I'd like to do this, and if I was going to go through the excercise, I'd try to make a detector that can detect metal at least 12" under the ground. Would more windings with thicker gauge wire accomplish that?
though I had some problem with sea water It also ruclips.net/user/postUgkxa-FNYUOM93a388gi9a4brtSCEVmrHgJH land for finding any things very easily. (thought it would work as normal due to it being water proof within certain parts of the detector), on dry land and sand worked well. My first one, so still have lots to learn
greetings, I connected everything nicely, I use the buzzer, but when I turn it on, it sounds so quietly, it's almost not heard at all, and when I bring the metal closer, it reacts, changing the sound. How to be heard louder? The battery is good, new, any buzzer that can be put on is soundingsame...
just one question doesnt the copper wire have to be insulated if it is to be wound over ......?? or else how will it behave as an inductor.? is it possible to use insulated wires instead..??
In order to successfully use this detector, you kinda have to already know where the metal is. Simply passing the sensor over the metal won't detect it, you have to stop and hover over it a little, as you can see demonstrated in the first few seconds of the video.
I've made the circuit directly but after putting the battery the buzzer only works for a tiny fraction of a second and then doesn't work until I remove it and re introduce it to the circuit. What is the reason for this and for to fix it?
So I waved my hand over the pile of electronic parts that you required but they did not magically attach themselves to the bread board!!! Did I do something wrong? Did I move my hand too fast?
Really, really nice work, my friend! :D Just one question: the buzzer must be that kind used in motherboards, right? That you connect a battery and it doesn't beep.
No it is not a buzzer if you talk about PC motherboards, It is just a small speaker, to use it as a buzzer you must use something like NE555 or a two transistors, one PNP the other is NPN and couple of resistors and one capacitor, that's it
i made that thing myself. kinda disappointed by the depth... its barely good enough to detect wires in a wall. gonna try to change it to a coil with a larger diameter and try it again. maybe that'll help.
Oi Bom dia estava vendo seu vídeo queria saber si você pode fazer um detector pra mim é quanto você cobrar porque não sei fazer queria saber si ele também vê pedras preciosas porfavo fale pra mim preciso muito queria saber o preço si é muito caro
yes, an led instead of a buzzer should work just fine. just be carefull about the voltage and current that your led gets. you might need a resistor to protect your led maybe.
![Lethal Company Music Video 🎵 "Follow The Orders" [VERSION A]](http://i.ytimg.com/vi/QeooZB4Z7RA/mqdefault.jpg)
Thankd now i can find my metal detector
Lol
😂😂😂Legend 👌👌👌
😂😂😂😂😂😂
Lol
I'd like to do this, and if I was going to go through the excercise, I'd try to make a detector that can detect metal at least 12" under the ground. Would more windings with thicker gauge wire accomplish that?
It is going to make tesla coil
Mabye
If you make more turns in the coil, or larger diameter will it be stronger? Or thicker wire?
Super sir nivu dodda scientist 🙏🙏🙏👌🏻👌🏻👌🏻👌🏻
Pls make a video demonstrating the circuit and explaining how it functions and detects
Or else, the object could be made by anyone , couldn't it?
though I had some problem with sea water It also ruclips.net/user/postUgkxa-FNYUOM93a388gi9a4brtSCEVmrHgJH land for finding any things very easily. (thought it would work as normal due to it being water proof within certain parts of the detector), on dry land and sand worked well. My first one, so still have lots to learn
Nice wrk...But how to create a successful circuit?....How much will give to the capacitor?..Please give a answer
greetings, I connected everything nicely, I use the buzzer, but when I turn it on, it sounds so quietly, it's almost not heard at all, and when I bring the metal closer, it reacts, changing the sound. How to be heard louder? The battery is good, new, any buzzer that can be put on is soundingsame...
Maybe you need a larger buzzer for more sound. I am telling from my experience though
Which pcb did u use..shown pcb in video us plain have no connection
just one question
doesnt the copper wire have to be insulated if it is to be wound over ......??
or else how will it behave as an inductor.?
is it possible to use insulated wires instead..??
Nice!
Nice soundtrack too. Bow Chicka wow wow.............
What type of wires do I need? (Exept copper wire)
Nice
Nice
Very Good! THANK YOU!
I mad it its work I find treasure box in treasure box I find 10 thousand dollar with three iPhone xs and one camera
Thanks a lot for this thing
hi
sounds like a lot of hard working!!!!!!!!!!!!!!
Good job and I will make the detector
I'm stuck at cutting the cardboard, help.
Luarrr biasa bos...
In order to successfully use this detector, you kinda have to already know where the metal is. Simply passing the sensor over the metal won't detect it, you have to stop and hover over it a little, as you can see demonstrated in the first few seconds of the video.
I m not connected pcb board
Can i post the link for synopsis of this project
Capacitor 10uf/25v
Capacitor 2.2uf/50v
Is it necessary to take 0.2mm wire
Can I use another size of copper? For example 1 mm ?
I've made the circuit directly but after putting the battery the buzzer only works for a tiny fraction of a second and then doesn't work until I remove it and re introduce it to the circuit. What is the reason for this and for to fix it?
So I waved my hand over the pile of electronic parts that you required but they did not magically attach themselves to the bread board!!! Did I do something wrong? Did I move my hand too fast?
Wow you make your own Merit at your desk so cool I want to make my owner
So beautiful
Good video bro
👏👏👏💖💖💖💖😊😊☺☺☺☺
Wow nice
Masllah birsantim.den
Gösteriyor mükemmel
Telmeli
Can it detect gold jewellery? Please answer
Very nice
Pretty cool huh
nice detector
Nice work! But how deep can it detect?
Sucess may Friends 👍🏼👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Good
I also make videos like it.
How deep can this device detect? Can it detect under the ground?
Sir
Please send the circuit diagram and block diagram of this ...
Or attach a link to collect data about this project
muy bueno LO voy a hacer
Idee geniale
Really, really nice work, my friend! :D Just one question: the buzzer must be that kind used in motherboards, right? That you connect a battery and it doesn't beep.
there is on/off switch on PCB, when i connect battery at that time it was in off position, so it doesn't beep.
MC's Creations yes.
No it is not a buzzer if you talk about PC motherboards, It is just a small speaker, to use it as a buzzer you must use something like NE555 or a two transistors, one PNP the other is NPN and couple of resistors and one capacitor, that's it
Square wave.... Sound
Good job !!
What is the maximum depth that this can search for?
Sir I want the link of 2ų2 F capacitor
Bro ethinde gauge of wire ethrayaa??? Pls tell me Bro
Bhai ye kitni duri tak find kr sakta h
when I want to detect deep of 1 metre and more , what should i do !? please answer , 😬
Buy one
What is the thing that you had put upon soldered wires and burned using lighter. Where will i get it?
its a heat shrink tube
Out of curiosity just how well does this metal detector work before I go to the trouble and how much cost is involved
Genial!!
Merci,mon heros👏
i made that thing myself. kinda disappointed by the depth... its barely good enough to detect wires in a wall. gonna try to change it to a coil with a larger diameter and try it again. maybe that'll help.
Awesome
How it's awesome he doesn't show how to make circuit it's not awesome
will it detect things that are underground
cool now u build one for me 🤣🤣🤣
Key was detected ...in same way. Copper wire will be detect or not.???
Wonderful work
Good creative, please share, how to make fish detectoor..
Copper wire is necessary???
Sir what is this 2u2 F capacitor
Can you please tell me how connections were made on circuit
Is it compulsory We have To Do 300 Turns
Which ic did you used
thank you
Long range bro kaya mong gumawA?
Muito eficiente e criativo
Hola ya lo as provado
brilliant
To what extent is the detection done?
In that metal coil which colour wire is positive side and which one negative
do you have the operation of the circuit for How to Make a Metal Detector at Home - Homemade
:0 that SO COOL :D hm wish I had material to do it..wow AWSOME VIDEO :D
What is the name of this machine which is use for like gumming in disc
I see you in the video detecting metal which is 0.1m deep. But i think the metal detector can detect metal which is 5m deep or more in dirt
how the detection deep?
1.5 miter Is it possible to look under the ground?
What is the range bro??
10cm
PCB wireing mai 48om register laga sakte hai Bhai and do
"At home" yea sure we gonna have those things at home
Oi Bom dia estava vendo seu vídeo queria saber si você pode fazer um detector pra mim é quanto você cobrar porque não sei fazer queria saber si ele também vê pedras preciosas porfavo fale pra mim preciso muito queria saber o preço si é muito caro
Se puede hacer con más pilas?
Smart...
Sir we did this project.....but the output is not coming.....can you tell what could be the problem.....
You are genius
I like it
Hummmm very nice is it real or fake
how could you increase the range of the detection? more power?
Ben G inductors voltages depend of the number of coil turns. Sadly, the highter the number of coil turns the higher the heat produced.
Bhaiya pcb pr connection kese kiye apne bta dijiye
Can power be increased
Funciona bajo tierra?
HOw deep it can detect?
Work to gold ?
Can it detect gold
You are ammmmmaaaazziinnnggg
From which app u use to join different videos
what are the volts of the capacitors? Thanks
good
Sir iska range kitna feet tak hain...,?
Can I search gold or metals in depth ?
Will he reveal me in the depths of the earth?
Can we use an led instead of a buzzer?
yes but you must use a resistor in serial with that led, the formula is: (9-3)/0.02 =? do the math :)
عبد القادر بن محمّد بن عبد القادر thank you
yes, an led instead of a buzzer should work just fine. just be carefull about the voltage and current that your led gets. you might need a resistor to protect your led maybe.
Yes
@@Triangleguy713 lol