I did enjoy this, very much so. Thanks! I have the TA-20. Came here when searching the EC21-2F51 error. Looks like I may need another print head. I like that they now have refillable ink for the large format. I can only imagine the money I will save on one of these.
have you tried any inkjet banner material, sticker papers and card stock? what is max mm, or gsm or mil thickness this machine can handle and will generic inkjets work or cause head issues
Hi Sir , this the info I got from official website Media Width Roll paper : 297mm - 610mm Cut sheet: 210mm - 297mm Media Thickness Roll/Cut : 0.08mm - 0.28mm Minimum Printable Length Roll/Cut : 203.2mm Maximum Printable Length Roll paper : 4m Cut sheet : 432mm Maximum Media Roll Diameter 110mm
3:00 Since the pattern of the ink inlet for each color is different, if you use a genuine ink bottle, you don't have to be afraid of plugging in ink that doesn't match the color.
Link to 3rd party compatible ink refills? Seems they ditched cartridges just to replace it with a refill bottle that has a proprietary bottle top connection. I tried some listed as being compatible with GI-20 but the nozzle wouldn't connect properly to refill. Can't find any listed as compatible with TC-20 and official TC-20 refills from Canon are as much a rip off as cartridges.
Hi Mr Ben, yes I agreed with your statement, they ditched cartridges just to replace it with a refill bottle. I never tried 3rd party compatible ink for Tc20 before, as original not that expensive in my country , GI20 is for G2000 / G3000 series, not the right model for TC20.Canon might void warranty if they founded 3rd party ink in tube. TC20 are using PFI-050 ink.
selamat sejahtera kawan, model ni tidak galak untuk buat photo printing, jika nak foto printing pun boleh juga, cuma kena pakai kertas glossy, masa printing tu agak 5-10 mins tergantung kepada saiz dia
For poster printing I suggest to have 12 colours model , this is 4 colours model for CAD drawing is fine , for poster I don’t think so we could achieve the good quality
Hello Can you guide me detail how to load roll paper? I bought same printer tc20 but I cannot use roll paper. The paper cannot spin around to print :( How many meter roll U use?
Hi there, please check below : 1. Make sure that is 50m A1 2” core roll paper 2.make sure you have locked the paper as I show in the video 3.push the paper to the edge until you hear the sound of beep 4. Close all the cover when loading paper , tc20 unlike the old model, you may open top cover while loading paper … but tc20 have to close all the cover while loading paper
Thanks for your comment, sure I did every step as instructions. Roll paper I use is 24 inch ( 60cm), locked both, closed the lid. But it cannot spin around cuz roll paper is heavy ( I use 30m )
@@dennisthefatkid nah, I know TM and tried on TC but doesn't work. It seems a lot of TC system is different than IPF, TM, TA, TX, TZ or even GP series. Do you have the service manual?
Hmmm… hard to judge , in my personal opinion even the ink for TC20 is cheap my the ML is low. For TM5200 the ink is expensive but the ML is large, the best answer is to tracking the cost with “status monitor” it’s free from Canon
@@hugotejero3907 I can’t give an exact answer of this question as this model still very new in market. Generally some client can last 1 year or 2 years for one print head
Hi Hardeep, yes you can … but in manual way, you have to flip manually after the first print . I not suggest to do it so.. cause I afraid the first side is not dry yet
Nice, i use it for printing wrapping paper, using Roll paper 80gsm
😎
I did enjoy this, very much so. Thanks! I have the TA-20. Came here when searching the EC21-2F51 error. Looks like I may need another print head. I like that they now have refillable ink for the large format. I can only imagine the money I will save on one of these.
Thank you ☺️
1:52 When mounting roll paper on TC-20 equipment, I think you forgot to plug the cradle on both sides of the branch pipe and lock the blue switch?
It subject to paper core sir
I need to print A1 architectural plans, do you recommend it?
For architectural plans , 5 colours models will do, TM5200, TC20, TA5200
Do you keep your printer on all the time?
Hi there , yes I do … it will turn into sleep mode itself when no printing job
Hello, how to set printer’s setting to print monochromatic using blue ink only?
I think the settings could be founded in software “mono printing” , beside black , I have no idea what ink will be consumed
have you tried any inkjet banner material, sticker papers and card stock? what is max mm, or gsm or mil thickness this machine can handle and will generic inkjets work or cause head issues
Hi Sir , this the info I got from official website
Media Width
Roll paper : 297mm - 610mm
Cut sheet: 210mm - 297mm
Media Thickness
Roll/Cut : 0.08mm - 0.28mm
Minimum Printable Length
Roll/Cut : 203.2mm
Maximum Printable Length
Roll paper : 4m
Cut sheet : 432mm
Maximum Media Roll Diameter
110mm
3:00 Since the pattern of the ink inlet for each color is different, if you use a genuine ink bottle, you don't have to be afraid of plugging in ink that doesn't match the color.
yes sir
Yes you are right sir 👍🏻
Hey ! Does it print on glossy paper? Thanks
Yes it can
@@dennisthefatkid ok ! Tnks
so canon doesnt use chips for the ink anymore? in this printer?
Hi there, I don’t see any chipset in cartridges
Link to 3rd party compatible ink refills? Seems they ditched cartridges just to replace it with a refill bottle that has a proprietary bottle top connection. I tried some listed as being compatible with GI-20 but the nozzle wouldn't connect properly to refill. Can't find any listed as compatible with TC-20 and official TC-20 refills from Canon are as much a rip off as cartridges.
Hi Mr Ben, yes I agreed with your statement, they ditched cartridges just to replace it with a refill bottle. I never tried 3rd party compatible ink for Tc20 before, as original not that expensive in my country , GI20 is for G2000 / G3000 series, not the right model for TC20.Canon might void warranty if they founded 3rd party ink in tube. TC20 are using PFI-050 ink.
@@dennisthefatkid Is there a compatible maintenance box? Or chip reset? Thanks
@@dennisthefatkid Is there a compatible maintenance box? Or chip reset? Thanks
Can we use sublimation ink also..??
This printer installed pigment ink, can't use sublimation ink, if you want to try sublimation ink, you can try Epson F570 series,
How do you change the printing resolution? Is set on 600dpi on high and 300dpi on draft.. help!
under the printing preference that's three option allowed you to choose , draft / normal / high
can you put sublimation ink in this printer?
PLease can you print some photo whit glossy paper please
Yes you can … please stay tune, I will upload another episode for paper loading & paper type support
om coba dong videoin ngeprint foto, lama ga, bagus ga
selamat sejahtera kawan, model ni tidak galak untuk buat photo printing, jika nak foto printing pun boleh juga, cuma kena pakai kertas glossy, masa printing tu agak 5-10 mins tergantung kepada saiz dia
How's the image quality to print for art posters
For poster printing I suggest to have 12 colours model , this is 4 colours model for CAD drawing is fine , for poster I don’t think so we could achieve the good quality
Thanks bro.
Hello
Can you guide me detail how to load roll paper? I bought same printer tc20 but I cannot use roll paper. The paper cannot spin around to print :(
How many meter roll U use?
Hi there, please check below :
1. Make sure that is 50m A1 2” core roll paper
2.make sure you have locked the paper as I show in the video
3.push the paper to the edge until you hear the sound of beep
4. Close all the cover when loading paper , tc20 unlike the old model, you may open top cover while loading paper … but tc20 have to close all the cover while loading paper
Thanks for your comment, sure I did every step as instructions. Roll paper I use is 24 inch ( 60cm), locked both, closed the lid. But it cannot spin around cuz roll paper is heavy ( I use 30m )
Can I used for sublimation?
Don’t think so.. it not design for T-shirt printing
no
@@dennisthefatkid is working fine
@gustavobaeza3890 did you buy one and converted it to see if sublimation works?
@bernardbagayan8935 I sold it. It was working fine. For the 3 weeks it was withme.i couldn't tell you how is doing now.
Do you know how to enter the service mode?
I never tried before , but I believe the method to entering service mode is equal to TM300/5200 (try google it)
@@dennisthefatkid nah, I know TM and tried on TC but doesn't work.
It seems a lot of TC system is different than IPF, TM, TA, TX, TZ or even GP series.
Do you have the service manual?
@@zeozeto5457 Hey ! You did it ?
@@nutrysuplementos260 did what?
@@zeozeto5457 Entering Service Mode on the Canon TC-20
hello, can we change it to an eco-solvent printer, please?
Sorry sir , I don’t know how to modify the system to eco-solvent.
Does tc 20 is econo wise saver for commercial business especially for architectural and engineering plans?
Hmmm… hard to judge , in my personal opinion even the ink for TC20 is cheap my the ML is low. For TM5200 the ink is expensive but the ML is large, the best answer is to tracking the cost with “status monitor” it’s free from Canon
I'm a graphic designer, do you recommend?
Hi Artsy, I suggest to have pro series for vibrant colour output
The red text at the bottom of the screen is hard to read, even if I pause the video. I'm still not sure what it said.
Please stay tune for my next episode , I will upload a video soon for paper loading tutorial
¿qué tiempo de vida tiene el cabezal o el equipo en general?
@@hugotejero3907 I can’t give an exact answer of this question as this model still very new in market. Generally some client can last 1 year or 2 years for one print head
Can a printer print on both sides of the A1or A2 paper size?
Hi Hardeep, yes you can … but in manual way, you have to flip manually after the first print . I not suggest to do it so.. cause I afraid the first side is not dry yet