Mounting of roller runner systems: Do-It-Yourself with Hettich
HTML-код
- Опубликовано: 9 окт 2012
- Roller runners are mounted in two stages:
First mount the roller runner's angled component underneath the drawer flush with the front panel.
The drill holes for the cabinet part's screw-mounting positions are then marked on the inside of the furniture carcase. The exact positions depend on drawer lengths and heights, and are shown in the installation instructions for the particular runner.
Once both parts of the runner are screwed in place, push the drawer into the carcase. A roll-out guard prevents the drawer from being pulled out of the furniture in everyday use.
When installing a roller runner, always make sure you allow a space of 2 mm to the front carcase edge. This applies to all roller runners - regardless of drawer length.
For more information, visit www.hettich.com
It took me three days to figure out how to install my drawer into the unit and when I saw this video and how easy it was, words can't explain
I know Im quite off topic but do anybody know of a good site to watch newly released tv shows online ?
One the best videos out there, straight to the point..
Thank you so much! Glad it helped!
Thank you.
Thank u for this video. So helpful!
Thank you, I had 4 pieces I'm the box and could not work out how to put it together ❤🎉 so easy thanks
Great! 😊😊
Thank you very much, it helped me so much than the drawing I had.
We are happy to hear that. 😊
J’ai regardé la vidéo j’ai directement réussi alors que ça fait 2 jours que j’essaye merci beaucoup
Great to hear that! ☺
Thank you so much. This helped me convince my friend to be team wheels :)
Great! We're glad, that it helped you! 🤗
thank you for this video. It showed me hoe to put the sliders in the correct position.
Thank you
thank you!!
the video was interesting and more precisely rendered. its however did not use line to fix the cabinet slide and the slide didn't lie horizontally
Dear +Barih Adelakun,Thank you for your comment. Please note that the line of fixing must be horizontally, but exp. the rear end of the runner itself might drop a little into the cabinet. (Depending on the Version you have in use)What you have discovered might be a technical feature called "self closing" of the drawer on the last few centimeters.Best regards, your Hettich RUclips Team
More tips like that Bro
What is the code number of the runner that is attached to drawer and the code number of runner that is attached to cabinet ?
Saved me a lotta time. !
Thank you Thank you thank you sooooooooooooo much
🤗🤗
Many thanks👌
May I take off that complete drawer to clean
Can you replace the plastic wheels on the slider I can’t seem to remove them, How ?
Please contact our customer service info@hettich.com. Thank you!
Me at 0:05 second mark of vide: that's what I was doing wrong 🤦♂️
Thanks!
Glad, that our video helped you! 🤗
Why is there no video to tell me about how much space should I need to leave between the drawer and the side of the wall for installing the roller runner system?
One inch
Harikaa
What clearance is required on both sides for runners
Hello! Please contact our customer service via info@hettich.com. Our team will help you out. 🙂 Kind regards, your Hettich Social Media Team
Hey so I’m trying to screw in the screws but they won’t hold the rail
Hello! Thank you for your comment. 🙂Please contact our customer service via info@hettich.com. Our colleagues will help your question. Kind regards, your Hettich Social Media Team
In my case when I pull out the tray , it rolls out over one of the guards and falls down. What am I doing wrong ?
Hi! Please contact our customer service via info@hettich.com. Our experts will help you with your problem. Kind regards, your Hettich team
Thank! I broke mine and can't tell my parents
Can I buy them at home Depot
Hello, thank you very much for your comment. Please have a look at our website for your country: web.hettich.com/en-us/home. There you will find a contact locator to find a retailer near you or contact options for local customer service. Kind regards from the Hettich Social Media Team
I followed what you did in your video but my drawer keeps on falling out from the roller runner ...what will I do?
call the police!
Wide
@@JohnUk65 😂😂😂😂😂
Where do I buy tnis runner
Hi! Where do you come from?
anees
Woodprix is nice for that.
You can use WoodPriX instructions to build it yourself guys.