Be better tig welded, they'll be spatter going all over the speaker dome, also tig welding you can keep the temps down to avoid damage to the speaker and have a lovely weld after, I've done a few of these now to a very high standard theres a guy in germany does them, I beat his prices. 😉
I have an aftermarket Maxhaust active sound system. If I wanted the same sound from an original SQ5, are any of the parts/modules interchangeable does anybody know?
Hi I did the same looked all over to no avail, the OEM speaker had a sticker on made in Italy that' all. I fitted marine grade 6.5 inch good branded as I think the will last longer. I am unsure about the ohm rating but the the 4 ohm ones Ive fitted perform handsomely, I am doing sq5 this weekend I will check the ohm rating of the OEM speaker that I remove and I will let you know.
hi! the OEM loudspeaker is not coaxial. Pioneer model is coaxial with 2 way .... that means the final sound is with more middle and hi .... it doesn't sound like the original one anymore.
Do you know if the sound actuator module/speaker unit is available as a spars part or from an OEM without the rest of the exhaust? Several aftermarket companies seem to have been able to source these
Hi pal Love the video very informative. I have a audi sq5 with the same problem the exhaust speakers aren't working. Do you provide a service to fix these as well as the maserati ones.
This is very informative! My active sound of my Maserati Ghibli diesel died on me yesterday. How do you determine that the speakers are the problem? I mean, there are two… thx in advance!
Hi Connect ohmeter should be 2 ohms Or connect hifi speaker to exhaust or connect amplifier to exhaust speakers music should come out of exhaust It will be exhaust speakers 99% sure I've replaced loads Regards
Sorry never found out the ohm rating of the oem speaker every single one i have replaced has been open circuit Quite frankly the Oem speakers are absolutely rubbish!
Many thanks for sharing this video! I have been scratching my head trying to find a solution and like @Paulwhiteside, I have an SQ5 with a blown speaker. Unfortunately I am based in NI so not acessible to yourselves but can you advise what speakers are required for the SQ5? P.S. Its a 2015 model Many thanks
Well done 👍 I have the same problem in the my Maserati, now I know how to fix.... thanks
Thank you
Have a go at the repair it's been a success and I have done the repair for others.
Be better tig welded, they'll be spatter going all over the speaker dome, also tig welding you can keep the temps down to avoid damage to the speaker and have a lovely weld after, I've done a few of these now to a very high standard theres a guy in germany does them, I beat his prices. 😉
0:43 see the poster hanging on wall
seriously its not good idea bc this speaker do 25 watt rms its shit sound but good job for work
I have an aftermarket Maxhaust active sound system. If I wanted the same sound from an original SQ5, are any of the parts/modules interchangeable does anybody know?
How many amps on the arc welder ? And what diameter rod ? Thanks
40 amp 1.5mm electrode
Hi, I looked up all over the internet and I can't see the specs for the OEM speaker, do you know them?
Hi I did the same looked all over to no avail, the OEM speaker had a sticker on made in Italy that' all. I fitted marine grade 6.5 inch good branded as I think the will last longer. I am unsure about the ohm rating but the the 4 ohm ones Ive fitted perform handsomely, I am doing sq5 this weekend I will check the ohm rating of the OEM speaker that I remove and I will let you know.
which do you prefer pionner ts-mr2040 or pionner 1600
hi! the OEM loudspeaker is not coaxial. Pioneer model is coaxial with 2 way .... that means the final sound is with more middle and hi .... it doesn't sound like the original one anymore.
I have a Maserati Ghibli diesel (2016) with same problem, do you undertake repairs? I am based in near Kendal and would be prepared to travel.
Do you know if the sound actuator module/speaker unit is available as a spars part or from an OEM without the rest of the exhaust? Several aftermarket companies seem to have been able to source these
A nice high melt point Pb free solder might be best….
Got a spare one to fit my black 159 ti, new ones are out of my reach lol
Does the original rubber seal is put in too?
Hi pal
Love the video very informative.
I have a audi sq5 with the same problem the exhaust speakers aren't working.
Do you provide a service to fix these as well as the maserati ones.
Thanks for your kind comment. These speaker pods are on numerous cars BMW Audi Maserati Volkswagen
I do consider repairs
Why didnt they use a rubber sealand clips rather than welding at the original factory.
That would have been a super idea
This is very informative! My active sound of my Maserati Ghibli diesel died on me yesterday. How do you determine that the speakers are the problem? I mean, there are two… thx in advance!
Hi
Connect ohmeter should be 2 ohms
Or connect hifi speaker to exhaust or connect amplifier to exhaust speakers music should come out of exhaust
It will be exhaust speakers 99% sure I've replaced loads
Regards
@@alfaspiderman3591 thx for the quick response! 🙏🏼
Good a
God bless
Hi, does the new Pioneer speaker last? I heard rumours from some that they will break again after some months because of water.
I would expect so they are marine grade used for boat's
@@alfaspiderman3591 Also can I use Pioneer TS-MR1640 which can receive more power than TS-MR1600?
@@BLOADD yes you can I've installed plenty of the 1640s
you win only five watt rms you will 30 xd@@BLOADD
Is the OEM speaker resistance 4 Ohm?
Unsure but will let you know as I am doing Audi SQ5 shortly
Sorry never found out the ohm rating of the oem speaker every single one i have replaced has been open circuit
Quite frankly the Oem speakers are absolutely rubbish!
Original speaker are 2 ohm
Many thanks for sharing this video! I have been scratching my head trying to find a solution and like @Paulwhiteside, I have an SQ5 with a blown speaker. Unfortunately I am based in NI so not acessible to yourselves but can you advise what speakers are required for the SQ5?
P.S. Its a 2015 model
Many thanks
The speakers in the video will fit your sq5 I've done loads of sq5s
Thanks for you comment have a go yourself
@@alfaspiderman3591 Your an absoulte gentleman, thank you very much and keep up the informative videos!