KATOOL KT-AS110D 11,000lb 2 post lift. 12 foot top bar, Single point release, 3HP 220v assembly
HTML-код
- Опубликовано: 13 сен 2024
- KATOOL KT-AS110D 11,000lb 2 post lift link: autool.us/prod...
Save $100 using code Motocheez10 at checkout on any 2 post lift from Katool
KT-AS110D 11000lbs Two Post Asymmetrical Vehicle Lift
*Concrete thickness must be at least 5.9” (150 MM) with a 3000 PSI rating. Failure to install this lift on the proper concrete could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation.
11000lbs (4990KG) lifting capacity
CE Approved and Certified. It has adopted the 115% dynamic loading capacity standard and was 150% static loading capacity tested
Single Point Lock Release
Asymmetric arms
Direct Drive Cylinders
Rubber pad door opening protection
Comes with adjustable extended support adaptor sets that range from 3.94 inches to 6 inches.
Overhead safety shutoff bar
Feet-protection safety guardrails with toolbox
High-quality hydraulic system with 220V/60HZ/1PH or 110V/ 60HZ/ 1PH (Optional)
Lifting Capacity 11000 lbs. (4990KG )
Max. Lifting Height 70.75" / 1800mm
Min. Height 3.74" / 95mm
Height Overall 141.25" / 3587mm
Width Overall 134.65" / 3420mm
Outside Columns 120.4" / 3058mm
Inside Columns 109.37" / 2778mm
Drive Thru Clearance 99.61" / 2530mm
Motor 3HP 220VAC/60HZ/1PH
Net Weight 1323lbs / 600KG
SHIPPING POLICY: Please read carefully Freight shipping ONLY within the lower 48 states. Two post-lift products require a shipping fee ($590/piece) to commercial addresses only. Remote areas may be charged extra for shipping. Please confirm before delivery. Shipping carriers may charge extra for residential Delivery. THE BUYER IS RESPONSIBLE FOR UNLOADING FROM THE TRUCK. Customers should consider Forklift and unloading dock services. The buyer should be also responsible for any re-delivery charges. Buyers should inspect delivered the products carefully before signing the Bill of Lading or Delivery Receipt at the time of delivery. Buyer satisfaction is assumed if no damages are noted on the delivery receipt.
Garage Part 1: • PT1 Concrete slab. 30x...
Garage Part2:
This metal building Is 40x30 feet with 12 foot walls, 3 roll up doors w chains, 1 entry door and 5 windows. I did this video to help others know what to expect and how long the process takes in Citrus County, Florida.
The concrete slab is 4 1/2” thick fiber reinforced with a 3x3 footer and the dirt underneath is clay termite treated to meet local codes in Citrus county.
Garages, carports contractors and permit service: Jan's carports: 352-220-2607 (Carports anywhere)
Tree removal: Dave 352-422-3430
Foundation work and prep: Dan Eno Concrete 352-212-3492
Most my videos were used from my Solar Reolink Duo auto tracking cam (Amazon affiliate links) amzn.to/3NewogW
and Solar Duo cam, 180 wide angle cam: amzn.to/3RaUPgt Excellent protection!
So since I am not full time in Florida yet, I had to rely on my security cameras to capture many of the videos, I think they did an EXCELLENT job! What do you think?
Affiliate Links: (helps my channel) Thank you
Ordro EP7 Head camera: amzn.to/3aWkNiW
Reolink 4MP HD Plug-in Security Camera Indoor Wireless: amzn.to/3k2lFGE
Reolink Argus PT w/ Solar Panel wifi cam:amzn.to/3pthaHm These are my favorite solar cams.
CloudEdge ieGeek fixed solar wireless cam: amzn.to/3kuEReC this one is decent..
(GARBAGE) Yi Goowls wifi 2-Pack 1080p indoor cams: amzn.to/38EfSDd these acting weird lately, CONFIRMED...
Eufy wifi security doorbell cam: amzn.to/2UpfPTz
Crystal River area is a nice quiet old Florida kind of town so we have been visiting there for the past several years and started looking for property. We finally found something very inexpensive with an old Mobile Home on it, so electric, well and septic included (no $6000 impact fees) and pulled the trigger.
Follow along on our adventure to fixing up this old crappy trailer into our winter vacation home paradise! (Casa De Cheez)
Due to changing products, links, etc, If you want the most recent product links (if these are no good), go to www.motocheez.com and click the section you're looking for (upper right) and scroll down the page for the item.
This keeps the links for all the parts more accurate. These I use and install on ALL my videos. I do not sell any of the items listed. (except T-shirts and key tags.. so you buy now!)
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez on....
Instagram: / motocheez
Facebook: / motocheez
Web: www.MotoCheez.com
I put mine up all by myself no lifting machines other than a floor jack. Installed it in one day. 10,000lbs Weaver lift.
Dayum! That's impressive
I was 70 years old when I did it 3 years ago
@alk5749 whoa. That's awesome
Huge thanks to Cheez for letting us use this lift and his shop to do a frame swap on a tacoma! Can confirm lift install was done perfectly and the lift itself is great quality and beefy as heck.
Sweet lift...I'm super jealous! I loved your creativity unloading the truck and moving the crate into your garage. Good thing you had the loader and several helpers. Looking forward to seeing this bad boy in action. Always love the Cheesy videos! 🧀👍
Thanks!!!
HI Cheez! I bought a Bend Pak 4-post 15-20 years ago. I'd buy one again in a heartbeat. Just don't tell anyone you've got one... Congrats, you will love it.
1st! Nice I like those fours post lifts too, maybe I'll get one of them later but they kind of take a lot of room. Yeah definitely don't tell anybody 🤣
That's shaping up to be a fun shop. Great vid Cheezy.
Thanks!
Oh boy. That's going to make your auto projects SO much easier now. Congratulations.
I'm 61 and would LOVE to have a lift. Sadly my garage is not big enough.
I hope so, thanks! I have one of them scissor lifts up north because my other garage isn't big enough and they work pretty good
The Cheezy Compound is coming along nicely. You need to get a big shop fan. I can feel that Florida humidity from Vegas.
Thanks, yes! It's on the list
Very cool, great price
Man thats badass!! Congratulations man!! Im sure you will be makin some set up to put the enduros on that! LOL
I am thinking about how to make something work
Awesome Family project!!! Your Mom helping where she can... Adorable! Great seeing your Son helping too! #CheezyFamilyProject!!!🤣
Yes!
Don’t be givin Mrs grandma Cheez any crap. Beautiful lift. You should be able to do some damage with that.
That was my mom! 83 and still working hard. I hope it does some damage!
I used to install lifts back in the early 90s. One thing I noticed here Cheesy is that you have plenty of head room. You could go to a qualified hydraulic shop and have them make you some new lines - taller/higher lines - to the exact spec as your motor requires. It might cost a couple hundred, but really not too bad. We used to do it out in the field with a tubing bender and a flare tool. That would allow you another what, 20" of height? (hard to tell from here) Anyhoo, nice job brotha. We never really 'need' a lift, until we've had one for awhile and it breaks down then we realize just how nice they are. Congrats man, lookin good.
That is a great idea! Fabricating and extension to go up another two feet to raise the bar , no pun intended, would be great for the taller vehicles to reach maximum height. The arms only lift 6 ft so the problem would only be with vans and taller vehicles. The Rubicon my son put on almost reach maximum height within 1 in or so before it hit the safety bar.
The only problem is I'd have to get extended steel cables along with the hydraulic hoses
A great tool to add to your collection ! The shop is so different from your house garage up north . It was tight ,but you always made it work , and somehow you knew where everything was .good show Moto !…..
I know, I won't know what to do with all the space now
@@MotoCheez we have confidence you won’t have any trouble making it homey , when I was delivering concrete for pole barn and big garage buildings sometimes the owner would say I hope I didn’t make it too big , I told them that thought will go away in 3 months. And I was always right . Enjoy your shop , it was in the making for a long time .
I definitely with it was 50x100!
Doors coming Tuesday
@@MotoCheez next for the hot season your engineer skills with come into play , a high volume fan in the right spot will do wonders ,and with the doors you will have options.we’ll be watching for the next video….51 degrees yesterday , today it’s at 30 with stiff breeze upstate NY . It won’t be long , good weather is coming……
@mikeizzano172 I did order a 9000 cubic feet per minute floor fan last night through Amazon, eventually I have a mobile home air conditioner unit I will be putting in but after I get roof insulated.
I hear the weather's been decent up north by the time I get up there It should be good!
Congratulations on the lift.
Thank you
Now Moto, you know, you can't fire momma Moto, she's the boss😊
Can never fire my mom! 74 and still working hard
@@MotoCheez very true Moto very true.. My mom's gonna be 88 this year
@vharrald my dad's going to be 88 too
@@MotoCheez sadly my dad passed away in 09... From metastatic liver cancer
@vharrald aww. Sorry
Ya know? Mini's gonna be pissed when she learns she's not where she can be to get lifted for a belly-rub. Good lookin' lift, every man's envy for maintenance work.
She definitely will be!
Florida suits you. 👍 I see that company has tire machines/balancers too.
Frikkin awesome... When I need to get under my Truck I am coming to see you...!!!
👍😁😁
Cheese, should have called me, I anchor machines every day! I am in the area of you.
I didn't know that!
Cheezyspeedshop! Grans putting in work!
😂😅👍🧀
Thanks that’s a great price too 😊
Congratulations Cheezy :D
Thank you!
Nice,
Be well be safe!
After a month of use, readjust the safety lock cable. Mine started only releasing one side when you dropped the lift, scary first time it did it.
Good idea, yes they said even check the balance and cables too And the bolts to the floor
Yup
Nice lift .great content
Thanks!
So when are Mini and the Fiero going to get some of that Florida sunshine?!
Probably someday but no plans yet
Very nice shop. Next, you need a motocycle work lift. Any viewers in the area of Cheez got a motocycle lift to donate? 😊 You Mom is still in great health and active. That is great! I just got rid of a 5hp 2 stage air compressor with 80 gallon take like a year ago. I would gave it you for the shop. I stumble across stuff like that and get them for free and pass them along to someone who can use it. I will keep my eyes open for anything you could use. You are only 2.5 hours away. Daytrip.
Yes I will definitely need a motorcycle lift, or make something that will work on the arms of this lift. Aw, my compressor that my parents found used at a tag sale it's crapping out and I cannot find any rebuilt parts for it so that would have worked Been awesome. I am in need of a compressor.....
@MotoCheez I will keep an eye out for another one. That one had a stand alone dryer too. Make a small pad behind the shop enclose it and insulate it for sound
@DaVilla1126 I thought about putting it outside, I think I may end up putting it under the lean-to I'm putting off the back of the shop later on. I do not use air tools much anymore but I definitely need it for my plasma cutter
Great video!
Thanks 👍🏻
Yup you’ll be an expert when it’s done😂🤣
EXACTLY
game changer for you
Absolutely
Get out of Moms way,, she's trying to get that thing done before dark😅😅😅😅
Haha. Yeah, my mom don't play around
GR8 job Sir 😊
That’s what she said 😊
NOW YOUR COOKIN WITH GAS,,, YAYYYYYYYYYYYY
Yeszzzzzzz
You can make a bike or motorcycle attachment for it.. 😂
That's exactly what I was thinking to do!
Tell Mom that she's going to have to put her phone in a basket and no talking back.
🤣🤣😂 she was recording me
I bought this same lift (red) on Temu, I put in the cart at the site for $2300 and a week later they added a $700 rebate free shipping to my driveway in 7 days. I hope is a good one
Let me know how you make out
Centering on lift, pull up till drivers seat is centered on lift post.
Is that a general rule for all vehicles? Sounds logical
Pretty much
@alk5749 good gauge to go by...
You put the arms on backwards. The arms should be able to fold overlapped towards the garage doors. It makes it alot easier to place them under the vehicle.
Longer arms go towards back of vehicle. If you push the forward they fold in each other
Are you going to open up Cheezy's Quick Lube service?
No... Wait... Maybe just for the wimmen's 🤣
Nice job. How about a 10 minute review on those new Milwaukee tools. My Dewalt are wearing out. Thinking about switching brands.
When I was upgrading my old Craftsman set of tools that were nicad and I wanted to go to lithium I heavily research between DeWalt and Milwaukee, I chose Milwaukee because I like the quality build internally with more ball bearings instead of oil light bearings like DeWalt uses. I did this about 6 years ago and I am very happy that I chose Milwaukee. DeWalt does make a great tool but I do think Milwaukee is better. I actually have some Milwaukee reviews years ago. One was their chainsaw
Thanks for the information. I think I will upgrade.@@MotoCheez
I’m actually assembling the same lift myself how many pulleys is there supposed to be on the bottom of the lift ram cause im either missing one or 3 pulleys depending on how many there should be? I would definitely appreciate any information
One pulley each side if top bar style
congratulations!⛩
Thank you
Dang Ceeze,your doing a Michael Jackson song on your floor,just beat it.
Was there any extra pieces.
🤣😂
Are those A Semetric arms to be in the front of the vehical or back
Back, like I installed
I have the same lift, all the info i read says the arms shall point to the rear of vehical for driving in, that puts the asymetrical arms to front of lift. yet the ifo says shortest arms to front, mine asymetric arms are the heavery built verses the straight ones, and are the longest ones all the info shows them to the front, very counterDicting information, Sence wants to tell me the heavyer duty arms should be to the front the ones with the offset mounts, but they are the longest and have the 2 sliding adjust, confusing
All I see, as I understand, the asymmetrical arms should be on the rear because they have the 2 extensions and they are more heavy duty, where the front arms have one extension so they cannot be brought out as far. Plus I went by the photos.
@@MotoCheez ruclips.net/video/7O3f92w4V_M/видео.html
Are those arms symmetric or asymmetric?
The rear arms are longer than the front
👍👍👍👍👍👍👍👍
did your lift come with 3 rubber orings if so where did u install them at thanks.
I don't recall any o-rings coming with the lift. How big are they?
@@MotoCheez same size as the ones on the hydraulic lines not sure if they set extras or if they go somewhere
@codydornon8791 hmm. Just had the ones in my video. One to each cylinder and to the pump
@codydornon8791 the rubber o-rings were extra I believe, i had one.
@@MotoCheez so u just put pipe tape on the fittings that went in the cylinders
Lol😂