John Deere 1640 Hi/Lo Part 1 Stripping and Inspecting

Поделиться
HTML-код
  • Опубликовано: 24 янв 2025

Комментарии • 25

  • @Paul3419
    @Paul3419 5 лет назад +2

    hi, i'm from germany and had a problem with the power shift on my 2250. Your videos helped me a lot. Thanks for that. I'm looking forward to more videos. :D

  • @garethdavies3220
    @garethdavies3220 5 лет назад +1

    Hi Lance, enjoying this series, really like the way you explain, demystify and take the fear out of dismantling something alien to some of us. Good stuff, take care. Gareth.

    • @BundyBearsShed
      @BundyBearsShed  5 лет назад

      Thanks Gareth, Hopefully it will encourage others to have a go at their own tractor repairs.

  • @runningman4459
    @runningman4459 7 месяцев назад +1

    I always thought the restricted pipe was the lub pipe to limit the amount of oil lost to the lub side.

    • @BundyBearsShed
      @BundyBearsShed  7 месяцев назад

      They bought out a pto restriction at one stage as well. there are a few upgrade kits for these old tractors. Without watching it it is that long ago now I cant recall what I said.

  • @frankandersstuen1464
    @frankandersstuen1464 2 месяца назад +1

    hi sir. hope you can give me some idea on where my problem could be. it is a 3040 sg2, it has some hydraulic problems. everything (hi/lo works great,) is "ok" until it gets up to operating temp. then the hydraulic starts shaking (loose power steering) and the main pump is starving of oil (can hear knocking from the pump) the oil and ALL filters are new.

    • @BundyBearsShed
      @BundyBearsShed  2 месяца назад

      If it still does it whith the hi/lo in low i would reseal the lift cover, with it leaking the front pump cant build up enough oil th shut down.

  • @devinfletcher2643
    @devinfletcher2643 5 лет назад +2

    Thank you Lance for showing the Hi/Lo!!!! Enjoying this series. Will you be covering the Brakes as well? I have heard the linings can come off those as well and cause a lot of headache.

    • @BundyBearsShed
      @BundyBearsShed  5 лет назад

      G day Devin, Not planning on the brakes yet as there is no sign of lining in the suction screen but that does not mean after a bit of use they wont come off. I will get it going and work it and see.

  • @grskowronek7931
    @grskowronek7931 2 года назад +1

    Good morning
    I am a farmer from Poland. I am in the process of renovating the hi-lo system in my John Deere 2250. I have a question about how to install the sealant L62272 and L62161 (they are made of plastic) and how they should be arranged during assembly. What system to do it? please reply. Have a nice day

    • @BundyBearsShed
      @BundyBearsShed  2 года назад

      The lip goes to the oil and I grease them up well and help them into place with a slightly blunt O Ring pick and work it around.

    • @grskowronek7931
      @grskowronek7931 2 года назад

      @@BundyBearsShed Thank you very much. I managed to do it

  • @ozlakota1
    @ozlakota1 3 года назад

    what a great fairdinkum reveiw thank u

  • @Lorand24
    @Lorand24 Год назад +1

    Hi there, somethimes when engaging Hi on my 2140 4x4 its like pushing the engaging lever against a wall, othertime shifts easily. What could be wrong there? Thank you for your answer.

    • @BundyBearsShed
      @BundyBearsShed  Год назад

      Possibly not enough oil pressure as it needs pressure to hold it in place with the small detents if you are talking about the Hi/lo on the dash. If it is Hi on the gear lever I would remove the shift cover for a look.

    • @Lorand24
      @Lorand24 Год назад

      @@BundyBearsShed thank you! Yes, I'm talking about engaging lever. What it takes to reach the cap, what i need to remove to see?

    • @Lorand24
      @Lorand24 Год назад +1

      When it engages he stays there no problem. And he don't do this all the time..

  • @johnambler3107
    @johnambler3107 5 лет назад +1

    G Day Lance do you have the part number for the special tool wooden block 😊👍👍 I’m catching up slowly

    • @BundyBearsShed
      @BundyBearsShed  5 лет назад

      I find each country has its own part number for that bit of tooling.

  • @danjelmrruku99
    @danjelmrruku99 4 года назад

    Hello im from Albani and i have problem whit hydraulic and problem with the steering system thanx im waiting for help

  • @KaczorekKaczzorekkk
    @KaczorekKaczzorekkk Год назад +1

    Nie znam angielskiego ale i tak dużo z tego wiem