Great, a recent video on this rifle. What's your opinion on cilinder volume versus barrel volume? I've been looking into this rifle but the very short cilinder has got me doubtful, especially with a 550mm inner barrel, that's a lot of air. Can you do a joules test between the 0.20 and 0.40 bb's?
Hi Howler, I think the striker would be improved with a larger cylinder if you were going to keep the 550mm barrel. I see a lot of Striker's with short barrels nowadays and for good reason. From everything I have read and seen it really helps. However with the stock rifle you can easily get accurate range of at least 60m. With additional upgrades you can start going 80m plus. I plan on trying a shorter barrel soon so please watch this space. I will do a joules test and let you know how I get on. Things to help joule creep though would also be a heavier piston. Different style piston heads (cup/plunger), the tightness of your inner barrel will also help with heavier bb's. Hope this helps.
What's the thing called the you put in the hop up spot adjust hole in the top and will it work with the stock hopup? And will you be able to use vsr 10 hop rubbers on the stock gun and the gun after the hop upgrades
I think you mean the Hop up adjustment screw. Its basically a little grub screw with an allen key fitting. And yes the striker will take the vsr 10 hop rubbers both before and after. :)
Hi Kyle, I recommend this PDI W Hold Hop-Up Rubber Chamber For AEG Airsoft. It was recommended to me by the retailers that I bought my upgrades from. It works great and was under £10.
I had the same problem. I had to omit the two side screws that attached and held the barrel in the hop up. Only the bottom screw is holding mine in. I’m still having issues with mine, hence why I’m here.
I personally would not bother with the Diablo hop up. I don't think the Action Army can be beaten IMO. The miracle barrel looks good though and might help. Its slighter larger bore might prevent any jams and from what I have seen will give you consistent grouping on your shots.
cara tem pecas p Striker na KPP do Brasil, ees estao fazendo cilindro e pistao, mas eu compro da BESPOKE.COM ou HPAIRSOFT.CA, nesses dois tem tudo q precisa, no ebay tb acha. tks
Thank you this video helped me upgrade my sniper
Good job, been waiting for someone to do this, cheers.
Thank you very much. I am trying to get better at these videos. Anything else you would want to see upgraded?
I'll think about it lol.. Do you think you could get 500+ out of the ares striker?
craggles1969 I think so. And I will be working towards that. Don't worry I will document my progress.
After a cylinder upgrade and a new spring you are more than capable of shooting over 500fps with a Striker.
I know this is a older video but well done! I'm looking to upgrade my Ares Striker AS01's hop up chamber and bolt.
Great, a recent video on this rifle.
What's your opinion on cilinder volume versus barrel volume? I've been looking into this rifle but the very short cilinder has got me doubtful, especially with a 550mm inner barrel, that's a lot of air. Can you do a joules test between the 0.20 and 0.40 bb's?
Hi Howler, I think the striker would be improved with a larger cylinder if you were going to keep the 550mm barrel. I see a lot of Striker's with short barrels nowadays and for good reason. From everything I have read and seen it really helps. However with the stock rifle you can easily get accurate range of at least 60m. With additional upgrades you can start going 80m plus. I plan on trying a shorter barrel soon so please watch this space. I will do a joules test and let you know how I get on.
Things to help joule creep though would also be a heavier piston. Different style piston heads (cup/plunger), the tightness of your inner barrel will also help with heavier bb's. Hope this helps.
cool guy
Would this make my rifle more accurate?
did you add bridge on your inner barrel
The little rubber piece is lost. The one that goes with spring in hop up. What do i do to fix???? Please help.
Can you do one on the ASG M40A3 sportline? The $80 US rifle?
That could be on my list for this year. ;) Got a few other guns in mind first though.
I’m new to this and have a AS01 I’m wanting to upgrade it to its maximum performance can you please help
What's the thing called the you put in the hop up spot adjust hole in the top and will it work with the stock hopup? And will you be able to use vsr 10 hop rubbers on the stock gun and the gun after the hop upgrades
I think you mean the Hop up adjustment screw. Its basically a little grub screw with an allen key fitting. And yes the striker will take the vsr 10 hop rubbers both before and after. :)
WolfskyUK thank you for clarifying and do you have any good hop up rubbers to increase accuracy for not to much?
Hi Kyle, I recommend this PDI W Hold Hop-Up Rubber Chamber For AEG Airsoft. It was recommended to me by the retailers that I bought my upgrades from. It works great and was under £10.
Search for it on ebay and it will come up for you.
WolfskyUK thanks man I'm hopeing to get my rifle sometimes in April I'm hoping to do the upgrades you did but I'm short on money because school
Whats that hop up screw called, and where can I get it
Is anything done differently if you are using a maple leaf bucking?
How is that hopup working for you. Also, what inner barrel did you get from edgi?
Did you change the spring prior to this video? I see the Chrono at the end at 420 fps
Can you use this on as-02
what size thread is on the barrel?
How have the heavier bb's been flying for you? I've heard people not being able to get good distance out of the heavier ones.
Does anyone know if the maple leaf 70 degree bucking will work with the stock barrel and hop?
I'm unable to fit the spiral fluted oute barrel on the gun after installing the hop up unit, does anyone have a solution?
I had the same problem. I had to omit the two side screws that attached and held the barrel in the hop up. Only the bottom screw is holding mine in. I’m still having issues with mine, hence why I’m here.
@@helpdeskjnp there is a part of the barrel on the inside that is blocking the hop up unit from going any deeper than it is right now
Im assuming this hop up unit wont accept AEG barrels
I am afraid not fella.
WolfskyUK ok thanks whats ur thoughts on using a hop like the angel customs “Diablo” and a miracle barrel in a striker ?
I personally would not bother with the Diablo hop up. I don't think the Action Army can be beaten IMO. The miracle barrel looks good though and might help. Its slighter larger bore might prevent any jams and from what I have seen will give you consistent grouping on your shots.
WolfskyUK its listed as an AEG barrel tho
do you sell it?
Hello, where can I buy these and other pieces to send to Brazil? Thank you.
cara tem pecas p Striker na KPP do Brasil, ees estao fazendo cilindro e pistao, mas eu compro da BESPOKE.COM ou HPAIRSOFT.CA, nesses dois tem tudo q precisa, no ebay tb acha. tks
u didn't airsealed the hop up rubber with teflon tape around ... u can win more fps
70$ upgradw