Gatekeeper?! Lawnmower man?! DAMN!!! I've been all RX since about 2001, but I remember hearing you guys walk all over the local central PA area (Harrisburg, Hershey, Lancaster...) IDK HOW I came across this video man, but it is GREAT! I have two Fatboys, haven't installed them yet. I think one is 150 and the other is 250... but anyway, I subscribed and can't wait to poke around your feed. Used to go by Perry Mason back in the day, but I'm not OTR so likely a nobody out there. (Except Ireland, France, Spain, the UAE, Bahamas, Texas, Alaska.... I've had confirmed reach that far but not often.) Actually going for my FCC General hopefully this summer... Nice to hear something else from you on the interwebben!
Niiiiiiiiiiiiiiice man GLAD TO HAVE YOU on the channel man.... yes make sure to go check out my Playlist to help you navigate your way around the channel. I my self are working on getting back on the air my self I haven't been on in a bit..just on the bench and congrats on your general bud! I'm thinking of doing a study course 🤔 to help cb ops get into ham I think that would be cool.
Never had issue wrapping coax around the combiner or putting them both in the back. Sometimes certain builds strangest things can cause it when all stars align. Why I always test dummy load and out door dummy "LOL" before I ship now days.
I know how you feel man.... at this age I'm trying to make every day count cause man I hate the day I have to say 50 something and I rem saying that when I was 30 of having to say 40 something.
Indeed I thought it was the capacitive issue like you shared with me but it turned out to be that dang splitter man....just needed to be rebuilt! Crazy something so simple.
That a lot of work. too bad that tunning cap came un done in shipping. that what damaged the transistors.. I had a few come threw that made me pull my hair out. had a 8 pill come threw years ago. was making almost normal power but the person receiving says sounds like on SSB . distorted. turn the drive way down and it sounds better . went threw tunning splitters/combiners. nothing heating up /un balanced. pulled a transistor ,it was low HFE like 10 . pulled the rest all low but like 8 to 15 HFE. none where leaky. put in new set of RFP 2879. re tuned to them and amp was slamming with swing. it sounded great. the old ones wear DEI ones. what made me thing tunning was near normal power but just did not have the up swing. the box was working fine . and one day it sounded bad. I did have 1 outher DEI box fail like that. but that one had back swing. and combiner heating up. and transistors tested low and leaky on bad side. usually that just smoke a 10 ohm . busy playing with 2 hot water tanks today . fixed 1 replaced the outher. never know what the next day brings . 73's
I had a car that I was trying to diagnose for random electrical problems. Turned out the dash ground had worked loose. I spent two days chasing my tail and just happened to see a few threads sticking out. Felt stupid.
Nice work as always but grey hairs is wisdom stress is pure silver hair like mine 🤣 But I only tinker thanks to you and others I'm learning more but at my age the ability to hold a soldering iron steady enough to not burn everything around is gone 😥
I feel for you brother they need to make gyro for guys like you yo keep that iron steady cause I've heard this from many guys I've spoke to...maybe that could be an invention for someone.
Gatekeeper?! Lawnmower man?! DAMN!!! I've been all RX since about 2001, but I remember hearing you guys walk all over the local central PA area (Harrisburg, Hershey, Lancaster...) IDK HOW I came across this video man, but it is GREAT! I have two Fatboys, haven't installed them yet. I think one is 150 and the other is 250... but anyway, I subscribed and can't wait to poke around your feed. Used to go by Perry Mason back in the day, but I'm not OTR so likely a nobody out there. (Except Ireland, France, Spain, the UAE, Bahamas, Texas, Alaska.... I've had confirmed reach that far but not often.) Actually going for my FCC General hopefully this summer... Nice to hear something else from you on the interwebben!
Niiiiiiiiiiiiiiice man GLAD TO HAVE YOU on the channel man.... yes make sure to go check out my Playlist to help you navigate your way around the channel. I my self are working on getting back on the air my self I haven't been on in a bit..just on the bench and congrats on your general bud! I'm thinking of doing a study course 🤔 to help cb ops get into ham I think that would be cool.
Good troubleshooting experience, well done 👏
Never had issue wrapping coax around the combiner or putting them both in the back. Sometimes certain builds strangest things can cause it when all stars align. Why I always test dummy load and out door dummy "LOL" before I ship now days.
Lol I like how you said your out door dummy load 🤣 lol that called a dang good tuned RF Radiator other wise an antenna lol
@15:47 I kept missing the crux of the fault. Here it is.
I’m pushing 40 brother, those grey hairs represent wisdom.😂☑️
Only 40 😮. Iam nearly 50 bro and have a ton of grey hair and a beard. 😂😂
@@worldradio456uk5 I’m trying to keep my youth for as long as possible. 😂
Your the wisest UK brother i know then man!! Lol
Yep in trying to keep telling my self that lol 😆
I know how you feel man.... at this age I'm trying to make every day count cause man I hate the day I have to say 50 something and I rem saying that when I was 30 of having to say 40 something.
You still gotta wire up the bird peak kit for the a/c transformer plug then you won’t need to buy batteries again
Agreed man agreed
Glad its working now bud... Sometimes these things can make you crazy.... Been there got several T-shirts..
Indeed I thought it was the capacitive issue like you shared with me but it turned out to be that dang splitter man....just needed to be rebuilt! Crazy something so simple.
Sometimes its silly thing and usually the last thing you try..@@1883GotDown
That a lot of work. too bad that tunning cap came un done in shipping. that what damaged the transistors.. I had a few come threw that made me pull my hair out. had a 8 pill come threw years ago. was making almost normal power but the person receiving says sounds like on SSB . distorted. turn the drive way down and it sounds better . went threw tunning splitters/combiners. nothing heating up /un balanced. pulled a transistor ,it was low HFE like 10 . pulled the rest all low but like 8 to 15 HFE. none where leaky. put in new set of RFP 2879. re tuned to them and amp was slamming with swing. it sounded great. the old ones wear DEI ones. what made me thing tunning was near normal power but just did not have the up swing. the box was working fine . and one day it sounded bad. I did have 1 outher DEI box fail like that. but that one had back swing. and combiner heating up. and transistors tested low and leaky on bad side. usually that just smoke a 10 ohm . busy playing with 2 hot water tanks today . fixed 1 replaced the outher. never know what the next day brings . 73's
Your a multi fasted type of guy i see they must call you Mr. Fix a little of everything around your parts lol 😆
Looks like one of the resistors in the combiner is turning brown.
Prbly just lighting cause they were just out on there before the video 📹 sometimes the lighting will look like that in pictures lol.
I had a car that I was trying to diagnose for random electrical problems. Turned out the dash ground had worked loose. I spent two days chasing my tail and just happened to see a few threads sticking out. Felt stupid.
Shoot your lucky to have found that buddy.
Nice work as always but grey hairs is wisdom stress is pure silver hair like mine 🤣 But I only tinker thanks to you and others I'm learning more but at my age the ability to hold a soldering iron steady enough to not burn everything around is gone 😥
I feel for you brother they need to make gyro for guys like you yo keep that iron steady cause I've heard this from many guys I've spoke to...maybe that could be an invention for someone.
Love that video. We feel your pain.
Lol thanks and i know you do brother I know you do by watching how much you 2 play around with bigger builds.
I'm waiting, to hear, that Armadillo on the air!!!
It will be one day man!! One day!
@@1883GotDown 🤔🤔🤔🤔🤔🤔,been hearing that 3 + now 😂😂😂😂😂😂
I've been finding HG-2879's don't like the 5/8 core transformers
What length 1/2" transformers do you use for output?
@@MangohickMotorsports 1.5 x1/2
61 ferrite forgot to add that lol
Well..... they either do or they dont...you'll hear me say that alot when dealing with HGs lol.
Yep gotta love the 61
The 16 pill of SATAN!
I rebuked this 16 pill man lol....lol
All that problem because of a missing .000004cent piece of tape
Well no the actual brass tuner came off the board meaning it broke away from the solder from the bond to the board.
I could feel your stress Gatekeeper...LOL, but great troubleshooting ! Billy....Albq. N.M. 9/23/2024
🎙️🎙️🎙️
Thanks for stopping by bud!
BlackSheep gone
Waaaaaaaaaaaaaaaving!
You talk to much, just fix it.
Lol lol I agree...I think a lot of us radio ops are plagued with this issue 🤔 lol thanks for stopping by the channel!
All Bull Shit!!!!!!!!+
BULL SHIT
This talker will skin your wallet!! He's about getting over on others