Solved the problem, thanks so much. Extra info: I had already tried to update the driver automatically, which changed the error message shown on device manager to "PL2303HXA phased out since 2012 contact supplier" I had to manually uninstall this, then follow the instructions in the video and voila! Weather station working again.
Worked Sept 9th 2020! I had the "PL2303HXA phased out since 2012. Please contact your supplier driver." message, I installed the driver provided in the link, on Device Manager right-clicked on the device, "Update driver", "Browse my computer", "Choose among a lists ..." and selected the oldest one. It worked perfectly.
Thank you. Helped me on Windows 10 64bit. However, I had to uncheck "only compatible devices" and then I selected the good driver from the installed drivers list.
Hello, I have a device and i have RS232 comunication port, i set up to comunication from my laptop to this device, i use PLL2303 module tu convert from USB to RS232, but in a mistake moment, i revers two comunication line, TX of device to TX of PL2303 module and RX of device to RX of PL2303 module (two power line still accurate position). This can distroy port of my device of PL2303?
I have a Win 10 Pro (latest build - 1903), and the only driver that works for me is version 3.2.0.0, the old Windows 7 version. All the later drivers don't work. You can easily find 3.2.0.0 online.
Can you help me please? I’m having trouble connecting to the vehicle. I think I’ve installed all the drivers needed but I’m not seeing “prolific USB-to-serial comm” I only see “ch340 (com3)” what am I missing here?
You are welcome. I am glad it did. The best thank you for me is to not skipping the ads and Subscribe 🔔 to my channel, like 👍 the video and do not skip the ads.. It is greatly appreciated. 🔔 😊. I will reply to all Subscriber's 🔔 questions. So make sure to Subscribe.😊 .
Hi RoboJax. I did as instructed but I am still getting an error. I was using the driver v1.4.0 on my old computer before upgrading to a new computer with windows 10. After plugging in the cable for my plotter it automatically updated to 3.8.25.0. I did as you instructed and after doing everything as instructed it says "windows encountered a problem installing the drivers for your device" "Windows found drives for you device but encountered an error while attempting to install them" "This device cannot start. (Code 10). It also tells me "If you know the manufacturer of your device, you can visit their website and check the support section for drivers." If you have any ideas, I would appreciate it.
Also, In the Device Status section after the install it says "This device cannot start. (Code 10)" "{Not Enough Quota} Not enough virtual memory or paging file quota is available to complete the specified operations"
I am sorry. Windows Update some times make changes to things which are out of control. if this works for you, then avoid updating. I am not sure about other solution.
You are welcome. I can't believe how this has been useful to people. I had the issue, resolved by searching pages and videos and made a video and not it helps people.
you are welcome. The best thank you for me is to not skipping ads and Subscribing 🔔 to my channel, and liking 👍 the video. It is greatly appreciated. 🔔 😊. I will reply to all Subscriber's 🔔 questions. So make sure to Subscribe.😊 .
ciao autista Sto riscontrando problemi nell'installare il setup Sto facendo lo stesso errore nella schermata blu quando riavvio del PC il sistema sta iniziando a riavvolgere il sistema windovs 10 64 bit
In my windows 10 laptop, the connector is showing as "other device" not under "ports" like it was showing in the video. Why is my device unable to identify the cable as "serial adaptor" and rather identifying it as an external usb device?
First, can't you continue from that point even it shows as "other device"? I am not sure why you see it that way but perhaps you have got different deice.
I have a Baofeng T1 radio, factory reset. my problem is the reset and the display shows me 19 666.666 I do it with the up and down arrow and it does not show me more than the frequency 19. I am doing wrong or what happened inside the software I do not actually see set com3. and in the program (P) section followed by Read data From InterPhone (R), only one frequency comes out and nothing is seen anymore I want the 16 frequencies to be seen. I already installed firware on my computer, and updated flash. what will be
Thank you so much! I have a very old Haicom GPS receiver and couldn't find any driver that would work. Your solution did and now the GPS data is ticking in! Can I host your file an solution as a mirror (backup)? I will of course give you all credit and link to your website.
Sir, past days I unfortunately uninstalled the device usb prolific from device manager. Now, when I connect the device to usb port it doesn't appear on device manager anymore, so I can´t neither update the device because device prolific appears no more on device mngt. What should I do?
I have no idea why it doesn't work with your USB. Either your chip is different or something else like other software is changing the settings. Try it on another computer.
@@robojax thanks Sir atleast you have responded, no one here reply to people's concern, thanks a lot, and the issue is solved again i saw another video that uses a driver from 2007 now its working perfectly, now i m hoping the issue don't come back
Hello, interesting. You would have to find out the drivers for the device in BOTH working and AND non-working condition . so when when you fix it, on device manage click on the the device and follow this snag.gy/JY4qsV.jpg and write down the files (4 or 5 or more files) and then restart your computer and when it when you got the NON-working condition, again check the files and see what is the difference and which files are responsible for non-working condition and remove them. Try this. If you are unable to delete files, search RUclips on how to delete files
I spent hours trying to solve this problem, then I found your video.Worked first time.I wish I'd seen your video sooner.Thanks very much.
you are welcome. I am glad to hear that.
Solved the problem, thanks so much. Extra info: I had already tried to update the driver automatically, which changed the error message shown on device manager to "PL2303HXA phased out since 2012 contact supplier" I had to manually uninstall this, then follow the instructions in the video and voila! Weather station working again.
You are welcome. Thank you for sharing the experience tip.
Thanks, I tried about 26 different versions of the PL2303 Driver for my device. You saved my life!
You are welcome. Pleased to hear that.
You are the best dude !!!... i download drivers to 2016, 2018, 2019 and nothing, but this PL2303 of 2009 works so good ! ... Thanks !
You are welcome. I am glad it solved the issue.
Thank you so much. It worked flawlessly! I was going crazy over this! :D
You are welcome. Good to hear that.
thank you! This worked for me. it was the fact that i had to select the older 2009 drivers.
You are welcome.
Lifesaver !!! Big shout out to Robojax !!! thank you so much for this !!!
I am glad it helped.
Thank you! Worked like a champ!
you are welcome.
Thanks!!!! Looked all day for driver that works on those non Prolific clones Thanks again
You are welcome.
thanks a lot I was looking for solution for 6 months!!! god bless you:))))
You are most welcome. god bless you too.
Same for me...thanks so much!!! What a relief! I did not want to throw away my Uno clone!
you are welcome.
THANK YOU !!! you saved my ELM 327 obd2 diagnostics from trash...
You are welcome. Thank you for sharing your experience.
Even in 2020 it still works. Thanks!!
you are welcome.
Worked Sept 9th 2020!
I had the "PL2303HXA phased out since 2012. Please contact your supplier driver." message, I installed the driver provided in the link, on Device Manager right-clicked on the device, "Update driver", "Browse my computer", "Choose among a lists ..." and selected the oldest one. It worked perfectly.
Thank you for sharing your experience.
Thank you so much I was having Trouble with the Adapter and now it works like a charm.
you are welcome. i am glad you found it useful.
thanks man ! it worked for me after a reboot ( a cheap elm 327)
No problem 👍
Thanks for the driver! It has worked at the first attempt :)
You're welcome!
Fantastic! Your instructions were the only ones that seem to work. Thanks!
You are welcome.
Thank you!! This resolved the exact issue that you showed. Wow. Thanks a million!
You are welcome. Good to hear that.
Thank you.
Helped me on Windows 10 64bit.
However, I had to uncheck "only compatible devices" and then I selected the good driver from the installed drivers list.
You are welcome. In some computers you needed to do it differently. I am glad you were able to fix it.
Thank you! This problem has plagued me for awhile now. Officially solved Jan 3rd 2020 !
You are welcome. Good to hear that.
I found your video really helpful and it worked.. Thank you so much.. I was wondering around the internet .. Love you bro
You are welcome. I am glad you found it useful. Ahmad from Canada.
Congratulations! This resolved this issue just perfectly, Thanks alot
You are welcome. Good to hear that.
Man, thank you so much for this video! Problem solved just following these steps.
You are welcome. Good to hear that.
Thank you driver worked for me, video explained everything perfectly!
You're welcome!
Thanks man, it totally worked! You're a life-saver
you are welcome.
thanks mate. worked for me window 10 64bit for cable for programing amatuer radio equipment.
You are welcome.
Worked for me on windows 10 thanks. I was confused why the newer version 2017 driver would not work compared to the old 2002 one
You are welcome. Until the manufacturer offer new driver, this solution will work.
I love u bro......tqs it helped me a lot in the last moment .....may ur videoes keep coming tqs again
❤️ U too. good to hear it helped you.
absolutely fine working solution boss..............
Thank you very much for sharing, have been looking for this for a long time. thumbs up
You are welcome.
Man, you just saved my job. Thanks :')
I am glad I did. You are welcome.
Thank you so much for providing your videos to help with your products. Keep it up!
You are welcome. Thanks
It works perfectly well. Thanks buddy, you're amazing!!
you are welcome.
Thank you so much ! Been looking for a solution for this for a long time. Great job !!
You're welcome!
thank you for posting this quick helpful tutorial
You're welcome!
Thanks mate, worked on Windows 10 1803 as you described!
You are welcome.
EXCELENTE!!! Funcionó perfectamente, sigan los pasos tal cual el video. Tengo un Windows 10 PRO, ver. 1803, compilación 17134-885. MUCHAS GRACIAS!!!
De nada. Bueno oír eso. Ahmad de Canadá.
Excellent! Worked perfectly even though I had my doubts! Thanks so much!
You are welcome. Good to hear that.
Very Thank You Man.!... You resolved My Problems ;)
You are welcome. good to hear that.
Thank you so much. You are the best of the RUclips.
You are welcome.
Brilliant,. solved all the problems I had encountered
Good to hear that. Please subscribe It is greatly appreciated. 🔔 😊
Works great on Win 10 64bit. Thanks a lot!
You are welcome.
Hello, I have a device and i have RS232 comunication port, i set up to comunication from my laptop to this device, i use PLL2303 module tu convert from USB to RS232, but in a mistake moment, i revers two comunication line, TX of device to TX of PL2303 module and RX of device to RX of PL2303 module (two power line still accurate position). This can distroy port of my device of PL2303?
it worked, love u man, NO HOMO!
Good to hear that. Thanks.
Thank you very much indeed, the best driver ever.👏👏👏👏👏👏👏👏
You are welcome. Salam
I have a Win 10 Pro (latest build - 1903), and the only driver that works for me is version 3.2.0.0, the old Windows 7 version. All the later drivers don't work. You can easily find 3.2.0.0 online.
THANK YOU for this!!!
You are welcome.
Similar issue resolved the same way. Thks, man! :)
You're welcome!
PL-2303HXA work very fine on windows10, thanks alot bro
You are welcome.
Can you help me please? I’m having trouble connecting to the vehicle. I think I’ve installed all the drivers needed but I’m not seeing “prolific USB-to-serial comm” I only see “ch340 (com3)” what am I missing here?
if it is CH340, then it would be the easiest. Try the download link in this page: robojax.com/products.php?pid=133
Super the trick, I finally put my adapter on Win10.
Thank you
You are welcome.
Thank you , it worked for me :) i really appreciate
you work bro
You are welcome.
Thanks a ton man! Really helpful :-)
you are welcome.
Thank you, your video help me to solved my problem. You are great man!
You are welcome. I am glad it did. The best thank you for me is to not skipping the ads and Subscribe 🔔 to my channel, like 👍 the video and do not skip the ads.. It is greatly appreciated. 🔔 😊.
I will reply to all Subscriber's 🔔 questions. So make sure to Subscribe.😊 .
@@robojax already done)
Indeed, a valuable solution, thanks.
Excellent! Thank you very much for solution!
Thank you very much, worked perfectly for me on windows10. Really helpful.
You are welcome. Pleased hearing that.
The link doesn't work, I have also checked Robojax "download" link. Nothing there! :( :( :(
Just read the comments. It has worked for 1000s of people.
Usb to serial controller driver for arm64 on Windows 11 pro on Macbook M3 can't find it anywhere. Help? I'm using a VMware fusion virtual machine
Hey thanks, I have been wrestling with this install for too long
You are welcome.
Wonderful!! it works! thanks for the info!!!
ole tuh cohones peluos robojáh!
You're welcome!
Hi RoboJax. I did as instructed but I am still getting an error. I was using the driver v1.4.0 on my old computer before upgrading to a new computer with windows 10. After plugging in the cable for my plotter it automatically updated to 3.8.25.0. I did as you instructed and after doing everything as instructed it says "windows encountered a problem installing the drivers for your device" "Windows found drives for you device but encountered an error while attempting to install them" "This device cannot start. (Code 10). It also tells me "If you know the manufacturer of your device, you can visit their website and check the support section for drivers." If you have any ideas, I would appreciate it.
Also, In the Device Status section after the install it says "This device cannot start. (Code 10)" "{Not Enough Quota} Not enough virtual memory or paging file quota is available to complete the specified operations"
I am sorry. Windows Update some times make changes to things which are out of control. if this works for you, then avoid updating. I am not sure about other solution.
Absolute legend! Thanks a million!!
You are welcome. I can't believe how this has been useful to people. I had the issue, resolved by searching pages and videos and made a video and not it helps people.
Congratulations, it worked perfectly, thank you very much.
You are very welcome.
Thank you! worked like a charm
You're welcome!
wow, you deserver salute, this solve properly. Thank you very much
You are very welcome. I am please that it resolve the issue for you.
Worked for me in Windows10 x64
Thank you...
You are welcome.
Thanks man! It worked perfectly!
You're welcome!
Thank you so much. Worked perfectly :)
you are welcome. The best thank you for me is to not skipping ads and Subscribing 🔔 to my channel, and liking 👍 the video. It is greatly appreciated. 🔔 😊.
I will reply to all Subscriber's 🔔 questions. So make sure to Subscribe.😊 .
Great Tip!!! Solved my problem (Win10 64 PRO)
Good to hear that. Thanks.
Thank you very much, helped me a lot, it works!
You are welcome.
ciao autista Sto riscontrando problemi nell'installare il setup Sto facendo lo stesso errore nella schermata blu quando riavvio del PC il sistema sta iniziando a riavvolgere il sistema windovs 10 64 bit
Thank you SO much! What a strange Trick - but it worked instantly!
You are welcome.
In my windows 10 laptop, the connector is showing as "other device" not under "ports" like it was showing in the video. Why is my device unable to identify the cable as "serial adaptor" and rather identifying it as an external usb device?
First, can't you continue from that point even it shows as "other device"? I am not sure why you see it that way but perhaps you have got different deice.
Thanks! You saved my settings
Glad I could help!
I have a Baofeng T1 radio, factory reset. my problem is the reset and the display shows me 19 666.666 I do it with the up and down arrow and it does not show me more than the frequency 19. I am doing wrong or what happened inside the software I do not actually see set com3. and in the program (P) section followed by Read data From InterPhone (R), only one frequency comes out and nothing is seen anymore I want the 16 frequencies to be seen. I already installed firware on my computer, and updated flash. what will be
Hi, I read this comment 3 or 4 times. and did not get it. the video is about USB driver but you talk about Radio.
@@robojax
I already solved my own question with another yutuber
thanks a million, great and simple solution. God bless you!
You are welcome. God bless you too.
Awesome, thanks! I have Windows 10. It was the prolific333 download which fixed it for me.
You are welcome.
Thank you so much this really helped me and saved time :D:D:D
Thank you so much! I have a very old Haicom GPS receiver and couldn't find any driver that would work. Your solution did and now the GPS data is ticking in! Can I host your file an solution as a mirror (backup)? I will of course give you all credit and link to your website.
you are welcome. yes you can.
Thank you!! Help me a lot 😉👍
hI! Thank you so much! Solve my problem in Win10 S4 version... save my day! Thanks
good to hear that. You are welcome.
خدایی حلالت.دمت گرم.very very helpful.thanks a loooooooooooooooooooooooooooooooooooooot.
سلامت باشید آغا محمد. خیلی خوشحالم که مفید واقع شدم. You are welcome.
سلام علیکم. مجرا (کانال) فارسی علم و فن را راه اندازی کردم: لطفا به دوستان تان خبردهید و حمایتم کنید.
www.youtube.com/@ilmofan
Thank you so much, you just made my day!
You are welcome. I am glad to be helpful.
Sir, past days I unfortunately uninstalled the device usb prolific from device manager. Now, when I connect the device to usb port it doesn't appear on device manager anymore, so I can´t neither update the device because device prolific appears no more on device mngt. What should I do?
I have no idea why it doesn't work with your USB. Either your chip is different or something else like other software is changing the settings. Try it on another computer.
Many thanks, I had to update my driver. Thank you
You are welcome.
Sir it worked perfectly yesterday (that 2009 driver after reboot) , and today again the same issue its not working, what should i do now, plz help
Your windows is updating the driver. I am not sure how, but you have to turn OFf or delete the old drivers.
@@robojax thanks Sir atleast you have responded, no one here reply to people's concern, thanks a lot, and the issue is solved again i saw another video that uses a driver from 2007 now its working perfectly, now i m hoping the issue don't come back
You are welcome.
you are a star.. u saved my ass .. thanks bro
tnks bro...saved a lot of time .
You are welcome.
thank you so much for the great efforts its working
You saved me man, thanks
Please subscribe. That helps me.
Really helpful, thank you, it works perfectly now.
You are welcome.
The only solution that worked for me.
Good to hear that.
Excellent, thank you. This fix worked.
you are welcome.
Hello sir ! I done all steps through admin login its working fine but after restart my pc i face same issue . what should i do next?
Hello, interesting. You would have to find out the drivers for the device in BOTH working and AND non-working condition . so when when you fix it, on device manage click on the the device and follow this snag.gy/JY4qsV.jpg and write down the files (4 or 5 or more files) and then restart your computer and when it when you got the NON-working condition, again check the files and see what is the difference and which files are responsible for non-working condition and remove them. Try this. If you are unable to delete files, search RUclips on how to delete files
thanks its working
works just fine. thank you!
You're welcome!
Excellent help through the artificially created M$ Windows jungle!
Thank you.
Fixed my issue thanks a bunch
You are welcome.
Thank you very very much. that was professional.
you are welcome.
The Download prolific driver link doesnt work?
Just tested it and it works. Use different browser if you have problem.