Trucks is a mechanical masterpiece But him as a father really shows he has his priorities in check. The happiness of his daughter shows this man really is one hell of a cool guy. Keep flying, keep sailing those dunes of gold brother.
Really nice truck, i love the subtle factory looking touches it has going on. He should color match the Line X bed sides, just like they did on the bumper/ roll pan. It would look much better and still serve its purpose.
I think the Line-X looks good. I had it done on my fenders too, but I have the Line-X following the wheel well all the way around, and painted over with the factory paint color. Gets the job done but looks more subtle.
The tuner did such a fantastic job on the start up. Factory cold start settings have something like 17% fuel addage. That cold start was just perfect. The fact hes running a pretty aggressive cam means it doesnt make a whole lotta vacuum so for it to start that smooth tells me that tuner looks and adjusts EVERY single table and dials mapping in the way youre supposed to. Id bet my bottom dollar HP tuners is where he learned his procedures, theyre the best in the biz. Id really like to know the cam specs if anyone is privy to that information. That thing just sounds so stout and right. I wanna dip my BAWLS IN IT!!!!!!!!!
I would say color match the linex on the sides. Bad ass truck. That truck is a lot like mine. I have a 07 Sierra crew cab, with mazzulla LT front. Mazzulla Hanger’s and shackles and u182 deavers. Just bought some C85s and those u182s will be up for sale. I can’t keep a rack in mine though. I blow it out a average of 2 times a year. Bought a lifetime warranty so 30 mins and it’s changed out
Nick Gudino I am, the C85s are on back order. I already paid for them and I talked to deaver and they said they are hopefully going to have them in stock by the beginning of March. Once I get them I’ll take the u182s off and they will officially be for sale. I live in SoCal
Nick Gudino right, I live in the 909. I want $800 for them. They are over $1200 after taxes new. If you are really interested at that price we can figure out how to get in contact
It would be great if you could include cost in the review. For instance I'm looking at geting an rpg rst 18 and bolt kit. What could I get built by a smaller shop for the same cost?
Got a Dirt king race kit for 9,300 front only 3.0 bypasses 2.5 coil overs,upper and lower arms,spindles,tie rods and all hardware. My rear set up is still in the air might go with a 4link set up runs around 9,500. Shop time and labor may vary.
Great truck! Regarding that issue about stalling at stop lights because of the brake booster, I had a very similar issue and had it re-tuned. The issue went away but it took someone else to retune it. Not sure if this helps (experience from G8GT with almost 500 tire)
I caught this video and thought I’d like to start building something since I’m getting rid of my 2011 Raptor, then I start looking up the parts and definitely can’t afford to play with these dudes!
@@stevengomez8304 It definitely wasn’t a waste, it’s a badass truck but it’s very limited when compared to these monsters. I had all four wheels off and it jumped great, you just have to go slower than prerunners and be smart about how you place the truck.
Hello sir, I have a 4.8 silverado with a stock transmission & I was wondering about your TH400. A video on what options we’re put on that build would be great. It sounds like you paired it with a couple of engines but more importantly that 4.8 🤤. I know there are stages but my questions really fall on shifter set up & anything you wanna share that would help, help!
👍🏿on the line-x think would look better if it was done all they way around the truck at the belt line.like a two tone paint job?? Awesome truck either way!!!!
I want to start a ranger project but I have no idea how to do it. If someone can give me some info oh where I should even start. I’m 17 and graduating high school this year. Thanks
Beautiful trucks, Hey guys I'm in a predicament. I have a 07 classic Silverado with 5.3 and I just did long tube headers with cat delete y pipe. The smell so bad so thinking of going to shorty headers and put stock y pipe with cats back on it. Anyone have any ideas on a y pipe I could run with long tubes that won't drain the bank. They are speed engineering headers with 3" collector.
@@jss6060 It is actually dual out the rear, Even sitting there at a light it's like holy crap that is strong. It's turned so we have it running clean it's not rich in mixture.
Ride Red maybe try a high flow cat. It will still give you the performance you’re after but will help burn everything off that’s making it out the back
@@jss6060 Awesome, I was trying to look around and see if there was a high flow y pipe for it. I will look some more. Thanks for the advice I appreciate it. 👍
If you trim the front up a little to contour the flare it would look better. I didnt like it....sticks out too much. Or....color match the spray to paint so it blends in better.
Where can I get one of those cool ass Terra crew stickers and shirt do you guys have like a place I can buy stuff??? put money in your pockets, rule one of a kick ass you tube channels, set up merchandise site!!! And advertise at end of video!!!
Trucks is a mechanical masterpiece
But him as a father really shows he has his priorities in check. The happiness of his daughter shows this man really is one hell of a cool guy. Keep flying, keep sailing those dunes of gold brother.
Really nice truck, i love the subtle factory looking touches it has going on. He should color match the Line X bed sides, just like they did on the bumper/ roll pan. It would look much better and still serve its purpose.
I think the Line-X looks good. I had it done on my fenders too, but I have the Line-X following the wheel well all the way around, and painted over with the factory paint color. Gets the job done but looks more subtle.
The tuner did such a fantastic job on the start up. Factory cold start settings have something like 17% fuel addage. That cold start was just perfect. The fact hes running a pretty aggressive cam means it doesnt make a whole lotta vacuum so for it to start that smooth tells me that tuner looks and adjusts EVERY single table and dials mapping in the way youre supposed to. Id bet my bottom dollar HP tuners is where he learned his procedures, theyre the best in the biz. Id really like to know the cam specs if anyone is privy to that information. That thing just sounds so stout and right. I wanna dip my BAWLS IN IT!!!!!!!!!
How are the front tires sticking out on prerunners to make them look wider? Is it spacers, the offset in the rim or is it the suspension set up?
Bigger and taller spindles and upper and lower arms give the wide look.
Wing world has that same line X on there bed sides.
I was thinking the same.
David Alvarez Wings World did a walk around video on this truck to.
The black hat clip at the end was hilarious.
Bad ass build.Thanks for sharing. 🏁
He keeps that truck clean as hell wasnt dirt anywhere 😂
Deeshotta 707 prolly cause he doesn’t have a roll cage yet so he ain’t gettin it to dirty yet
Is that a MAC tools truck in the background? I'm thinking about a career change....
I love these videos, dude. The format you have sets such a cool organic vibe. Keep it going!
I would say color match the linex on the sides. Bad ass truck. That truck is a lot like mine. I have a 07 Sierra crew cab, with mazzulla LT front. Mazzulla Hanger’s and shackles and u182 deavers. Just bought some C85s and those u182s will be up for sale. I can’t keep a rack in mine though. I blow it out a average of 2 times a year. Bought a lifetime warranty so 30 mins and it’s changed out
If you’re really selling the u182s I’m interested! 😬
Nick Gudino I am, the C85s are on back order. I already paid for them and I talked to deaver and they said they are hopefully going to have them in stock by the beginning of March. Once I get them I’ll take the u182s off and they will officially be for sale. I live in SoCal
Js S Awesome! I’m in Buena Park. Just don’t know how to get in touch without putting my info on RUclips
Nick Gudino right, I live in the 909. I want $800 for them. They are over $1200 after taxes new. If you are really interested at that price we can figure out how to get in contact
Js S Yeah $800 sounds great. How old are they?
It would be great if you could include cost in the review. For instance I'm looking at geting an rpg rst 18 and bolt kit. What could I get built by a smaller shop for the same cost?
Got a Dirt king race kit for 9,300 front only 3.0 bypasses 2.5 coil overs,upper and lower arms,spindles,tie rods and all hardware. My rear set up is still in the air might go with a 4link set up runs around 9,500. Shop time and labor may vary.
Does anyone have video of that 2011 Suburban with this setup on it running around SD?
Another killer video,,,love the way you really get the Build info on all the trucks
Great truck! Regarding that issue about stalling at stop lights because of the brake booster, I had a very similar issue and had it re-tuned. The issue went away but it took someone else to retune it. Not sure if this helps (experience from G8GT with almost 500 tire)
Super-Duper-Fresh Truck "Awsome".
I caught this video and thought I’d like to start building something since I’m getting rid of my 2011 Raptor, then I start looking up the parts and definitely can’t afford to play with these dudes!
If only u can get the money back u waisted on the raptor
lol raptor.... better off with a i-beam ranger budget build if you wanna send it.
@@stevengomez8304 It definitely wasn’t a waste, it’s a badass truck but it’s very limited when compared to these monsters. I had all four wheels off and it jumped great, you just have to go slower than prerunners and be smart about how you place the truck.
5:26 stock rack ?
Line X looks great 👍
what fiberglass does the truck have?
6:33 That awkward moment.
Hello sir, I have a 4.8 silverado with a stock transmission & I was wondering about your TH400. A video on what options we’re put on that build would be great. It sounds like you paired it with a couple of engines but more importantly that 4.8 🤤. I know there are stages but my questions really fall on shifter set up & anything you wanna share that would help, help!
The ending kills me every time 🤣 keep up the good work my dudes👍
Will Mazulla ever bring back their long travel kit? Dirt kings looks cool and might be my only options but the Mazulla just looks more tough.
Why were you so suprised about the steering rack? What’s supposed to happen?
Is leaf that bad compared to links?
Awesome build! Truck goals right there.
How much would one I’d these Bulls cost?
What company is that third light break from !?
How do you keep the clan doors from rattling?
Just subscribed. Can’t wait to watch
Ur gonna love it
👍🏿on the line-x think would look better if it was done all they way around the truck at the belt line.like a two tone paint job?? Awesome truck either way!!!!
Sick truck, You could always just do a color matched protective film. You won’t be able to tell it had it unless your up close.
Videos are getting better and better!! Kickass truck build too, love it.
Love the endings..... Too funny
Bringing it with the sick ones!
So what do these California guys do for work? Rent and goods are astronomically high yet can afford these insanely expensive custom machines.
I damn near cried watching this !! Such a clean build !!!
I love the black hat endings lol
Bro this is a clean ass bulid
Good job bruhaa
I would get some rhino liner made up the same color of the truck and have it sprayed on in place of that black liner.
Masons truck is amazing...
I want to start a ranger project but I have no idea how to do it. If someone can give me some info oh where I should even start. I’m 17 and graduating high school this year. Thanks
Look up Dezertrangers forum
Dude. Just do it.
I know this is a bunch of months late but those methods are m101s which I love
Trying to build up my Overlanding 02' Tundra, then I Watched this Vid...😲....☹😄!
Staying MY Lane🤘🏽
Beautiful trucks, Hey guys I'm in a predicament. I have a 07 classic Silverado with 5.3 and I just did long tube headers with cat delete y pipe. The smell so bad so thinking of going to shorty headers and put stock y pipe with cats back on it. Anyone have any ideas on a y pipe I could run with long tubes that won't drain the bank. They are speed engineering headers with 3" collector.
Is it dumped under the truck? Mine was and I popped it out of the side and it helped a lot
@@jss6060 It is actually dual out the rear, Even sitting there at a light it's like holy crap that is strong. It's turned so we have it running clean it's not rich in mixture.
Ride Red maybe try a high flow cat. It will still give you the performance you’re after but will help burn everything off that’s making it out the back
Ride Red I’ve used magnaflow high flow cats and they worked well
@@jss6060 Awesome, I was trying to look around and see if there was a high flow y pipe for it. I will look some more. Thanks for the advice I appreciate it. 👍
Do you need a bead lock?
all $hi! talkin aside that truck is sweeet
😂 the ending 🤦🏻♂️😂
Hopefully you guys can do one of these on my 08 HD2500 as soon as its done
Livin the dream
Forget the LINE-X...Use MONSTALINER as it's the same type of product, but comes in COLORS, including your gold color
Now it’s caged it looks even more rad!
They put a sort of like bedliner like paint on atleast I’ve seen it on a 18 z71 from the factory but that would be nice
I love it 😂😂🤘🏽
I wouldn't do that. We did a full body paint protection film on raptor not to long ago. For the same reason.
How many mpg
Dude, super dude. Dude super. Super dude. Super dude. Dude super.
If you trim the front up a little to contour the flare it would look better. I didnt like it....sticks out too much. Or....color match the spray to paint so it blends in better.
I see he must be a Matco dealer!!!
How do yall not have more subs
Samuel Jones I know.
these driveway videos are killer
Arshia ❤️MOMMA MIA❤️
Where can I get one of those cool ass Terra crew stickers and shirt do you guys have like a place I can buy stuff??? put money in your pockets, rule one of a kick ass you tube channels, set up merchandise site!!! And advertise at end of video!!!
El mejor canal del universo. Impecable este carro
awesome truck !
Another great show!!
2w?
Need a hydrobooster ditch the vacuum booster
Yeah dude, dude , yo dude, dude, no way dude, dude, dude.
You hit me up on some real!!! Thanks bro keep up the good vids!!!
my ocd is killin me cause that fan wiring!$##@!
TERRA CREW FOR LIFE🤟🤟🤟 REPPING FROM MASSACHUSETTS
Great video
14:45= GOT ME FUCNKER🦅
LineX the entire thing...I’d worry more about the blue bead locks.....awesome rig!
Can't lie, i dig the line x bedside 🤷♂️
With a good calibrator/tuner that should be streetable
Its a pretty street legal prerunner doesnt even have a cage
yall not know you can color match the line x
I see a witch 😬
Nice!
Up next let's take a look around the white top black leggings rig.
I’ll second that 😁
color matched linex would be better but its functional so who cares
You guys showed be huge by now, what happened?
bitchen truck. Morgan is a bad ass fab guy.
💯
The line x is pretty cool....if they do it right it would look sweet on the whole truck like a two tone Paint job
bed decals? shittts weaaak
dude those things are for the if you know you know
Color match the line x
😍
PPF > Line X
S-D..!!!
I’ve been waiting to line x the body of my Excursion to save the body from the trail.
retread
Comment
It looks stupid, you should of just put clear bra wrap on it. That’s what my jeep has. I just redo it once a year
George Fales bet his truck is way nicer than your Jeep lol
Good thing I don’t live in California
I’ll take a raptor lol