- 2 ganchos de brinco - 2 x 6 cordões de poliéster encerado, 1 mm de espessura e 40 cm (15,7 polegadas) de comprimento cada - 2 contas de cristal com diâmetro de 12 mm - amor e paciência ^^
Preciosos los pendientes, los hice y la pulsera a juego y me ha quedado un conjunto muy bonito, muchas gracias por tus vídeos y por compartir tus trabajos
After attempting to try to make these gorgeous earrings for a week now and reading the comments here, I think it would be helpful if you bring the camera down a little so we can see what your hands are doing. There is a lot of empty space at the top of the picture but we can not see your hands as they are cut from view. I get a little confused in the same space another viewer had quoted. Also, could you please comment on how you perform the 11 knots? Do you just do 11 over hand knots or are you switching the two cords as to which one is over the other with each knot? Your rows of knots look so neat and it would appear you are somehow knotting the cords one way then another? I appreciate your comments on this as I really love your jewelry and would real love to make these earrings!!
Hello Grace. Thank you for your feedback. This video of mine is old, it has 3 years, i think, when I still had some issues with the process of filming, but because of comments like yours I think I managed to clean most of my mistakes. So, if you like, go and check some newer videos of mine. Unfortunately I don't have the possibility in RUclips to edit already posted video, so for this one the issue will remain. In my older videos when I'm writing "Make 11 knots"or 3, or 6, no matter the number, it's corresponding to "Make 11 single half hitch knots", one on one side, one on the other side, but I never change the working cord. The working cord is always the same, only the direction of knitting is changing. I hope this could help you! ❤
I am getting the supplies together to make these earrings. What type of board are you working on? I was thinking of getting a piece of cork board about 1/2” thick. I lost all of my crafting supplies in a flood and need to start over, I did some macrame over 40 years ago and would like to try to make some earrings and bracelets as gifts. Thank you for your hard work and videos❣️
Hello Barbara. Actually i am not using a macrame board. I have never used it. For all of my videos I am using a pillow and pins. If you're used to a macrame board, go for it, it's not a problem. But a pillow with a stiffer foam filling will work the same. ☺️
Hi, I love these earrings. However, I am having trouble following your hand movements when you are making the knots. What are the names of the knots used, and is there somewhere I can find a printed step by step diagram. Really want to make these. Thanks
Hello dear. Here I am using only double half hitch knots and maybe in the center some backward knots (reverse double half hitch knots). If you can't follow the tutorial because for you it's fast you can change the speed from the settings of the video.
Thank you for the great video. I've tried with 1mm wax cord but only one thread can go through my beads... Do your beads have a bigger hole? (maybe my cords are too thick?) the earrings are so beautiful 🧡🧡
Hello dear. Here i am using flat waxed polyester cord. Even if it is 1 mm thick you can put up to 2 cords through the hole of the most common crystal beads, but the cord must be flat.
Hello Robina. It depends what effect you want to achieve. If you want to point on the stone, you can still use 12 mm one, but if you want to be more unified I'll suggest to put smaller bead.
This was my first proper micromacrame attempt with nylon cord. They turned out better than I could have hoped. Thank you :D
Thanks dear! Great to hear!
- 2 ganchos de brinco
- 2 x 6 cordões de poliéster encerado, 1 mm de espessura e 40 cm (15,7 polegadas) de comprimento cada
- 2 contas de cristal com diâmetro de 12 mm
- amor e paciência
^^
This as so much FUN!!! Thank you!
Beautiful work gonna give it a go 😀
Thank you 😊
Thank your for this tutorial. So beautiful
I made them yesterday !!!! Great tutorial !!!!
Preciosos los pendientes, los hice y la pulsera a juego y me ha quedado un conjunto muy bonito, muchas gracias por tus vídeos y por compartir tus trabajos
I love them!!!
Thank you for this tutorial. I made them and I'm in love :)
I made one of this just now and it is indeed super easy but turned out lovely.
Thank you so much Rea!
Super easy and super beautiful, as always. Love your creations, they are happy and alive. Thank you
Imma, thank you from the bottom of my heart! ❤
Beautiful like them
Precioso, me encanta👍👏👏
Gracias por compartir. Saludos!
Quise decir... Precioso!!
Lindos brincos, amei fazê-los!
Qual fio vc usou?
beauuuutiful, thanks!!!
Wowww
After attempting to try to make these gorgeous earrings for a week now and reading the comments here, I think it would be helpful if you bring the camera down a little so we can see what your hands are doing. There is a lot of empty space at the top of the picture but we can not see your hands as they are cut from view. I get a little confused in the same space another viewer had quoted. Also, could you please comment on how you perform the 11 knots? Do you just do 11 over hand knots or are you switching the two cords as to which one is over the other with each knot? Your rows of knots look so neat and it would appear you are somehow knotting the cords one way then another? I appreciate your comments on this as I really love your jewelry and would real love to make these earrings!!
Hello Grace. Thank you for your feedback. This video of mine is old, it has 3 years, i think, when I still had some issues with the process of filming, but because of comments like yours I think I managed to clean most of my mistakes.
So, if you like, go and check some newer videos of mine.
Unfortunately I don't have the possibility in RUclips to edit already posted video, so for this one the issue will remain.
In my older videos when I'm writing "Make 11 knots"or 3, or 6, no matter the number, it's corresponding to "Make 11 single half hitch knots", one on one side, one on the other side, but I never change the working cord. The working cord is always the same, only the direction of knitting is changing. I hope this could help you! ❤
Thanks for your reply! That does help. I have subscribed to your channel and will definitely look for the updated videos! Your work is lovely!
This is so beautiful I hope to do my someday
I absolutely ADORE all of your creations and am so grateful for your tutorials!!! 💖💖💖💕💕💕
Thank you so much Rhonda. This really means a lot to me!
I am getting the supplies together to make these earrings. What type of board are you working on? I was thinking of getting a piece of cork board about 1/2” thick. I lost all of my crafting supplies in a flood and need to start over, I did some macrame over 40 years ago and would like to try to make some earrings and bracelets as gifts. Thank you for your hard work and videos❣️
Hello Barbara. Actually i am not using a macrame board. I have never used it. For all of my videos I am using a pillow and pins. If you're used to a macrame board, go for it, it's not a problem. But a pillow with a stiffer foam filling will work the same. ☺️
@@bijoumadame WOW, I love it, the firm pillow. Thank you.
Hi, I love these earrings. However, I am having trouble following your hand movements when you are making the knots. What are the names of the knots used, and is there somewhere I can find a printed step by step diagram. Really want to make these. Thanks
Hello dear. Here I am using only double half hitch knots and maybe in the center some backward knots (reverse double half hitch knots). If you can't follow the tutorial because for you it's fast you can change the speed from the settings of the video.
Thanks! I learned something else new. I never knew I could slow the video speed. Lol. That will help with other tutorials. Much gratitude.
Good job
Thank you for the great video. I've tried with 1mm wax cord but only one thread can go through my beads... Do your beads have a bigger hole? (maybe my cords are too thick?)
the earrings are so beautiful 🧡🧡
Hello dear. Here i am using flat waxed polyester cord. Even if it is 1 mm thick you can put up to 2 cords through the hole of the most common crystal beads, but the cord must be flat.
@@bijoumadame thank you for your answer mine is round and they don't fit.
I'll look for the flat cord thank you so much 🧡🧡
Lindos parabéns
Eu queria muito saber qual fio você usa
Flat waxed polyester cord for leather sewing ☺️
I love your tutorials and wanted to try this one. The cord I have is .5mm so should I use a smaller stone than 12mm if the cord is smaller?
Hello Robina. It depends what effect you want to achieve. If you want to point on the stone, you can still use 12 mm one, but if you want to be more unified I'll suggest to put smaller bead.
Bijou MadaМe thank you! I’m excited to try it! It’s so beautiful!
is there something I'm missing just find it so frustrating when you do the chain as not sure where the cords are suppose to be when you twist.
I'm putting the earring hook in the small circle I just knit, while the last 2 working cords are remaining one from left side, one from right side.
🙏😍💕💪🇧🇷
En el minuto 9:47
Hi what type of cord have you used ?
Hello Irene. Here I am using flat waxed polyester cord, 1mm thick
@@bijoumadame thanks they are lovely 😍
what type of cord are you using?
Flat waxed polyester cord, 1 mm thick
So fast! Hard to tell of you are using overhead knots or square knots.
Hello Valerie. If you have some problems with the speed of the tutorial you may always change it from the settings of the video. Thank you!