✅Timer for Pool Pump ⏰| How to Setup, How Long to Set, & How Does it Work? Pool Pump Variable Speed
HTML-код
- Опубликовано: 28 сен 2024
- ➜amzn.to/3cXbOws or ➜ebay.us/qLtsw0 pool pump timer are such a simple was to have you pool come on an off automatically daily.
✅Best Pool Pumps ➜amzn.to/44dqFOr or ➜ebay.us/bz8zIL
✅Skimmer Basket ➜ • ✅Best Pool Skimmer Bas...
✅Fix Cloudy Green Pool Water ➜ • ✅How To Clear Up A Gre...
This improves water chemistry because the flow of the water will mix all the chemicals in the water evenly and allow the pool pump filter to run! My pool pump system has a chlorine tablet feeder built inline so when my pool pump comes on the water get chlorinated automatically. While your pool is on it allow your skimmer to capture excess floating debris on top and can reduce the amount of pool vacuuming you do. This does not mean you won't ever have to brush or skim your pool! Hope this video helps you figure out how to set up a pool pump time or how a pool pump timer works? I run my pool pump for about 8 hours per day and some people run their pool for 12hrs or more. It really depends on your are and pool setup. A strong pool pump is essential for good filtration and flow. My pool pump died 2 years ago and this is a new one that I have called a BlueWave Flow Extreme NE4521. I heard a few people had issue with this pool pump but I have not had any issues at all. I've ran my pool for hours daily and used to vacuum at highest speed flawlessly. If anything happens I'll be sure to keep you all updated in another video. Down below are some great deals on pool pumps.
➜ebay.to/3d6fKem or ➜amzn.to/2N0ve9k
Thank you it is very helpful . I watched others' video but it didn't mention how it works and set the time.
You're welcome! Thanks for watching!
Question - do you always keep your switch on auto or I should say on or does it do it automatically when the time comes around?
You keep the switch on initially and then it will automatically cycle on and off depending on the spacing of the tabs for your desired time to run.
Very helpful! Thank you!
Glad it was helpful!
Hi. May I know what is your setting with the filter?
My and filter is set to filter. When I vacuum I have it set to waste and when I use flocculant I set it to recirculate. Hope this helps.
Great video
Does the pool pump need to be on to program the timer?
If you want the timer to work that pump must be turned to the "ON" position. The timer turns the main circuit ON/OFF automatically once you set the times.
Omg thank you so much. I couldn't find the answer to a question until i I watched your video.
How I put those little metals 😭😭😂
It just clamps on the metal wheel & you screw them down tight.
Finally a good explanation. Showing me which direction the yellow dial turns help tremendously thank!
Thanks for the feedback & for watching!
If you want to run the pump continuously for a few days how to you go about using the timer? Do you remove the “off” stopper?
I have the same question. How do we make it run 24 hours during freezing weather?
Yes if you remove the stoppers it will run continuously until you manually turn it off. You could leave your current settings and wired to a wireless switch so you can control when the pump comes on or off even if you aren't home.
This the best video I found straight to the point, simple and clear! Thanks so much ! 🙏
Glad to hear that! Thanks for watching!
Am I supposed to leave the timer on “off” after I set my time That I’d like for it to be on?
Depends on if you are in the begging of a cycle or in the middle of the cycle. You can leave it off and it will trigger automatically to come on when the 1st notch hits and when it gets to the 2nd notch it will turn off automatically. The time acts as a switch. If you have a switch on your pool pump you need to make sure that is turned on or the time can't turn it on.
This is very helpful… ¿question? I have an above ground pool, the Hayward pump with swim-pro filter… along with zodiac nature vision pro and Hayward heater… they were all hooked up via installation to this box or off this timer box… would have them on a timer blow any of the motors out by they being flicked on and off like this? Sorry I am VERY new owner (got the pool Thursday) and the company is NOOOO HELP!
It wouldn’t blow any of the motors. Most pool pump motors have their own on/off switches. The pool pump timer acts as a main breaker switch but on a timer. If you want the system to work you must turn your pool pump on & then adjust your timer accordingly so it can turn on and off at specific intervals.
What do you mean about the "highest setting is best for vacuuming out your pool? I had another question, my pool guy changed my pump from 1HP to 1.5 and it went from 10 on the thermostat to 20 and so when it hits 30 I clean it, but I heard it was not good. I didn't know, the guy said the 1.5 would take care of the pool. Also, it is better to run the pool at night, my bill including running the pump during the day and air conditioner 500 dollars, so that is the highest since living here 30 years.
My pool pump has a high & low setting which means more gallons per minute on high vs low. The high setting is great for vacuuming the pool bc it gets up all the debris.
1.5hp seems like plenty of power. I always try to consult a pools specialist & match the specs of my previous motor.
When it comes to running my pool on most of the day I just keep it on the low setting. If i just shock the pool I use the high setting to get the chemicals churning faster. It is really preference though.
So my new pump came with a prong plug however I noticed my failed pump is hardwired to the timer. What do I do???
I personally would hire an electrician. I replaced my pool pump years ago & it wasn’t too challenging.
📌Skimmer Basket ➜ruclips.net/video/YoP_JTNm3yU/видео.html
📌Fix Cloudy Green Pool Water ➜ruclips.net/video/nwPk_mnwtVY/видео.html
📌Best Supplies for Pool:
✅Best Pool Pumps ➜amzn.to/44dqFOr or ➜ebay.us/bz8zIL
✅Pool Shock ➜amzn.to/30JvMbp
✅Pool Socks for Skimmer ➜amzn.to/3fqKJU8
✅Pool Tablets ➜amzn.to/2BZ6LyH
How can I turn off the timer? I have drained my jaccouzzi and don't want it to turn on for a few days until I've finished working on it. So many videos about this and none say how to turn the thing off! My pump does not have a button.
I would remove all the notch triggers that screw onto the wheel timer. I flip the time switch to the off position.
@@VibrantDeals thank you. The notch triggers are removable? I loosen them to move them but haven't felt it coming out.
Question. I removed all the notches and flipped the switch to off. But I feel like the pool is still running. Do I need to turn off the pool pump?
What if you see a flash of light when it turns off.
It could be the circuit arcing causing a possible spark.
Awesome video thanks!
Glad you liked it! Hope it was helpful.
Excellent, thank you!
😉
Thank you!
You're welcome!
Is there a way to set it to come on 4hrs during the day and 4 hrs at nights? Thxs
Yes, but you have to buy additional "time switch trippers" from Amazon or somewhere.
Absolutely, you just need 2 more metal switch trippers which would all you to run your pool as you see fit.
Thank you I always been nervous touching this since my dumbass got shocked few times trying to figure this out. 😅😅
Thanks for watching! Be safe out there lol
Thank you
No problem thanks for watching!
excellent!
Thanks!
This is so helpful, thank you!
Glad it was helpful!
Great video. I'm not familiar with this set up but I'm wondering when you set the time to the current time, shouldn't it be like a clock and progress. Mine is set on a time and it never changes on the dial which make me wonder if it is working.
You can set it like a clock or trigger it to start immediately and stop where ever you have your end notch at.