How To Make A 3 Switch Nerf RapidStrike Loom
HTML-код
- Опубликовано: 11 сен 2024
- THANKS FOR WATCHING!
In this tutorial, I am going to show you how to make a 3 switch Rapidstrike Loom
This is quite a hard mod if this is your first time so watch this video a few times, but don’t be scared because of it so worth it and Have fun guys.
Wiring diagram: drive.google.c...
Parts:
Micro switch x3 & Lipo Connecters: www.blastertech...
18AWG Wire
Tools:
Solder
Soldering iron
Hot glue gun + hot glue
Snips and strippers
Screwdriver
Like my content? Subscribe! / @cobbabuilds
Or follow me on my social media:
Facebook: / cobbascustomnerf
Instagram: www.instagram....
Music:
Velasco - Cloud 9
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video Part 2!](http://i.ytimg.com/vi/JpT5Voak6WA/mqdefault.jpg)
I have found a mistake in this. I did a full analysis of this and compared it to the wiring diagram you have linked. At 9:42 you made an error. You state that you run a wire from the NC of the trigger switch to the pusher motor. The wiring diagram states that you run it from the common to the pusher motor. I have not tested it yet butI found that error and I think its the reason why so many people are having issues where the rev trigger accelerates the pusher and the control switch is what controls it. Just a thought until I can get around testing it.
naphen cheers for pointing it out, ill pin this so people will know. Again this shows you pretty much how to solder, use the diagram for a proper layout.
Ah ok 👌🏿 Hopefully this will be able to help people in the future. Thank you for the tutorial by the way.
It still does it. At this point I have no idea. Gonna go over it tomorrow.
I have no idea what I am doing wrong, Ive combed the diagram and compared it to your video and I don't see anything besides that. I can't follow the diagram because everythings a tangled mess
So whitch one is right The video or the diagram?
Thanks man I’ve been trying to build a rapid strike for ever but a lot of the other wiring guides were not as clear thanks for the very helpful guide!
Worked well for me. Got turned around at one point but the wiring diagram link sorted me out. Used a wedge piece of lego trimmed down for the pusher switch. Only 2S Lipo but it's running three meishel 2.0's so it's beastly.
This is quite useful. Also, I noticed you like Subaru and Saleen. Good choices.
Your videos are great man. I've actually been using your guides more than the others on youtube. I did notice that slight error in this video, but thats what the diagram's for. Truly appreciate the time and effort you put in. Keep up the awesone work!
This is my first flywheel mod, and yes it was hard, but not as hard as I thought it would be. I have 3 meishel 2.0 motors, 18 gauge wire, and a 2s Lipo connector, these were easy to install. The only difficult thing to install were the switches because mine had 2 leads on one side, and one sticking up sideways on another side if you know what I mean. Took me 5 hours to fit them in and wasn't working correctly at first, but after fixing the pusher cut-out switch so it could be turned on/off by the pusher, and adding the diode it works fine. Might remove the diode to see if I actually needed it. But I got 8 rounds per second very easily, not too fast, not too slow, works for me.
finally.now im able to understand
awesome! this helped a lot with my rapidstrike
Why does my rp look different? It has an orange stock
@@corrupt4148 kinda like the grey better
Nice one Cobba
Somethings up wth mine. I used BSUKS kit, and for some reason my rev trigger powers the pusher and when the pusher control is depressed then the pusher shuts up. My main trigger doesn’t seem to have an effect. Any ideas?
Man just saved me after I lost my return switch button piece
Confused to why you mention a diode in the trigger cluster?
He didn't put one in but that is the place to install one to keep the voltage to the flywheels the same as the battery can provide and lower the pusher voltage for a lower rate of fire, second reason that wire is there is to stop the pusher being powered without the flywheels powered.
Nice guide!
Is the switch set up to depress when the pusher is out?
Didn’t work properly for me. Issue with the pusher continuing pushing while the trigger is depressed and rev switch is pressed. Plus the diagram doesn’t match exactly to what he’s doing. The wiring from the trigger switch, to the pusher motor, to the pusher switch is not the exactly the same. I figure that maybe my issue. I’ll jus use mtb’s tutorial.
don't its a 2 switch and it will not preform as well. I have the same issue but I followed the wiring diagram instead and It worked.
Read my comment just recent if you haven't figured it out yet.
The diod is optional so if I'm using the new fangs do I need to use a diod? Or can I just do it whith red and black wires
Moosa Baig the motors dont affect the loom, the look tells the motors what to do. So any motors work with the set up, i always use the diode for looms though
COBBAcrazy but is it possible whith put the diod
the trigger switch doesnt do anything.... the pusher switch appears to completely bypasses it in this design. ive checked my wires over 10 times, and its the same wiring as in the video, but the only thing that effects the pusher is the pusher switch. the trigger does nothing. if you have any advice, id love to hear it.
Check the wiring diagram in the description, I have used it about 5 times and it has always worked for me
Read my comment just recent if you haven't figured it out yet.
So whitch one is right The video or the diagram?
Both
what amp switches?
Hi there, love ypur vids, can i just check, ive been looking around for the 10A switches but im unable to get it, is it possible is use a 5A?
Yes
What diodes?
Will it stlill work witout the pusher return switch
Yes, however, you may have a problem with runaway
Yes but jams will occur more often
also you got the Nc and No tabs mixed up
no he didn’t.
nc-com means when it not pressed power flows from nc-com. When button is pressed com-No words
oh I thought you meant in labeling them
Glad someone else spotted that too
Thanks
The idea is copied off of MTB
Click bait… You did not use the same switches as in the thumbnail. This information is useless to me and you just did this for the views
cap
u copied MTB
Mtb only used two switches three is superior
but its not necessary and its wasteful
Jesus, bit of a fan boy.
COBBAcrazy how's your day going
Mykel Mods Nerf yeah just working on videos mate, you ?