gun last year. But I have the broken spring. I will make a drawing of it
Email to send print?
I put it on your Facebook page.
@@burnthillmachine Fella, I can't thank you enough.
How do you break the gun down for cleaning never owned one and very confused
Push the cylinder guide rod release located at front of trigger housing, pull guide rod forward and cylinder will come out. Clean gun as you would any other gun.
That gun is over a hundred years old
1901