question: i currently own tinkhawk 2 that came with the goggles and transmitter. if i buy the tiny hawk freestyle version will i be able to use the goggles and transmitter?
Great to know that Emax is listening. I have almost 100 dollars in my Freestyle and its good to know that if it all goes down I can almost get the same result again just by going out and getting the new version.
Buzzing I just got mine in the air. I cant wait to get flying again after giving up on my old quads. I bought this and with in 30mins in flying. So so happy.
Thank you Andy, this answers why I wasn't getting better range yesterday. Only used smart audio to change power, didn't realise it resets every flight. Once again you save me time and frustration, I can go enjoy instead of testing and reading manuals. THANKS
I upgraded the VTX in my first one and put a runcam nano in with a 3D printed part, flew great but receiver was still crap and a failsafe resulted in a crash which killed the FC. Problem is a replacement FC costs almost as much as I paid for it in the first place.
Thanks for the good content! Might be a dumb question but I’m so new to this. How can I unlock and adjust it from 25 to 200 MW VTx ? Thanks for any info 🙏🏽
Andy you are the best RC RUclipsr hands down. The only one that shows the betaflight stuff and all the changes you made. Always consistent unbiased reviews. I appreciate your hard work
I was and still am perfectly happy with my Freestyle 1. HOWEVER, when I got my Race, the inferior quality picture from the original Freestyle camera became more obvious, so I bought the newer camera and made some 3D printed post mounts for it. Doing it this way also allowed me choice of the lens, 1.8 or 2.1 to best suit me. I have not found any issues with the VTX from the Mk1, maybe because if I want more range I'll want to be flying something bigger from my collection anyway. I'm glad they have made this change for new users, and its great they listen, EMAx do seem currently to be ahead of many in the way they bother to test and set up, and to take advantage of new items, but its an easy mod for those with a Mk1. Good review as always Andy.
Thanks mate for sending me the link for your review of the Freestyle 2 when I commented on the one you did for the original. Feel rather pleased with myself as I changed very little too but the RX loss was one of them. I'll definitely have to re-watch and find that button for the vtx, shame you gotta do it every time! Got to be a way around that! Pain in the butt plugging those batteries in in the first place. I did not notice the two profiles, I will have to check that out. Thanks again! Oh, that was some great flying too! Cheers!
@@AndyRCchannel Could u explain a little bit more what do you mean with "press the button when u put the lipos in" like do u mean the reboot button? Wouldnt make sens to me. Didnt know is just show 200 mw but is still 25.
Like the aircraft but mine "exploded" after only a few flights during a normal Bettafilght Air Mode landing. Somewhat bumpy landing but not at all unsual. The SUPPORTS are made from NYLON and stripped out. Pieces and screws went every which way. I'm replacing them with METAL. Lost one of the camera supports during the incident. 3D Printing another one. Having to design it myself. Unable to find one online. Can't wait to get it back in the air. Really performs. Hopefully it will hold up this time after fixing the DESIGN FLAW. 2s is about as big as you want to go on this class aircraft. Have a couple 3s in this size, too awkward.
I was able to achieve 10 minutes of hovering on the original 1s emax batteries. Can’t wait to see how long it will last outdoors with my 550 mah 1s batteries. Can’t test it out yet as unfortunately i have a weather problem here aswell 😊
Just got my TH2FS a few days ago, and i've been trying to tune out mid throttle oscillations out for the past few hours. I wasn't sure what it was but I noticed the PID values for my Profile 2 were completely different than the ones you had on screen. I copied them to PID profile 3 and reverted my filtering to defaults, hopefully I can shake these oscillations before my 360GO and mount show up this week.
I looked at the PID profiles on mine but, I guess I missed the throttle limit. That would probably explain the voltage sag that I was getting on profile 1. I'll still be swapping to XT30 though. I really don't like the 2x 1S battery setup. They at least stay in place if you use a bit of Ummagrip though. Nice review, as always.
im assuming to switch the vtx to 200mw, you only have to press the button once when you first plug in the batteries and then it is saved and you dont have to press it anymore, just wondering great review, was wondering about the voltage sag
I don't think you need to change the freestyle profile to rate 2 for 2S batteries (I think that was only for the tinyhawk2, not the freestyle). That's why they don't include the 1S adaptor plug (they figure everyone will fly the freestyle on 2S, so it comes configured for 2S out the box). I fly mine on rate1 profile and haven't had issues. You are better of switching out for X30 connectors and buying better LiPo's anyway.
Hi, thank you for the review! I´d like to ask, if is it possible to use transmitter and goggles from the old Tinyhawk (1)? (I mean that first one 75mm whoop style with white plastic cover) Because the look totaly similar. Thank you!
Looks more of a refresh than a new version... Should have kept that "II" moniker for something better. Sadly this has nothing on a fully upgraded Freestyle with the R9, Baby Ratel and TBS Nano 32.
Hi sir.. im new to all this is there anyway u could do a video on the tinyhawk II Freestyle drone and speedy bee set up and how to set up and bind a betafpv lite radio transmitter 2 and the any tips plz and ty much sir or if u know of any good links
Also important to set up VTX smart audio in the ports tab by enabling tramp VTX also it has been my personal experience the emax lipos suck one will puff everytime...love your videos!
First timer here. Just bought the rtf kit with this drone. It was a blast until I crashed it and broke the battery connector... So as a total noob I'm wondering if I purchase a replacement freestyle II what will I have to do to make it work with the controller and goggles from my kit?
I'm sure you figured it out by now but if not. You would just need to rebind. That said I'm sure you've out grown the controller that came with the rtf kit as have switched to a better one.
Andy, what is the mounting hole dimensions for the ESC board? Looks like a standard whoop size one way, and a bit longer the other way. Looks like a possible great AIO for a super lightweight Toothpick 3 inch build.
Does anyone know if you have to unlock the VTX with every battery? Or is it just once and you're done? If the former, that would get pretty annoying right?
When I ordered the tinyhawk 1 last year it was stoped at customs, I have ordered this one so fingers crossed this time because I really what one of these
@@kjj8770 yes uk, I think it was because of the batteries. ps my larva x was sent to me faulty by banggood and I did not get a full refund just some points. last year was a bad year for me. this year not looking good as well lol.
Hey dude, Loving the videos. I've got experience in RC. But new to the FPV world. At the moment I'm weighting up my beginner set up. I was looking at the nazgul evoque. Im not sure whether to go analogue or digital (DJI setup - with DJI goggles) I dont really want to buy multiple goggles, trying to keep costs down. Any thoughts? what do you suggest?
Hey Andy, quick question. If I unlock the VTX after I turn on the quad. Would I need to turn it on again after I've done my flight and a put a new battery in?
Hey, I was wondering how did you make the antenna stand up on the tinyhawk freestyle 1. I want to do the same for my tinyhawk 2 freestyle. Did you add a antenna tube ? Looked like you used a zip tie and heat shrink only.
for a felld like mine id go for the freestyle. It's got a longer flight time than the phantom. But if I needed more Range then the phantom has a full range receiver so which ever one of those is more important to you
Loved the first one, this one looks to be even better. Now just need some European vendors to have it in stock, cause anything from banggood is taking ages currently.
Hey Andy i hope this isn't rude to ask but could you turn on the Throttle Meter for these Reviews ? I personally would like to see what you're doing on the throttle :) No worries if that's not something you want to do.
Thanks so much for this video. I now have my TinyHawk Freestyle 2 and I am wondering do I have to unlock the vtx once? Or every single time I power it up to fly it? Dumb question I suppose, but I am wondering how long that vtx button will last if every single time I power up I have to push that button to unlock the higher frequency.
hi Andy, great video. With the rate profiles I have been flying on profile 1 with 2 x 1s batteries.. are you saying i should switch to profile 2 in this case to avoid voltage sag? cheers and thank you
its difficult to say as some people are advising they have changed the profiles since my review. Which ever has a 75 percent cut on the throttle should be for 2s otherwise the voltage will sag too much without that.
@@AndyRCchannel Hey Andy :) Will flying without the Throttle limit decrease the life of my batteries or is it just better for a more linear battery performance ?
I have bought every Tinyhawk since the original and will be getting a Babyhawk r pro soonish. My Tinyhawk Freestyle I upgraded The VTX, Camera, lipo connector and frame. It’s freaking fast I love it... My maiden flight with it is the newest video on MY CHANNEL BranMan FPV. About time they did it if you ask me the original Tinyhawk Freestyle should have had these upgrades already.. The only upgrade was a frame and the motors? What’s up Emax?
Thanks, ordered. Seems like a good way to get into FPV acro without spending too much and putting anything/anyone at risk. Will this work with the Teranis X9 lite out of the box?
@@AndyRCchannel thanks for the reply, just watched the dronecamps rc review and he mentioned d16 so was hopeful. I have the controller for the tinyhawk 1 rtf kit so assume i will be able to use that to start with?
Hi, I just brought a Tinyhawk2 and my son in Bataflight after doing a Backup, perform a reset, and even after a restore the drone is like dead no more everything, do you have any idea what can I do to put it back to work? I will really appreciate it. Thanks
Hey Andy I’m looking for a quad as a step up from my tinyhawk 2 freestyle and was wondering what toothpick you would recommend. I’m considering the geprc phantom - is it noticeably more powerful? What toothpick would you recommend as an upgrade? Thanks!!!
I have the rtf version , I unlocked the the vtx and turned it up to 200, and I’m sure it’s unlocked because I’m able to get the locked channels. But I still get a lot of breakup even on different channels . Is it the goggles ? And what can I do .
The goggles you get with the RTF kit are pretty bad, to put it lightly. The linear antennas that come with it are basically the bottom of the barrel in terms of quality. If you get a pair of Eachine EV800D's or FarShark Scouts you'll be much happier. The FatSharks have a higher picture resolution but the EV800D's have a bit better range based on some tests posted on RUclips. It's worth mentioning the FatSharks are twice the price.
Hey Andy! Can you tell me if my goggles and controller of my tinyhawk II works with this drone? Or could anyone recommend me a cheap but decent controller and goggles for this freestyle drone
They have setup that FC right on the limit of what you could actually fly, the CPU load is at 44%! Unless you lower the loops and dshot cycles, using JESC bi-directional would probably melt that CPU lol
It's because they heat up when plugged in to the pc for too long which they always are when doing these reviews. It sends the values up. Set it at 4k and I'm sure it could easily handle it with the airflow
BG: bit.ly/3bTtOaG coupon BGTHSTYLE 10% 30 LIMIT
RDQ: bit.ly/2XkJNJB
All BG Coupons: bit.ly/2O6f5Pt
How do you install a xt-30 connected?
You need to unsolder the current battery leads and then solder on an xt30 pigtail
Did you bind in d8? Seems like you are getting alot more range than i am
question: i currently own tinkhawk 2 that came with the goggles and transmitter. if i buy the tiny hawk freestyle version will i be able to use the goggles and transmitter?
@@protoolsfanatic7276 yep.
Great to know that Emax is listening. I have almost 100 dollars in my Freestyle and its good to know that if it all goes down I can almost get the same result again just by going out and getting the new version.
Joshua Sterling dude same.
Buzzing I just got mine in the air. I cant wait to get flying again after giving up on my old quads. I bought this and with in 30mins in flying. So so happy.
Thank you Andy, this answers why I wasn't getting better range yesterday. Only used smart audio to change power, didn't realise it resets every flight. Once again you save me time and frustration, I can go enjoy instead of testing and reading manuals. THANKS
I upgraded the VTX in my first one and put a runcam nano in with a 3D printed part, flew great but receiver was still crap and a failsafe resulted in a crash which killed the FC. Problem is a replacement FC costs almost as much as I paid for it in the first place.
Thanks for the good content! Might be a dumb question but I’m so new to this. How can I unlock and adjust it from 25 to 200 MW VTx ? Thanks for any info 🙏🏽
Andy you are the best RC RUclipsr hands down. The only one that shows the betaflight stuff and all the changes you made. Always consistent unbiased reviews. I appreciate your hard work
Thank you I do.my best :-)
I was and still am perfectly happy with my Freestyle 1. HOWEVER, when I got my Race, the inferior quality picture from the original Freestyle camera became more obvious, so I bought the newer camera and made some 3D printed post mounts for it. Doing it this way also allowed me choice of the lens, 1.8 or 2.1 to best suit me. I have not found any issues with the VTX from the Mk1, maybe because if I want more range I'll want to be flying something bigger from my collection anyway. I'm glad they have made this change for new users, and its great they listen, EMAx do seem currently to be ahead of many in the way they bother to test and set up, and to take advantage of new items, but its an easy mod for those with a Mk1. Good review as always Andy.
Thanks mate for sending me the link for your review of the Freestyle 2 when I commented on the one you did for the original. Feel rather pleased with myself as I changed very little too but the RX loss was one of them. I'll definitely have to re-watch and find that button for the vtx, shame you gotta do it every time! Got to be a way around that! Pain in the butt plugging those batteries in in the first place. I did not notice the two profiles, I will have to check that out. Thanks again! Oh, that was some great flying too! Cheers!
You only have to do it once. I didn't say you have to do it each time. Cheers
@@AndyRCchannel Could u explain a little bit more what do you mean with "press the button when u put the lipos in" like do u mean the reboot button? Wouldnt make sens to me. Didnt know is just show 200 mw but is still 25.
I have a variety of emax quads, and this is hands down my favorite. 7-8 min flights and awesome control. I love the thing.
@Jet Brooks yeah, about 7min cruising and 4min hard freestyle
I'm getting 4 minutes?
Like the aircraft but mine "exploded" after only a few flights during a normal Bettafilght Air Mode landing. Somewhat bumpy landing but not at all unsual. The SUPPORTS are made from NYLON and stripped out. Pieces and screws went every which way. I'm replacing them with METAL. Lost one of the camera supports during the incident. 3D Printing another one. Having to design it myself. Unable to find one online. Can't wait to get it back in the air. Really performs. Hopefully it will hold up this time after fixing the DESIGN FLAW. 2s is about as big as you want to go on this class aircraft. Have a couple 3s in this size, too awkward.
This minicopter is very good for beginning. 👍
Seeing you fly the quad LOS like that is mental. I'd for sure smash it into the ground!
I was able to achieve 10 minutes of hovering on the original 1s emax batteries. Can’t wait to see how long it will last outdoors with my 550 mah 1s batteries. Can’t test it out yet as unfortunately i have a weather problem here aswell 😊
Just got my TH2FS a few days ago, and i've been trying to tune out mid throttle oscillations out for the past few hours. I wasn't sure what it was but I noticed the PID values for my Profile 2 were completely different than the ones you had on screen. I copied them to PID profile 3 and reverted my filtering to defaults, hopefully I can shake these oscillations before my 360GO and mount show up this week.
I just got a freestyle 2 from your link. Can you post a custom tune cli dump? That would be great!
Brilliant Andy what's the best solution for mounting a insta360 GO on TinyHawk Freestyle 2.
I looked at the PID profiles on mine but, I guess I missed the throttle limit. That would probably explain the voltage sag that I was getting on profile 1. I'll still be swapping to XT30 though. I really don't like the 2x 1S battery setup. They at least stay in place if you use a bit of Ummagrip though. Nice review, as always.
What type of remote controller and fpv goggles were you using?
Nice little quad, and no silly ducts..lol...The video link was particularly impressive, linear sleeve dipoles rule...🤔🤔👍👍😳😳😎
Thanks Andy. Great review as always. Ordered mine and a linear patch antenna to make the most of that 200mW VTX!!!
How this one compares to TH2 Race and what are pros/cons when choosing between the two?
im assuming to switch the vtx to 200mw, you only have to press the button once when you first plug in the batteries and then it is saved and you dont have to press it anymore, just wondering
great review, was wondering about the voltage sag
I don't think you need to change the freestyle profile to rate 2 for 2S batteries (I think that was only for the tinyhawk2, not the freestyle). That's why they don't include the 1S adaptor plug (they figure everyone will fly the freestyle on 2S, so it comes configured for 2S out the box). I fly mine on rate1 profile and haven't had issues. You are better of switching out for X30 connectors and buying better LiPo's anyway.
hi there, really appreciate your work, any advice for the batteries? 450 v 520 (550) , hv or not? :)
Hi, thank you for the review! I´d like to ask, if is it possible to use transmitter and goggles from the old Tinyhawk (1)? (I mean that first one 75mm whoop style with white plastic cover) Because the look totaly similar.
Thank you!
Looks more of a refresh than a new version... Should have kept that "II" moniker for something better.
Sadly this has nothing on a fully upgraded Freestyle with the R9, Baby Ratel and TBS Nano 32.
Hi sir.. im new to all this is there anyway u could do a video on the tinyhawk II Freestyle drone and speedy bee set up and how to set up and bind a betafpv lite radio transmitter 2 and the any tips plz and ty much sir or if u know of any good links
Can you use the controller from the Tinyhawk 2 whoop FPV kit with the freestyle
Also important to set up VTX smart audio in the ports tab by enabling tramp VTX also it has been my personal experience the emax lipos suck one will puff everytime...love your videos!
First timer here. Just bought the rtf kit with this drone. It was a blast until I crashed it and broke the battery connector... So as a total noob I'm wondering if I purchase a replacement freestyle II what will I have to do to make it work with the controller and goggles from my kit?
I'm sure you figured it out by now but if not. You would just need to rebind. That said I'm sure you've out grown the controller that came with the rtf kit as have switched to a better one.
Hi, I'm waiting for my freestyle 2 to arrive..... Was that flight footage from 25 or 200?
200 mW...R:4:200 -> Raceband 4 and 200 mW
Wow this has put all doubts out of my mind that the drone might not be fast enough for outdoor use!
Andy, what is the mounting hole dimensions for the ESC board? Looks like a standard whoop size one way, and a bit longer the other way. Looks like a possible great AIO for a super lightweight Toothpick 3 inch build.
Fantastic flying, Andy!!! 😃
Looks like an awesome little quad! Great review!!!
Stay safe there! 🖖😊
Does anyone know if you have to unlock the VTX with every battery? Or is it just once and you're done? If the former, that would get pretty annoying right?
Makes it a much better quad - I dis mine with nano2, xm+ and rush mini tank three month back :)
When I ordered the tinyhawk 1 last year it was stoped at customs, I have ordered this one so fingers crossed this time because I really what one of these
You in the UK? They also took my larva X :(
@@kjj8770 yes uk, I think it was because of the batteries. ps my larva x was sent to me faulty by banggood and I did not get a full refund just some points. last year was a bad year for me. this year not looking good as well lol.
Mine just arrived, DAYUM ITS FAST (i went from the induxtrix fpv to this)
What are the most powerfull batteries it can jse on the deafpult wires
Would it be possible to add a better fpv antenna? Something circularly polarized?I can't think of the name of the plug type, um something?
Hey dude,
Loving the videos. I've got experience in RC. But new to the FPV world.
At the moment I'm weighting up my beginner set up. I was looking at the nazgul evoque.
Im not sure whether to go analogue or digital (DJI setup - with DJI goggles)
I dont really want to buy multiple goggles, trying to keep costs down.
Any thoughts? what do you suggest?
go digital if you can afford it. you can add an analogue module to the dji goggles. look up digi adapter
Hi Andy going to add XT30 can I do it straight or will it need a capacitor ... new to the hobbie loving your Chanel 👍
Hey Andy, quick question. If I unlock the VTX after I turn on the quad. Would I need to turn it on again after I've done my flight and a put a new battery in?
EMAX Tinyhawk II Freestyle or Geelang WASP 85X ? hiw do you think ? wich really better ?
Great video and beautiful little quad but wish it came with a few more props
hi Andy can i use spektrum dx6i on the TinyHawk Drone
Thanks for the review! If i set the trottle limit to 100%, will it get damaged?
Hey, I was wondering how did you make the antenna stand up on the tinyhawk freestyle 1. I want to do the same for my tinyhawk 2 freestyle. Did you add a antenna tube ? Looked like you used a zip tie and heat shrink only.
curious about this as well?
Ordered mine earlier today. Excellent review & flight Andy!!
Which one would you recommend between the to yhawk II freestyle and the geprc phantom 3' ??? I d really appreciate your opinion about.
Hey Andy, thanks for the video! What do you think is the top speed on this one?
Whaou 🤗stock spi rx for this flight?
Hi. Im a newb but a quick vid on bind and tx setup would be appreaciated please. I have a simple flysky fsi6x tx. Thnx in advance
such a great video andy can't wait until we have a digital system on these micros thanks so much
Andy I have the original tinyhawk rtf bundle will my contoller bind to the freestyle 2 or do I need to buy a new one? Thanks in advance.
Did you use the google/radio that came with the bundle? or did you use different once ?
Great review as always, if I had to choose between the TinkHawk II Freestyle or the GEPRC Phantom, what would be the best choice?
for a felld like mine id go for the freestyle. It's got a longer flight time than the phantom. But if I needed more Range then the phantom has a full range receiver so which ever one of those is more important to you
@@AndyRCchannel Thanks for the reply, much appreciated. Putting the range aside and the flight times does one perform and fly better than the other?
They are both totally locked. Would be hard to choose
Hi Andy, Which do you recommend for a beginner the freestyle 2 or the race 2?
so you can increase the battery size? im looking to increase flight times
Loved the first one, this one looks to be even better. Now just need some European vendors to have it in stock, cause anything from banggood is taking ages currently.
this one came from banggood no problems i guess its what they have in stock
I was close, I thought they do a 3" toothpick.
give it time ;)
Do you have to unlock the vtx every flight?
Hey Andy i hope this isn't rude to ask but could you turn on the Throttle Meter for these Reviews ? I personally would like to see what you're doing on the throttle :) No worries if that's not something you want to do.
Great video, are you going to review the eachine lal 3
I was asked to some time ago but it hasn't turned up so far
LOVE all your videos but please... what in the WORLD is "Jallow?"
Thanks so much for this video. I now have my TinyHawk Freestyle 2 and I am wondering do I have to unlock the vtx once? Or every single time I power it up to fly it? Dumb question I suppose, but I am wondering how long that vtx button will last if every single time I power up I have to push that button to unlock the higher frequency.
Have you ever gotten an answer on this? Was wondering the same thing.
@@brendenaddison344 no, I never got an answer... so I have been pushing the button every time I hook in the second battery....
at what volts do you land to charge the batteries
Hello... I have an frsky aio Board with an spi receiver and cannot get the rssi to Read correctly... Any sugestions? Thanks
My next drone I hope
hi Andy, great video. With the rate profiles I have been flying on profile 1 with 2 x 1s batteries.. are you saying i should switch to profile 2 in this case to avoid voltage sag?
cheers and thank you
its difficult to say as some people are advising they have changed the profiles since my review. Which ever has a 75 percent cut on the throttle should be for 2s otherwise the voltage will sag too much without that.
@@AndyRCchannel Hey Andy :) Will flying without the Throttle limit decrease the life of my batteries or is it just better for a more linear battery performance ?
I have bought every Tinyhawk since the original and will be getting a Babyhawk r pro soonish. My Tinyhawk Freestyle I upgraded The VTX, Camera, lipo connector and frame. It’s freaking fast I love it... My maiden flight with it is the newest video on MY CHANNEL BranMan FPV. About time they did it if you ask me the original Tinyhawk Freestyle should have had these upgrades already.. The only upgrade was a frame and the motors? What’s up Emax?
no need to buy the new one sounds like you upgraded all the things they did :)
Hi Andy! Im new to this, Ive got Walkera Devo 10 with deviation and 3 in 1 protocol, will I be able to bind this to it?
Great video buddy... That thing looks slick.
how far do u think it can be flown? with like an spiral antenna 6 roll?
Thanks, ordered. Seems like a good way to get into FPV acro without spending too much and putting anything/anyone at risk. Will this work with the Teranis X9 lite out of the box?
only if you have a d8 module or a multimodule for it. otherwise you will need to add another receiver
@@AndyRCchannel thanks for the reply, just watched the dronecamps rc review and he mentioned d16 so was hopeful. I have the controller for the tinyhawk 1 rtf kit so assume i will be able to use that to start with?
Metootube82 should be able to if u can get it in binding mode
Metootube82 multimodules are like $25 and can control like everything tho so not a bad investment
Hi, I just brought a Tinyhawk2 and my son in Bataflight after doing a Backup, perform a reset, and even after a restore the drone is like dead no more everything, do you have any idea what can I do to put it back to work? I will really appreciate it. Thanks
Should motors/props spin up after arming? Thanks
they should yes unless you have turtle mode accidentally enabled
Thank you Andy, just brilliant stuff :)
Hey Andy I’m looking for a quad as a step up from my tinyhawk 2 freestyle and was wondering what toothpick you would recommend. I’m considering the geprc phantom - is it noticeably more powerful? What toothpick would you recommend as an upgrade? Thanks!!!
No a toothpick very similar to this a step up would be something like the Diatone 349 or 369
I'm the beginner, does it work with taranis x9d lite? Or I need to buy xjt module?
Great ! Great !! Great Chanel !!!
Thank you for ALL of your reviews!
I order one !!!
Is it BNF or I gotta go on betaflight when I first get it?
What goggles do you need for this drone?
Good vid, just what I needed
do you have a good pid tune for this quad? mine seems shakey and weird i dont know how to fix
How does this compare to the TinyHawk 2 Race?
Do you have to unlock vtx everytime or just once?
Awesome kwad bro😁
Does this have a mic? Can you hear it through DVR and FPV?
I have the rtf version , I unlocked the the vtx and turned it up to 200, and I’m sure it’s unlocked because I’m able to get the locked channels. But I still get a lot of breakup even on different channels . Is it the goggles ? And what can I do .
The goggles you get with the RTF kit are pretty bad, to put it lightly. The linear antennas that come with it are basically the bottom of the barrel in terms of quality. If you get a pair of Eachine EV800D's or FarShark Scouts you'll be much happier. The FatSharks have a higher picture resolution but the EV800D's have a bit better range based on some tests posted on RUclips. It's worth mentioning the FatSharks are twice the price.
Will the aio board fit in the 1st freestyle?
I've had 3 puff what should I do?
Hey Andy! Can you tell me if my goggles and controller of my tinyhawk II works with this drone? Or could anyone recommend me a cheap but decent controller and goggles for this freestyle drone
Do you have to unlock the vtx every time?
How come my original freestyle can't go 3 meters with out loosing signal at 25mw, Yet the freestyle 2 can go a fair distance on 25mw no problems ?
Andy wins the review on youtube first reward!
there is an embargo so we have to schedule the videos at the same time. Not a marketing guy myself but thats what they do
They have setup that FC right on the limit of what you could actually fly, the CPU load is at 44%! Unless you lower the loops and dshot cycles, using JESC bi-directional would probably melt that CPU lol
It's because they heat up when plugged in to the pc for too long which they always are when doing these reviews. It sends the values up. Set it at 4k and I'm sure it could easily handle it with the airflow
Thanks Andy! Great video as always dude!
Will you have to hold the button to get 200mw everytime you put a battery in?? or is that a one time thing?
No just one. Doing so again relocks it