I counted 8 on the lower left image, 5 standard top left, 7 to right image and 6.25 on bottom right. Bottom left setup wins for cycling speed and shots count.
Best is 140% spring, up to 4 buffers two washers, and a 4.3 guide rod, that’s the fastest setup for anyone wondering (140% for metal slides, 110% for plastic ones
There’s faster setups. But even then not really any point to go with 4 buffers since it’s physically not possible to pull the trigger fast enough to matter, and more likely to have feeding issues.
I've got a WE Dragon B split rail 5.1 full auto Hi-Capa, so mmm looks like I'm going to be baking one of these recipes soon; it's still stock at the moment.
Hey hey, got any comments or maybe a video breakdown on the CCT aluminum nozzle? There's tons of inconsistent info on alu nozzles from forums and reddit posts, but wondering how it's working out for ya!
Short stroking won't majorly impact fps unless you have issues with the nozzle coming out too early, and none of these do as you can see in the vid. This video wasn't shooting into a chrono, but this build shoots at consistently around 85m/s .25s Ref here: ruclips.net/video/t3pyQPttNaY/видео.html
I counted 8 on the lower left image, 5 standard top left, 7 to right image and 6.25 on bottom right.
Bottom left setup wins for cycling speed and shots count.
This is by far the best and easiest comparison Video i saw !! N1
Thats actually a cool video seeing all these side by side👌🏻
Wealth of knowledge in this ten seconds.
Best is 140% spring, up to 4 buffers two washers, and a 4.3 guide rod, that’s the fastest setup for anyone wondering
(140% for metal slides, 110% for plastic ones
There’s faster setups. But even then not really any point to go with 4 buffers since it’s physically not possible to pull the trigger fast enough to matter, and more likely to have feeding issues.
this is deadass what i am running right now and thought i could get more or if it was too much
what spring for the nozzle tho?
@@christianvillarroel980 it may be 140%, usually is best to use the same force on nozzle and recoil spring
I've got a WE Dragon B split rail 5.1 full auto Hi-Capa, so mmm looks like I'm going to be baking one of these recipes soon; it's still stock at the moment.
I want that set up, slide and barrel. Where can I get it brother? She looks 🔥
Hey hey, got any comments or maybe a video breakdown on the CCT aluminum nozzle?
There's tons of inconsistent info on alu nozzles from forums and reddit posts, but wondering how it's working out for ya!
They flip down compared to real guns, never knew that.
Which one kicks the hardest?
How is the felt recoil between them?
Are you using alumunium nozzle?
i use a 140 spring and 4 buffers 💀
What are the fps readings for all 4?
Short stroking won't majorly impact fps unless you have issues with the nozzle coming out too early, and none of these do as you can see in the vid.
This video wasn't shooting into a chrono, but this build shoots at consistently around 85m/s .25s
Ref here: ruclips.net/video/t3pyQPttNaY/видео.html
any conclusions? xD
Yo