Absolutely awesome video, these workings must be huge, when I saw “Part 1” and 24:00 minutes long I was floored! Fantastic artifacts and it’s fantastic that the mine is still pristine after all of this time. Definitely interesting geology as well. I’m looking forward to Part 2, lots of ladders! Thanks for sharing Frank, fantastic exploration, stay safe.
Glad you enjoyed it, Dan! I don't think I've ever uploaded a video longer than 20 minutes. I try to avoid that if I can. However, there was just too much good footage in this one. I edited it down as much as I could and still had 24 minutes of footage. That's why there'll be a Part 2 and a Part 3 and probably a Part 4!
When you’ve done this for 13 years like I have, it’s really not that big of a deal. I remember when I first started out, though, I was always too scared to go into the mines. I would only film them from the entrance and that would be it. Some of those videos are still on my RUclips channel, I think.
It is amazing how well-preserved the desert climate makes these mines. When I saw that sheave wheel still in position at the top of that headframe, I knew the mine was something special.
@@AbandonedMines11 The lubrication was quite possibly sheep's tallow. It was used for several decades by the railroads of the era, so would have been available commercially.
Can't wait to watch. This is easily one of my absolute favorite youtube channels. Thanks for enduring these treks to bring us these easily lost bits of our history.
Sometimes I research an abandoned mine after I already went to it and filmed it. That’s when I tend to find out answers to questions I had while I was in there filming. I probably should do all the research first before heading out, but sometimes that just isn’t the case. For some abandoned mines, I go to them spur of the moment while I’m cruising down the highway.
Wow that cable grav tram for ore carts was so cool, returning the empty car with the heavy loaded one! Thanks for going into these places (and staying safe while exploring) to bring a glimpse into the past of mining onto RUclips.
Glad you enjoyed it! The caretaker guy is the one who explained the gravity tram to me, so I'm assuming that he is correct. Thanks for checking out the video, man. I appreciate it!
I have noticed that almost all old mines have those pink or orange spray markings on the side walls. Who did these and when? Was there a massive survey of all old mines in the 70s or 80s or whenever florescent paint first came out?
Those are surveyors’ marks. They were probably put there when a company was considering re-opening the mine. I guess some of the survey marks indicate where they notice deposits of ore that could be mined at a later date. I’m sure the marks also mean other things, but I don’t have any idea what those might be. It’s hard to say how old the survey marks are. Because they are made out of spray paint, I would guess probably not older than the 1980s like you suggested. Thanks for your comment and question!
Frank , I've really enjoyed your last few video and this video of the Loomis mine is awesome . Can't believe how old this mine is and very well preserved
Glad you enjoying these last few videos. They've been of some pretty big mines, which is a nice change. I appreciate your ongoing interest here, man. Thanks!
In that "engine" room, that's all one machine, "exploded" into a million bits. The ring gear fits on the floor side of that U frame with the gear on the side, and in that U frame sat the drum. The little Y cup, that's a speed selector for the ring gear based on the drum's rotation, i'm going to guess this, those parts were up top, where the wheel chamber is. Someone took them apart and moved them in preparation to remove them from the mine. Won't comment on when, but that's my 2 cents. The way i see this mine, at least in its current rendition, the cheap rail, the wooden branch crossties/sleepers, that wheel atop (that's not a structurally sound design for something like an ore cart, it looks to me like it was salvaged from a horizontal application) ... this mine was run on the cheap.Like they didn't want to stack too much money inside it.
Thanks again for another informative comment. I should've realized I was in the hoist room when I was there. I assumed that the hoist would've been in that chamber behind and above the sheave wheel. I also should've gone up there to check out that upper area where the sheave wheel was, but didn't. I appreciate the information in your comments!
When you made the post for this mine, I was looking forward to it. I find it awesome and inspiring that someone has been looking after the mine to try to keep it from being vandalized. Indeed, the condition of the artifacts has made this quite the find. Thanks for sharing it with us! Looking forward to pt 2!
Thanks for your comment! Yes, it's cool that Roger keeps his eye on the place -- on the entire mountain, in fact! Cool dude! Part 2 will be available for viewing this Thursday. In it, I explore the three lower levels.
This is actually really interesting. Things really have changed since I was a kid cracking open big rocks. Seeing how mines run and having your text explanations edited in helped me understand how everything kinda worked. Would love to take a walk through these old ruins! Amazing video! I've been calm and relaxed this entire time. I'll watch the other parts soon :)
Thank you, Seth, for your comment! I appreciate the feedback. Glad you enjoyed the video and got something out of it. Hope to see more of your thoughtful comments on future videos! Thanks again!
The room at 10:30 was the hoist room. The motor and winch would have been in there with the cable up and over the sheave wheel and down the incline. The little pass throu was the hoist operations window to see the skip car coming up. Very very cool mine. Stay safe out there.
Thanks for clarifying that, Lee! When I was there, I wasn't able to figure that out for some reason. Keep in mind that I just finished a grueling hike up the mountain to reach the mine, so half the time I think I'm bordering on exhaustion. But it all makes sense now. I should've gone up that little sloped passageway in the hoist room to see what was up there. That would've taken me right to that sheave wheel, I'm sure. I can totally see how that pass-through was the window for the hoist operator to see the skip car coming up. I should've realized that then. Thanks again for the great comment and information!
@@AbandonedMines11 not a problem man. Carry some extra water with ya, never know what could happen. Been subscribed and watchin your channel for a while and have never been disappointed. Hopefully one day we can get together for some explorin. If your ever in South Dakota let me know.
No joke, sometimes the hike to the mine is the hardest part. I damn near died climbing 3000 in 3 miles a few weeks ago. Just to find the portal was collapsed. I was too tired to look around for another way in. I'll have to go back next year and find an easier way up
You’re right - sometimes the hike is the hardest part! Sorry to hear you found a collapsed portal after making such a long hike. That happens sometimes. I haven’t looked at your RUclips channel yet, but are you big on exploring abandoned mines?
That's why I inserted that piece of footage where I was walking through the tunnel for about 20 seconds. A lot of people have told me they enjoy that sound, too. Thanks for your comment!
Thank you for dropping by, watching the video, and commenting! Glad you liked it. This is turning out to be one of my favorite mines, too. Part 2 will be available for viewing this coming Thursday at 3:00 PM Pacific Time.
Thanks for checking out this three part series on the Loomis Mine. I had a lot of fun with this one. If you watched Part 3, you know that I lost a flashlight in one of the upper levels. I plan on going back there this summer to see if it’s still there and to further explore some of those areas I did not get into.
Good video thanks for taking us along looking forward to part two this old mine was a great find the old tree timbers holding all that rubell for at least 100 years and still holding, and all the cool old artifacts. Sharing on my FB page.
Thank you, Tom! Thanks for your continued support here on my channel. I do appreciate it. And thanks for spreading the word on your Facebook page. Part 2 where I descend the inclined shaft and explore the three lower levels will be coming out this Thursday.
Wow... That is so cool! I really like the longer video. It's amazing how much they could do at the dawn of modernization. Mules probably pulled the carts and that cross was probably intentional. That ladder system to the lower levels looks exciting, I can't wait for the next episode. Once again a stellar video with fantastic narration.. thank you for all you do!
Thanks, Mike! I normally don't post videos longer than 15 minutes or so, but I had so much footage from this first level. As I explained in another reply, I also don't post videos longer than 15 minutes because my old computer has a difficult time rendering and saving the videos. Anything beyond 15 minutes really pushes the computer and causes it to freeze repeatedly which means I have to restart the rendering and saving process all over again. At any rate, this was a cool little mine. Not the most extensive one, but it had its own characteristic charm. The lack of graffiti and trash was also nice. Part 2 comes out this Thursday! Thanks again, Mr. Krutz!
I agree with you - the lack of modern trash and graffiti was a nice change of pace from some of the other mines I recently posted videos of. Thanks for stopping by and checking out this latest video of mine - I appreciate it!
Man, what a trip RUclips has been lately. Or just my mind needing some action, gone from climbing, to cave exploring to cave sinkhole diving, death and tight spots. Now I'm here for some mine trip. Awesome!
ReadyPlayerOne The hobby of exploring abandoned mines definitely is a niche hobby. You never know - you might find out that you’d be really into exploring abandoned mines yourself once you watch a few videos of it. Thanks for stopping by!
Absolutely love everything about an older mine this one seems well preserved glad no one took the old tree cross ties an some of the machinery definitely worth the wait thanks frank can’t wait for #2 👍👍👍 as always be safe
Exploring Abandoned Mines and Unusual Places no sir I thank you for all your work involved in giving us all an awesome look at early an modern history I for one absolutely love as obvious 340,000 subscribers I no there’s a lot of work much respect frank ❤️❤️
Frank , have you ever explored the Cerro Gordo mine in the Inyo mtns southeast of Lone pine ??? .what about the mines in the Panamint range up in Panamint city ghost town just below Telescope peak
This was a great video and I enjoyed it very much. I'm glad that you are safe and able to make the second part and I look forward to more videos like this. Provided that the mine safety allows, the end part where you were exploring the inclined shaft was very entertaining
You will see the lower three levels off that inclined shaft in Part 2 which will come out this Thursday afternoon. Thanks for checking out Part 1, and thanks for taking the time to write a comment! I appreciate your support!
@@AbandonedMines11 you're very welcome. I've been watching since the Thrunite flashlight in the cave during the thunderstorm. Be safe, i explored the Sunflower mines in AZ when i was a kid, always loved them and haven't had an opportunity to visit them
Hey! Thanks so much for stopping by! Glad to see you here from Mr. Ballen’s channel. Thanks for coming over and taking a look around - I appreciate it.
Hi Frank, I totally agree that the wood in that pit at 4:11 does look as though it formed a square at one time for a winze or shaft. Wow that Sheave wheel has just been sat in the silence all those years, it really is a testament to how good the craftsmanship was back in those days, if that was put up today I give it 15-20 years lol. That incline looked strongly built actually, they did have pride in their work even though they did construct everything in the mine on a budget. I'm really looking forward to see what's in store in part 2, thank you for taking us along, the only thing I would recommend is maybe having rope to go down sketchy sections, that way you will always have an out should a ladder fail underneath you. Take care, much love. xx🤘💖
Hey, Sue! Nice hearing from you again! Thanks for your comment. Yes, that sheave wheel certainly was a nice find. Having a rope would be a good idea, but the inclined shaft inside this mine was angled at 45° or less. Even if something had broken, it would’ve been relatively easy to get back up the shaft. Anything steeper than 45°, though, does require a rope for obvious reasons - especially if the condition of the ladders is unknown. That’s why I always do a ton of research before going to a mine which I know there are vertical or near-vertical ladders. I like to know if other explorers have already climbed them and what the condition was.
No problem! I’ve also noticed in the videos that it’s very difficult to determine the height or width of a mine tunnel. That’s why I try to either call out or put a caption in that explains those dimensions. Yes, the angle of the inclined shaft is deceiving when viewed on video. What really gets me is when I’m there in person and looking down the entire shaft and some parts of it look pretty steep. However, when climbing up or down it, it almost always seems to be relatively the same angle and not that steep. The only shafts where the angle feels and seems the way it actually looks are the ones that are 100% vertical!
@@AbandonedMines11 Yes the camera can be very deceptive with the width, depth, angle of things. The one thing I am not keen on with video is the fish eye lens as that distorts and bends everything. x
Excellent vodeo, Frank. The natural timbers that are used throughout and the 2x4 with steel strap tracks are both really cool. The winze and ladders all look good. You're on a good roll!
This was the first time I've ever seen tree trunks and branches used as cross-ties in a mine, Tom and Julie. Very cool! Everything was in pretty good condition -- definitely no collapses and death-traps like out at the Eclipse. LOL
The sheer volume of timber used in, and around these, abandoned mines never ceases to amaze me. They must have stripped the trees and forests for miles around each mine and getting a continuous supply of heavy timber(s) into such remote locations as the mines progressed ever deeper and the subsequent demand increased, must have been a logistical nightmare in itself.
There really aren’t any trees in the vicinity of these mines that are in the desert. All of the lumber was shipped in from other parts of the state or country that are more forested. I mentioned in other replies to comments like this that the entire lumber industry must’ve been a thriving business to be in back in the day when all these mines were in great demand of lumber.
@@AbandonedMines11 OK ! Thanks for that additional info., Frank. I look forward to the next episode. And I wish all of our mines could be as dry as yours ! From me over here, in Cornwall, UK.
@@AbandonedMines11 Hi, Frank. Yes. We all live within a couple of miles of each other in this part of Cornwall. Whilst we are underground, or in the pub together afterwards, we often discuss what we've seen in your latest/most recent video(s).
There is an old abandon mine a couple miles from where I live. I rode my dirt bike up a hill like this but with a worn out dirt road. I didn’t explore it but I’m thinking of going back and going in alone. What do you guys think.
Been watching your videos for quite a while ! Really like the simple presentation you're doing, it keep the interest on the actual content and not on other things. Good job ! :D
That bell wire I showed at the top of the inclined shaft actually does go all the way down the shaft to the fourth level. Amazing that it's still there in place after all these years. Yes, the bells are still used today. Must've been a noisy work environment when everything was up and running full-steam.
I’ve got a lot of footage, so I’m not sure how many parts there will be. Probably a couple more at least. Glad you are enjoying them, though! Thanks for watching and commenting.
Might be. I'm not sure. I know a lot of modern mining companies are buying up old, abandoned claims like this one and then digging huge, open-pit mines onsite. Of course, that destroys the original mine tunnels and artifacts in the process. There is probably still silver in this mine.
This mine certainly does have that untouched quality you mentioned. Yes, it was somewhat like the Earl Wage Mine. However, that mine was truly pristine and hadn't had visitors in decades. We were able to verify that from where the mine was located. The mine in this video has had some visitors. I think I pointed out the initials of two explorers that had been written in the 1960s. Thanks for your comment!
Thanks for your comment! I appreciate your support. Yes, this mine was pretty clean - no modern graffiti or modern trash. Makes me think that not many people explore this one.
Man i always worry about you more so in these super super old mines. they look so sketchy. Hopefully u never forget ur helmet in these places! All in all i loved the vid and i always learn so much from your videos!
Hey, Jay! Thank you for your comment! I’m glad to hear that you’re learning something from my videos every now and then. I appreciate the feedback! Yes, I always have my helmet as well as my oxygen meter and hydrogen sulfide gas detector and backup flashlights. Part 2 will be coming out this Thursday at 3:00 PM Pacific Time. Thanks for your support!
I think it would be amazing to document these mines with 3D imaging. Whilst unfeasible and very expensive, making a proper 3D model of these old abandoned mines would be incredible, just to see how expansive they are and perhaps see areas unreachable on foot and that haven't been seen for many decades.
That is an excellent idea! I’m sure the equipment to do that would be rather expensive. Would be a great way to see all of the underground workings - even the ones that aren’t easily accessible.
Abandoned mines always spook the shit out of me, because of the simple fear of the unknown. Constantly fearing that something is down there with you, watching you.
I can understand where you’re coming from. Being alone in an abandoned mine doesn’t bother me, however. I never wonder if there’s anything behind me in the dark.
Exploring Abandoned Mines and Unusual Places behind me, ahead of me, somewhere deeper in the mine, I'm still afraid something might appear. The world is a disturbing place, who knows what lurks underground in these mines and caves?
Back in the old days of logging, before skidders, it was common to build a small "forest" railroad into an area you wanted to log to haul out the wood. Rails were shipped in, of course, but the track sleepers were cut from the local wood and hewed flat top and bottom with sleeper axes so they'd lay flat on the ground and the rails would spike to the top side. Looks very much like what you've got here.
One thing I learned from my mine exploring days 15 or so years ago: An exposed fault line is sometimes called a "slickenside." Keep on with the exploring and the great videos!
Hey Frank, Thank you Very much for putting this up. It is on my favorites list. Up there with the Horton haunted mine. Thanks again & Regards from Ody Siim
I’m not sure when carbide came into widespread use, so the fact that this mine was initially dug in 1881, I bet they used candles. I didn’t see any carbide graffiti that we usually see in mines from the early 1900s. That leads me to believe that they used candles. If I ever go back, I’ll have to look closely to see if there’s any carbide graffiti. I don’t think there is, though.
IDEA: is there any ossibility to 3D scan the miens where you went? :) Would be insane to show it digitally how the mine looks like. Like using LIDAR or something.
Frank, If no one has mentioned this before, you and the channel “ Abandoned and Forgotten Places “ would be an incredible collaboration!!! And, as usual, another outstanding mine exploration!!🔥👍
15:58 Why would the main tunnel stop there? I know it has to end at some point but leaving it there with the fancy coloured rocks seems kinda intentional
They may have planned to go further in that tunnel but never had a chance. Keep in mind that when these mines closed, it was often at the very last second with no advance warning. The miners would be reporting in for work in the morning, and they would suddenly be told to stop everything and leave the mine and never come back. That’s how it was back then, I guess. So they may have had plans to go further on that first level but never had a chance.
Where did they get all that wood? Is not as if there are many trees around there. Some say that all those areas used to be forest, but were cut down to use them as timbers for the mines.
Hey, Guillermo! I believe most of the timbers were shipped in. The timbering industry back then must've been an amazing and complicated operation. The mines were constantly in need of timbers. That whole industry must've made some people very wealthy.
@@AbandonedMines11 Hey thanks for answering! - Here in México there is town called "REAL DE CATORCE" packed with ancient huge silver mines (first mine was open in 1640). Today the landscape is dry and desertic, but some old drawings and paintings show big forest right before the "silver fever" that struck that part of the country around 1750-1880. If you ever have a chance, you should take a look at that part of México, most mines were abandoned in the past century and hasn't been touched since. Who knows whats down there...
That was so insane frank, what’s impressive was the size of the timbers the sheave was on mannn, how did they even get it into the line let alone the position over 100yrs ago!
I believe they used burros for all the hard, manual labor. That would be the only way to get all that heavy equipment up the mountain and into the mine. I’ve also heard from other people that large pieces of equipment that we find underground were probably taken up in pieces and reassembled once they were underground.
That sheeve is cast and that spiral spoke design is a very typical design for the time frame.... I'm sure you see similar all the time. The fact that you mentioned it looking homemade makes me wonder if it was produced by a smaller more local foundry or possibly had some repairs done at the mine.
Actually the sheave wheels are often missing from these headframes. It was a cool find, though. Based on what others have commented regarding the mine, it seems apparent that this mine was run on a small budget. You may be on to something when you said that wheel might've been produced from a local foundry. Probably was. Or maybe manufactured onsite, too. Thanks for your comment, James!
Hey, Dan! Thanks for dropping by and checking out my latest video. Sounds like you enjoyed it. Thanks for letting me know. Part 2 will be coming out this Thursday afternoon.
Been watching your videos for years, love them! Thanks for taking us all on your adventures and keeping it up! I’ve gotta ask though, are you still driving the same Toyota? I think we need an update on how many miles it has on it now! Maybe a video update?? 😊.
Right on! Thanks for the reply! I had to ask as I remember when you posted the video when it crossed over an insane amount of miles....lol. Thanks again, really love what you do for all of us out here watching!! Fan for life!!
I don’t know. I haven’t been back there. I do know one guy figured out where the mine was by doing his own research in coordination with my videos of it and went there himself and filmed it. Honestly, I don’t think a lot of people bother going to this one. I know I drove past it countless times over the last 12 years before I ever went to it!
I like this mine better than all the ones you have been in id really like to see that mine. My compliments sir looking forward to seeing the rest of the video
This mine is somewhat small in scope but it has a certain charm about it -- probably because it's not all tagged up and littered with empty water bottles and energy bar wrappers. It almost felt museum-like when I was in there...or sacred...or extremely historic, if you get my drift. Part 2 comes out this Thursday!
I just discovered this channel thanks to MrBallen. Really interesting history on show and its amazing to see how well preserved everything is here. Massive respect for this man because It takes balls to go into these places alone. It must be a great rush. That video with what sounded like creepy demon harsh whispers scared the crap outa me haha. Great content and I subscribed pretty quickly
Yep, I must thank MrBallen for finding this channel, square head nails most likely pre 1890, shanks on nails pre 1800 are square, 1800-1890 shanks were rectangular, than round after that, I always check the nail shapes out here near the superstition mountains and the older stuff I've seen is still round. Cool to be in a mine or any place that old to have square nail heads and old timbers, great channel
Exploring Abandoned Mines and Unusual Places watched it and love your channel always made me wonder if I should make videos of hiking and cross country skiing... what is peaceful for me I would think a lot would find boring but I might be wrong. Please keep up the videos! Love your channel
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Absolutely awesome video, these workings must be huge, when I saw “Part 1” and 24:00 minutes long I was floored! Fantastic artifacts and it’s fantastic that the mine is still pristine after all of this time. Definitely interesting geology as well. I’m looking forward to Part 2, lots of ladders! Thanks for sharing Frank, fantastic exploration, stay safe.
Glad you enjoyed it, Dan! I don't think I've ever uploaded a video longer than 20 minutes. I try to avoid that if I can. However, there was just too much good footage in this one. I edited it down as much as I could and still had 24 minutes of footage. That's why there'll be a Part 2 and a Part 3 and probably a Part 4!
@@AbandonedMines11 yeah more parts. i was mesmerized.
Lovely museum , hopefully no one takes anything from it
@@AbandonedMines11 you gotta watch out for gorillas and crocodiles riding in mine carts on those tracks. Surprised you made it out alive.
You are a brave man to go all the way down there by yourself
Luis Rivera fr
When you’ve done this for 13 years like I have, it’s really not that big of a deal. I remember when I first started out, though, I was always too scared to go into the mines. I would only film them from the entrance and that would be it. Some of those videos are still on my RUclips channel, I think.
Eh, I mean millions of people have done it so doing it wouldn’t make you the first
@@AbandonedMines11 u've just gotta do it other wize you''ll miss out on a lot
It's a mine.....maybe a animal living in their theirs really not much to be afraid of besides random human instinct.
Imagine running into someone deep in a mine. Holy crap that would be the thing of nightmares.
Yup
Clearly people didn’t know that you need to be below level 40 to find diamonds
@Hyperionex do you get the joke?
I’ve never even played Minecraft and I get it
What an appropriate joke 😆
Stopped
You gave to be Y 11 for most diamonds to generate
Don't you think he sounds like Nebris. from Mindcrack
Ikr
I would absolutely _love_ to spend some time looking over that unmolested, 130 year old woodwork. Totally fascinating!
It is amazing how well-preserved the desert climate makes these mines. When I saw that sheave wheel still in position at the top of that headframe, I knew the mine was something special.
@@AbandonedMines11 The lubrication was quite possibly sheep's tallow. It was used for several decades by the railroads of the era, so would have been available commercially.
Can't wait to watch. This is easily one of my absolute favorite youtube channels. Thanks for enduring these treks to bring us these easily lost bits of our history.
Wow, thanks! I appreciate the enthusiastic feedback. And support. Thank you!
Fanboy ?
I love how you answer your own questions in editing it really shows him much dedication you put into this video. Thank you for the great experience.
Sometimes I research an abandoned mine after I already went to it and filmed it. That’s when I tend to find out answers to questions I had while I was in there filming. I probably should do all the research first before heading out, but sometimes that just isn’t the case. For some abandoned mines, I go to them spur of the moment while I’m cruising down the highway.
9:21 ... Does it not look like a little white face peering through the two beams on the left side, center of frame?
Someone else said it resembles an alien. And it does!
100% it’s a face and honestly doesn’t look human
The camera is titling to almost straight up. I saw shadows move with the light that caught my attention; but nothing odd in my opinion
That shit is an alien and I totally saw it. It even blinks it's eyes! Wild...
@@guardiangregory Pause it at 9:29 and then tell me your opinion...
Wow that cable grav tram for ore carts was so cool, returning the empty car with the heavy loaded one! Thanks for going into these places (and staying safe while exploring) to bring a glimpse into the past of mining onto RUclips.
Glad you enjoyed it! The caretaker guy is the one who explained the gravity tram to me, so I'm assuming that he is correct. Thanks for checking out the video, man. I appreciate it!
I have noticed that almost all old mines have those pink or orange spray markings on the side walls. Who did these and when? Was there a massive survey of all old mines in the 70s or 80s or whenever florescent paint first came out?
Those are surveyors’ marks. They were probably put there when a company was considering re-opening the mine. I guess some of the survey marks indicate where they notice deposits of ore that could be mined at a later date. I’m sure the marks also mean other things, but I don’t have any idea what those might be. It’s hard to say how old the survey marks are. Because they are made out of spray paint, I would guess probably not older than the 1980s like you suggested. Thanks for your comment and question!
Frank , I've really enjoyed your last few video and this video of the Loomis mine is awesome . Can't believe how old this mine is and very well preserved
Glad you enjoying these last few videos. They've been of some pretty big mines, which is a nice change. I appreciate your ongoing interest here, man. Thanks!
Hey! My alias is Desert Rat too!
At about 11:40, what moved (or appeared to move) in the winch drum as you came around?
I'm hoping that was just a weird play of my flashlight beam! You have a very good eye for catching that detail! Thanks for pointing it out.
No something definitely moved. His light didn't match up to a shadow
Adrian Nava that is very weird. It does look like something white moving.
Im hooked.. going to watch part 2&3 tomorrow.. thanks for sharing this amazing footage and stories :)
Thanks for your comments, Greg! Sounds like you are enjoying my videos. Thank you very much for the support.
In that "engine" room, that's all one machine, "exploded" into a million bits. The ring gear fits on the floor side of that U frame with the gear on the side, and in that U frame sat the drum. The little Y cup, that's a speed selector for the ring gear based on the drum's rotation, i'm going to guess this, those parts were up top, where the wheel chamber is. Someone took them apart and moved them in preparation to remove them from the mine. Won't comment on when, but that's my 2 cents.
The way i see this mine, at least in its current rendition, the cheap rail, the wooden branch crossties/sleepers, that wheel atop (that's not a structurally sound design for something like an ore cart, it looks to me like it was salvaged from a horizontal application) ... this mine was run on the cheap.Like they didn't want to stack too much money inside it.
Thanks again for another informative comment. I should've realized I was in the hoist room when I was there. I assumed that the hoist would've been in that chamber behind and above the sheave wheel. I also should've gone up there to check out that upper area where the sheave wheel was, but didn't. I appreciate the information in your comments!
When you made the post for this mine, I was looking forward to it.
I find it awesome and inspiring that someone has been looking after the mine to try to keep it from being vandalized. Indeed, the condition of the artifacts has made this quite the find.
Thanks for sharing it with us! Looking forward to pt 2!
Thanks for your comment! Yes, it's cool that Roger keeps his eye on the place -- on the entire mountain, in fact! Cool dude! Part 2 will be available for viewing this Thursday. In it, I explore the three lower levels.
What a rare find Frank! Something barely seen in well over 100 years. Nice work thanks for sharing!
Glad you enjoyed it, Robert! Thank you for supporting my channel.
This mine was in great condition! Thanks for sharing with us!👍
It certainly was in great condition. No collapses, either. The rock in this mountain seems to be very, very solid.
This is actually really interesting. Things really have changed since I was a kid cracking open big rocks. Seeing how mines run and having your text explanations edited in helped me understand how everything kinda worked. Would love to take a walk through these old ruins!
Amazing video! I've been calm and relaxed this entire time. I'll watch the other parts soon :)
Thank you, Seth, for your comment! I appreciate the feedback. Glad you enjoyed the video and got something out of it. Hope to see more of your thoughtful comments on future videos! Thanks again!
I'm just catching up Frank, and this is gonna be a good series!!! Thanks for taking me along...Peace!!!
Bill
Thanks for getting caught up, Bill! I appreciate your support here.
The room at 10:30 was the hoist room. The motor and winch would have been in there with the cable up and over the sheave wheel and down the incline. The little pass throu was the hoist operations window to see the skip car coming up. Very very cool mine. Stay safe out there.
Thanks for clarifying that, Lee! When I was there, I wasn't able to figure that out for some reason. Keep in mind that I just finished a grueling hike up the mountain to reach the mine, so half the time I think I'm bordering on exhaustion. But it all makes sense now. I should've gone up that little sloped passageway in the hoist room to see what was up there. That would've taken me right to that sheave wheel, I'm sure. I can totally see how that pass-through was the window for the hoist operator to see the skip car coming up. I should've realized that then. Thanks again for the great comment and information!
@@AbandonedMines11 not a problem man. Carry some extra water with ya, never know what could happen. Been subscribed and watchin your channel for a while and have never been disappointed. Hopefully one day we can get together for some explorin. If your ever in South Dakota let me know.
No joke, sometimes the hike to the mine is the hardest part. I damn near died climbing 3000 in 3 miles a few weeks ago. Just to find the portal was collapsed. I was too tired to look around for another way in. I'll have to go back next year and find an easier way up
You’re right - sometimes the hike is the hardest part! Sorry to hear you found a collapsed portal after making such a long hike. That happens sometimes. I haven’t looked at your RUclips channel yet, but are you big on exploring abandoned mines?
It amazes me the machines are over 120 years old. Thanks
I know, Gary. And they're just sitting up there and have been sitting up there -- forever. It's nice to get them all documented on video.
I don't know why but I love the sound of the rocks crunching as you walk the drifts is satisfying somehow 😁
That's why I inserted that piece of footage where I was walking through the tunnel for about 20 seconds. A lot of people have told me they enjoy that sound, too. Thanks for your comment!
I know that discovering all of this must have been really exciting. I think that is one of your best explores and I'm looking forward to the rest.
Thank you for dropping by, watching the video, and commenting! Glad you liked it. This is turning out to be one of my favorite mines, too. Part 2 will be available for viewing this coming Thursday at 3:00 PM Pacific Time.
Again humble open miner here in Australia we do that have this type of history thanks for taking me along on this explore @18:46 thank you
Thanks for checking out this three part series on the Loomis Mine. I had a lot of fun with this one. If you watched Part 3, you know that I lost a flashlight in one of the upper levels. I plan on going back there this summer to see if it’s still there and to further explore some of those areas I did not get into.
Good video thanks for taking us along looking forward to part two this old mine was a great find the old tree timbers holding all that rubell for at least 100 years and still holding, and all the cool old artifacts. Sharing on my FB page.
Thank you, Tom! Thanks for your continued support here on my channel. I do appreciate it. And thanks for spreading the word on your Facebook page. Part 2 where I descend the inclined shaft and explore the three lower levels will be coming out this Thursday.
*spins one of the wheels.*
*gets transported back to the 1800’s*
*damn it*
Wow... That is so cool! I really like the longer video. It's amazing how much they could do at the dawn of modernization. Mules probably pulled the carts and that cross was probably intentional. That ladder system to the lower levels looks exciting, I can't wait for the next episode. Once again a stellar video with fantastic narration.. thank you for all you do!
Thanks, Mike! I normally don't post videos longer than 15 minutes or so, but I had so much footage from this first level. As I explained in another reply, I also don't post videos longer than 15 minutes because my old computer has a difficult time rendering and saving the videos. Anything beyond 15 minutes really pushes the computer and causes it to freeze repeatedly which means I have to restart the rendering and saving process all over again. At any rate, this was a cool little mine. Not the most extensive one, but it had its own characteristic charm. The lack of graffiti and trash was also nice. Part 2 comes out this Thursday! Thanks again, Mr. Krutz!
Fantastic mine, nice to see no modern trash!
I agree with you - the lack of modern trash and graffiti was a nice change of pace from some of the other mines I recently posted videos of. Thanks for stopping by and checking out this latest video of mine - I appreciate it!
Man, what a trip RUclips has been lately. Or just my mind needing some action, gone from climbing, to cave exploring to cave sinkhole diving, death and tight spots. Now I'm here for some mine trip. Awesome!
ReadyPlayerOne The hobby of exploring abandoned mines definitely is a niche hobby. You never know - you might find out that you’d be really into exploring abandoned mines yourself once you watch a few videos of it. Thanks for stopping by!
Absolutely love everything about an older mine this one seems well preserved glad no one took the old tree cross ties an some of the machinery definitely worth the wait thanks frank can’t wait for #2 👍👍👍 as always be safe
Add to hear you enjoyed it, Steve! As always, thank you very much for your support and comments.
Exploring Abandoned Mines and Unusual Places no sir I thank you for all your work involved in giving us all an awesome look at early an modern history I for one absolutely love as obvious 340,000 subscribers I no there’s a lot of work much respect frank ❤️❤️
At 11:39 inside the gear, you can see something white move from right to left. it does not look like an animal
I saw that.
Frank , have you ever explored the Cerro Gordo mine in the Inyo mtns southeast of Lone pine ??? .what about the mines in the Panamint range up in Panamint city ghost town just below Telescope peak
I think I’ve been to some of the ones up in the Panamint Mountains but that was a long time ago.
Wonderful mine, looking forward to Part 2
Coming soon! Thanks for your ongoing support!
Really great report. Fascinating. Look forward to seeing more. Hope you are well.
Thanks, Paul! Glad you enjoyed it. Part 2 comes out this Thursday where I explore the three lower levels.
This was a great video and I enjoyed it very much. I'm glad that you are safe and able to make the second part and I look forward to more videos like this. Provided that the mine safety allows, the end part where you were exploring the inclined shaft was very entertaining
You will see the lower three levels off that inclined shaft in Part 2 which will come out this Thursday afternoon. Thanks for checking out Part 1, and thanks for taking the time to write a comment! I appreciate your support!
@@AbandonedMines11 you're very welcome. I've been watching since the Thrunite flashlight in the cave during the thunderstorm. Be safe, i explored the Sunflower mines in AZ when i was a kid, always loved them and haven't had an opportunity to visit them
I discovered this channel because of MrBallen. You are brave man and keep those awesome videos coming.
Hey! Thanks so much for stopping by! Glad to see you here from Mr. Ballen’s channel. Thanks for coming over and taking a look around - I appreciate it.
Hi Frank, I totally agree that the wood in that pit at 4:11 does look as though it formed a square at one time for a winze or shaft. Wow that Sheave wheel has just been sat in the silence all those years, it really is a testament to how good the craftsmanship was back in those days, if that was put up today I give it 15-20 years lol.
That incline looked strongly built actually, they did have pride in their work even though they did construct everything in the mine on a budget. I'm really looking forward to see what's in store in part 2, thank you for taking us along, the only thing I would recommend is maybe having rope to go down sketchy sections, that way you will always have an out should a ladder fail underneath you. Take care, much love. xx🤘💖
Hey, Sue! Nice hearing from you again! Thanks for your comment. Yes, that sheave wheel certainly was a nice find. Having a rope would be a good idea, but the inclined shaft inside this mine was angled at 45° or less. Even if something had broken, it would’ve been relatively easy to get back up the shaft. Anything steeper than 45°, though, does require a rope for obvious reasons - especially if the condition of the ladders is unknown. That’s why I always do a ton of research before going to a mine which I know there are vertical or near-vertical ladders. I like to know if other explorers have already climbed them and what the condition was.
@@AbandonedMines11 It's so hard to tell the angle of slope on camera, my excuse I'm sticking to lol. Take care okay. x
No problem! I’ve also noticed in the videos that it’s very difficult to determine the height or width of a mine tunnel. That’s why I try to either call out or put a caption in that explains those dimensions. Yes, the angle of the inclined shaft is deceiving when viewed on video. What really gets me is when I’m there in person and looking down the entire shaft and some parts of it look pretty steep. However, when climbing up or down it, it almost always seems to be relatively the same angle and not that steep. The only shafts where the angle feels and seems the way it actually looks are the ones that are 100% vertical!
@@AbandonedMines11 Yes the camera can be very deceptive with the width, depth, angle of things. The one thing I am not keen on with video is the fish eye lens as that distorts and bends everything. x
I think some GoPro cameras have that fisheye lens. I don’t like that, either.
I still can't believe that you do these videos on your own....brave man and beautiful mine, lovely echo.
Thanks for your comments! Yes, this mine was pretty clean and extremely stable. Everything was in such good condition!
Your Videos make my day go good and give me information on hard rock mining.
Glad to hear it! I appreciate your support.
That "1966" engraving is awesome.
Thanks for sharing! Beautiful mine!
Right on, Paul! A big thank you to you, too, for taking the time to watch and comment.
Very interesting mine Frank, your getting more adventurous and knowledgeable.
More to come! Thanks, Barry!
Excellent vodeo, Frank. The natural timbers that are used throughout and the 2x4 with steel strap tracks are both really cool. The winze and ladders all look good. You're on a good roll!
This was the first time I've ever seen tree trunks and branches used as cross-ties in a mine, Tom and Julie. Very cool! Everything was in pretty good condition -- definitely no collapses and death-traps like out at the Eclipse. LOL
@@AbandonedMines11 Fun to see, and little to no paint.
11:34 somethings hiding in there
Lighting angles. Notice the gap behind the gear?
Dude its just lighting angle, no demons.
@@hassenalwaely6215 I thought it was a mouse or something lol
@@gabimurray5955 could have been.
Thanks Frank, looking forward to part 2!
Thank you, Doug! Part 2 will be out this Thursday at 3:00 PM Pacific Time.
The sheer volume of timber used in, and around these, abandoned mines never ceases to amaze me. They must have stripped the trees and forests for miles around each mine and getting a continuous supply of heavy timber(s) into such remote locations as the mines progressed ever deeper and the subsequent demand increased, must have been a logistical nightmare in itself.
There really aren’t any trees in the vicinity of these mines that are in the desert. All of the lumber was shipped in from other parts of the state or country that are more forested. I mentioned in other replies to comments like this that the entire lumber industry must’ve been a thriving business to be in back in the day when all these mines were in great demand of lumber.
@@AbandonedMines11 OK ! Thanks for that additional info., Frank. I look forward to the next episode. And I wish all of our mines could be as dry as yours ! From me over here, in Cornwall, UK.
You're in the UK? Cool! Have you hooked up with the other Cornish explorers who explore abandoned mines?
@@AbandonedMines11 Hi, Frank. Yes. We all live within a couple of miles of each other in this part of Cornwall. Whilst we are underground, or in the pub together afterwards, we often discuss what we've seen in your latest/most recent video(s).
There is an old abandon mine a couple miles from where I live. I rode my dirt bike up a hill like this but with a worn out dirt road. I didn’t explore it but I’m thinking of going back and going in alone. What do you guys think.
Oh man love these vids, keep it up, man! Looking forward to part 2! Cheers from mx
Glad you like them! Thanks for letting me know! Nice to hear from a fan down in Mexico.
Been watching your videos for quite a while ! Really like the simple presentation you're doing, it keep the interest on the actual content and not on other things. Good job ! :D
Thanks for the feedback, Jonathan! I appreciate it. And thank you, too, for taking the time to watch the video and to write a comment.
They still use bells for the cage in mines today, they are just electric and annoying as hell, especially when you are working near the cage.
That bell wire I showed at the top of the inclined shaft actually does go all the way down the shaft to the fourth level. Amazing that it's still there in place after all these years. Yes, the bells are still used today. Must've been a noisy work environment when everything was up and running full-steam.
Great 👍 explore frank can’t wait until your next video
Coming soon, Richard! Thanks for your support!
Holy cow!!
How many parts will there be?!?
Great video can't wait for part 2!!! Thanks for the great videos Frank
I’ve got a lot of footage, so I’m not sure how many parts there will be. Probably a couple more at least. Glad you are enjoying them, though! Thanks for watching and commenting.
@@AbandonedMines11 I'm ready and waiting for more!!
I'll be here sir!
Love it, almost untouched with old artifacts & no modern garbage.
So true. Thank you for watching and commenting!
Just curious but with modern extraction techniques, would it pay off to reprocess the tailings they left? Would be easy pickings!
Might be. I'm not sure. I know a lot of modern mining companies are buying up old, abandoned claims like this one and then digging huge, open-pit mines onsite. Of course, that destroys the original mine tunnels and artifacts in the process. There is probably still silver in this mine.
The untouched aspect of this mine reminds me of the "Earl wage" mine you shot a few years back. I hope there is a lot of footage of the Loomis mine!
This mine certainly does have that untouched quality you mentioned. Yes, it was somewhat like the Earl Wage Mine. However, that mine was truly pristine and hadn't had visitors in decades. We were able to verify that from where the mine was located. The mine in this video has had some visitors. I think I pointed out the initials of two explorers that had been written in the 1960s. Thanks for your comment!
That woodwork and all design of the various parts in that mine were beautifully done!
Glad you appreciated the woodwork! Thanks for your support!
It’s amazing how clean it is. Nothing really left behind by miners.
Thanks for your comment! I appreciate your support. Yes, this mine was pretty clean - no modern graffiti or modern trash. Makes me think that not many people explore this one.
Man i always worry about you more so in these super super old mines. they look so sketchy. Hopefully u never forget ur helmet in these places! All in all i loved the vid and i always learn so much from your videos!
Hey, Jay! Thank you for your comment! I’m glad to hear that you’re learning something from my videos every now and then. I appreciate the feedback! Yes, I always have my helmet as well as my oxygen meter and hydrogen sulfide gas detector and backup flashlights. Part 2 will be coming out this Thursday at 3:00 PM Pacific Time. Thanks for your support!
11:05 is that a modern can or from the miners? 🥫
I believe that was a small can of V-8 vegetable juice. Probably left from a more modern explorer.
I think it would be amazing to document these mines with 3D imaging. Whilst unfeasible and very expensive, making a proper 3D model of these old abandoned mines would be incredible, just to see how expansive they are and perhaps see areas unreachable on foot and that haven't been seen for many decades.
That is an excellent idea! I’m sure the equipment to do that would be rather expensive. Would be a great way to see all of the underground workings - even the ones that aren’t easily accessible.
Very impressive old mine! Amazing how sturdy all the woodwork is...considering how old it is. Hand built quality!
Abandoned mines always spook the shit out of me, because of the simple fear of the unknown. Constantly fearing that something is down there with you, watching you.
I can understand where you’re coming from. Being alone in an abandoned mine doesn’t bother me, however. I never wonder if there’s anything behind me in the dark.
Exploring Abandoned Mines and Unusual Places behind me, ahead of me, somewhere deeper in the mine, I'm still afraid something might appear. The world is a disturbing place, who knows what lurks underground in these mines and caves?
Back in the old days of logging, before skidders, it was common to build a small "forest" railroad into an area you wanted to log to haul out the wood. Rails were shipped in, of course, but the track sleepers were cut from the local wood and hewed flat top and bottom with sleeper axes so they'd lay flat on the ground and the rails would spike to the top side. Looks very much like what you've got here.
Interesting! Thanks for that information!
I saw a video from you months ago and forgot about ur channel. I’m glad it dropped back into my recommended. I just subbed
Glad to have you back! Thanks for your support. I hope to have some new videos coming within the next week or so.
Thank you for sharing this amazing mine and its history with us!
Thanks, man, for stopping by and checking out the video. Sounds like you enjoyed it. Glad to hear that!
Hi Frank!!!!! Really enjoy your explorations, but please take care and be safe!!!!!!
Hey, George! Nice hearing from you again! Thank you!
How was the hoist/winch powered? Was there a steam engine or did they have electric motors in 1890s?
Being that it was the 1880s, I'd have to guess steam powered. I don't know, though. That is a good question.
Seen this mine on Abandoned and Forgotten Places. It is neat to see two seperate people and how each person goes about it.
Nice mine you tell no one has been there in a long time by the dust no foot prints very good video Frank 👍
Thanks for watching and commenting, Ronnie! Always nice hearing from you. Thank you for your continued support of my channel and videos. Means a lot!
One thing I learned from my mine exploring days 15 or so years ago: An exposed fault line is sometimes called a "slickenside." Keep on with the exploring and the great videos!
I’ve heard of that term myself but really didn’t know what it meant. Thanks for your comment!
Hey Frank, Thank you Very much for putting this up. It is on my favorites list. Up there with the Horton haunted
mine. Thanks again & Regards from Ody Siim
Glad you enjoyed it! Thanks for commenting! I appreciate it. And thanks, too, for being a subscriber for the last four years if not longer.
The equipment in there was amazing! Great video!
Absolute legend.
Thanks for your comment! I take it you’re a fan of Minecraft?
Hi how would they light that mine in those days when they were working many thanks Eliot
I’m not sure when carbide came into widespread use, so the fact that this mine was initially dug in 1881, I bet they used candles. I didn’t see any carbide graffiti that we usually see in mines from the early 1900s. That leads me to believe that they used candles. If I ever go back, I’ll have to look closely to see if there’s any carbide graffiti. I don’t think there is, though.
IDEA:
is there any ossibility to 3D scan the miens where you went? :) Would be insane to show it digitally how the mine looks like. Like using LIDAR or something.
There probably is, but I'm not set up to that. I would imagine that equipment would be super expensive, too.
@@AbandonedMines11
~150USD :)
www.spar3d.com/blogs/the-other-dimension/scientist-builds-lidar-cave-scanning/
Great video! I'd love to go mine exploring someday, but untill then I'm grateful for these videos
Certainly glad to have you following along in the videos, Iulia! Thank you for spending some time here on my channel.
Frank,
If no one has mentioned this before,
you and the
channel “ Abandoned and Forgotten Places “ would be an incredible collaboration!!!
And, as usual, another outstanding mine exploration!!🔥👍
Thanks for your comment! I appreciate you spending some time here on my channel. Thanks for your support!
Fantastic video Frank, full of amazing artefacts can’t wait for part two 🇬🇧🛸👍👍👍👍
Good hearing from you again, Geoff! Part 2 will be coming out this Thursday afternoon at 3:00 PM Pacific Time. Thanks for your support!
15:58 Why would the main tunnel stop there? I know it has to end at some point but leaving it there with the fancy coloured rocks seems kinda intentional
They may have planned to go further in that tunnel but never had a chance. Keep in mind that when these mines closed, it was often at the very last second with no advance warning. The miners would be reporting in for work in the morning, and they would suddenly be told to stop everything and leave the mine and never come back. That’s how it was back then, I guess. So they may have had plans to go further on that first level but never had a chance.
Where did they get all that wood? Is not as if there are many trees around there. Some say that all those areas used to be forest, but were cut down to use them as timbers for the mines.
Hey, Guillermo! I believe most of the timbers were shipped in. The timbering industry back then must've been an amazing and complicated operation. The mines were constantly in need of timbers. That whole industry must've made some people very wealthy.
@@AbandonedMines11 Hey thanks for answering! - Here in México there is town called "REAL DE CATORCE" packed with ancient huge silver mines (first mine was open in 1640). Today the landscape is dry and desertic, but some old drawings and paintings show big forest right before the "silver fever" that struck that part of the country around 1750-1880. If you ever have a chance, you should take a look at that part of México, most mines were abandoned in the past century and hasn't been touched since. Who knows whats down there...
Really enjoyed the trip into the past!
Thanks for letting me know, Jacki! I appreciate it. Thanks for commenting, too.
That was so insane frank, what’s impressive was the size of the timbers the sheave was on mannn, how did they even get it into the line let alone the position over 100yrs ago!
I believe they used burros for all the hard, manual labor. That would be the only way to get all that heavy equipment up the mountain and into the mine. I’ve also heard from other people that large pieces of equipment that we find underground were probably taken up in pieces and reassembled once they were underground.
Excellent video thanks for sharing with us to enjoy
Thanks for watching, David! And thanks for your recent comments.
Absolutely love your videos!! Appreciated dude! 👍
Glad to hear it! Thanks for your support!
That sheeve is cast and that spiral spoke design is a very typical design for the time frame.... I'm sure you see similar all the time. The fact that you mentioned it looking homemade makes me wonder if it was produced by a smaller more local foundry or possibly had some repairs done at the mine.
Actually the sheave wheels are often missing from these headframes. It was a cool find, though. Based on what others have commented regarding the mine, it seems apparent that this mine was run on a small budget. You may be on to something when you said that wheel might've been produced from a local foundry. Probably was. Or maybe manufactured onsite, too. Thanks for your comment, James!
Another awesome vid, you take us to some stunning locations. Keep up the great work Frank 👍
Hey, Dan! Thanks for dropping by and checking out my latest video. Sounds like you enjoyed it. Thanks for letting me know. Part 2 will be coming out this Thursday afternoon.
Been watching your videos for years, love them! Thanks for taking us all on your adventures and keeping it up! I’ve gotta ask though, are you still driving the same Toyota? I think we need an update on how many miles it has on it now! Maybe a video update?? 😊.
Awesome! Thank you! Yes, still driving the same Toyota. Almost has 400,000 miles on it. Will post a video of that when it occurs.
Right on! Thanks for the reply! I had to ask as I remember when you posted the video when it crossed over an insane amount of miles....lol. Thanks again, really love what you do for all of us out here watching!! Fan for life!!
Ah the good old days where stuff would last more than 2 years
its just planks and metal. what you on about?
awsome explore can't wait to see part 2
Thanks so much! Part 2 comes out this Thursday!
Your voice reminds me of Badger, from Breaking Bad, haha. Now I can't not imagine him in this mine, telling us about history. Great video.
Other viewers have said the same thing a long time ago. I can hear the resemblance.
Amazing exploration!!
I bet Roger got a lot more visitors after this video going live. Hope he took advantage of it and started selling guided tours.
I don’t know. I haven’t been back there. I do know one guy figured out where the mine was by doing his own research in coordination with my videos of it and went there himself and filmed it. Honestly, I don’t think a lot of people bother going to this one. I know I drove past it countless times over the last 12 years before I ever went to it!
I like this mine better than all the ones you have been in id really like to see that mine. My compliments sir looking forward to seeing the rest of the video
This mine is somewhat small in scope but it has a certain charm about it -- probably because it's not all tagged up and littered with empty water bottles and energy bar wrappers. It almost felt museum-like when I was in there...or sacred...or extremely historic, if you get my drift. Part 2 comes out this Thursday!
7:43 looks like a great rollercoaster idea.
yeah WOW, thats what i said, WOW. i like that "room" with the ladders and levels. GO FRANK.
More to come from this one! Stay tuned for Part 2. Thanks again for taking the time to watch and comment!
I just discovered this channel thanks to MrBallen. Really interesting history on show and its amazing to see how well preserved everything is here. Massive respect for this man because It takes balls to go into these places alone. It must be a great rush. That video with what sounded like creepy demon harsh whispers scared the crap outa me haha. Great content and I subscribed pretty quickly
Glad to see you here! Thanks for the support! Glad you’re enjoying the videos - I appreciate hearing that. Thank you very much!
Yep, I must thank MrBallen for finding this channel, square head nails most likely pre 1890, shanks on nails pre 1800 are square, 1800-1890 shanks were rectangular, than round after that, I always check the nail shapes out here near the superstition mountains and the older stuff I've seen is still round. Cool to be in a mine or any place that old to have square nail heads and old timbers, great channel
so jealous, id love to have a look around that old mine
Thanks for commenting, Pete.
Very interesting. The tram system outside was way cool. The old infrastructure was amazing.
I agree! I’ll send you an email with some details about this mine that you’ll find interesting.
Great video! I can’t wait for the second 👍
Part 2 is already up on RUclips! Enjoy! Thanks for stopping by and commenting, too.
Exploring Abandoned Mines and Unusual Places watched it and love your channel always made me wonder if I should make videos of hiking and cross country skiing... what is peaceful for me I would think a lot would find boring but I might be wrong. Please keep up the videos! Love your channel