👉Amazon Fire tablet does not turn on, charge, Drained dead battery
HTML-код
- Опубликовано: 1 июн 2021
- Here we will fix very easy an amazon fire that won't charge because battery was totally drained.. This fire does not charge or turns on, Using an old usb cable we will bring it back to life.
Did I helped you?
Buy me a coffee: www.buymeacoffee.com/tecnowiki - Наука
Thank you for this. It's been 3 years since our Kindle worked and I was quoted £45 today by a repair shop to look at it. Following your tutorial I have been able to resurrect it within 2 hours.
My tablet hadn't worked since 2019 and my husband was able to get it working thanks to your video . THANK YOU SOOOOOOOOO MUCH!!!!!
Glad it helped :D
My table that hadn't opened since 2017. I think that's death, but when I see your video tips it's again working. 🙂 Thank you so much.......... many many thanks....
THANK YOU SO MUCH!!! I BOUGHT THIS TABLET AT A THRIFT STORE for $4 AND IT WASN'T CHARGING
Hehehe!!! You got a a great price!!!!! Good to know my video helped you!!!
My table that hadn't opened since 2017. I think that's death, but when I see your video tips it's again working. 🙂 Thank you so much.......... many many thanks....
Tremendous video! Clear and simple. Thanks so much!
You're very welcome!
This worked for me!!! I am so impressed! Thank you soooooo much!!!
Thank you thank you thank you!!! Great video and great instructions. 100%
Glad it helped!
Good idea think you
Hi, using your method on hd fire 10 battery shows 4.19 but with battery disconnected and unit connected to charging cord only get .02 at battery connection point. So battery good charging system bad? Any ideas if so? Thanks much. Unit is only a year old but has been used and recharged alot.
Yes, charging port is now working ok but battery is good and working.
So, you’re telling me that I can do this for my Fire 7 too bcuz I have the same problem
Yes, is the same!!!
Bhi sab kitne price ha banwane ki mera tab charge nahi ho rha or chal bi nahi rha bantery bi khatam thi
Is it enough to just charge one of the cable pairs? I have seen in the video that you only take one + and one - cable
yes, is enought because all them go to the same place
my kids amazon tablet stays at 2% or sometimes 9% while on charger. what would i need to do? its not the charger or cable
Hi there .. just a quick question before i blow stuff up .. is there a time limit to which i have those to wires conected straight to the battery? Like is it a good idea to leave it to charge like that over night?
❤❤❤❤❤❤
no problem with the time, it could be 3 hours or overnight.
DONT DO IT
Cool please add another video
Genius :)
Hey when I check voltage at female connection, voltage from the charging port, I'm only getting 0.8 on those outer pins. What does this mean?
Hi gooday it mean that the tablets charging port is bad what model Amazon tablet do u have
Hi my battery is at 3v but won't go any further what else can I do please let me know. I have tried your method but no luck. Please let me know. Kind regards.
Is not normal that if you jump start it it dont get more than 3v, in this case I would use a multimeter and check before the battery bms... below the black or yellow tape, and check the cell voltage, if it is below 3v I would charge it 20 minutes directly NO MORE, check voltage and repeat if needed until it reaches the minimum of 3.7 or 3.85 volts.
Hi mate I was certain this would work but I've now noticed when testing with the charger in (switch charger that is) I'm only getting 0.8 at the battery connector?Any ideas whats going on and how can I do more tests. Cheers.
0.8 from battery is not rare, connect the usb cable directly 1 hour and you may get more than 3.7v and battery will be recognized by the tablet
my kids amazon tablet stays at 2% or sometimes 9% while on charger. what would i need to do? its not the charger or cable
My tablet keeps factory rest what is the problem
Bro can we buy new battery and what is the name or size of this batterie can link it from amzon shopping i will be very thankful to u
wich model do you have? the battery model is different in different models of tablets.
Don't have a voltmeter, maybe I should take it to a tech store?
You dont´really need a volt meter... you just need to do what I do in the video and let it charge 1 hour, and test it should be ok ;)
HI i have 3.81 v on my reader but my tablet still wont turn on
I jumped my battery and now I’m at 3.804 but I’m still losing charge slowly, why!!!
charge up to 4.1v
So the charging port is bad if you charged the battery separately from phone
no, charging port was working ok but the battery was totally dead, tablet can not charge a totally discharged battery so you need to charge it directly, then connect it and the tablet will charge it normally.
@@2TECH thanks alot
Mine was at 3.7 volts. I charged it as you showed. It was then at 4.3 volts. Still will not show any sign of life.
is strange, no sound when you push power button?
@@2TECH No sound. No sign of life.
Bro u have motherboard problem.I had sake problem so I changed motherboard and it turned on
Why was the battery not charging in the first place?
Over discharged, like it was 1% and it powers off and the user turns it on again and again....
My table that hadn't opened since 2017. I think that's death, but when I see your video tips it's again working. 🙂 Thank you so much.......... many many thanks....
My table that hadn't opened since 2017. I think that's death, but when I see your video tips it's again working. 🙂 Thank you so much.......... many many thanks....