और सर जो आप वीडियो इतनी अच्छी तरीके से इतनी आसानी तरीके से इतनी बेहतर तरीके से समझाते हैं और बहुत अच्छी तरीके से समझ में आता है और इसीलिए मैं अपना काम चालू करना चाहता हूं
Congrats for illuminating explanation. Accordingly,Please clarify the following about motor winding of mixer grinder: 1.If resistance value between neutral wire and motor windings:speed1.2.3 *showing infinity/ OL(1)* (N-Sp1,N-Spd2, N-Spd3) Then,What is the reason for infinity value/1??,when measured between N-Sp1,N-Spd2, N-Spd3. #With series' test lamp also ,we did continuity check of the speed winding 1.2 .3 *But light NOT glowing* 2.But, Motor winding resistance values between Sp1 & spd2 winding : 5 ohms , between spd2 to spd3: 1.8 ohms between spd1 to spd3: 0.8 ohms 3. Resistance between Motor windings & motor body is infinity/1 # So Please guide us how to troubleshoot the problem *as mixer grinder NOT running at present* Note: Power supply continuity signal is OK/ Normal,from socket up to Rotary switch.
Test the windings, armature, ground, and rotary swtch, with seris lamp 200 watt. It will show dim bright and armature run while test . Mixer grinder not running means change new carbon brush, and check contact.
Sir mixy ka dono field coil jal Gaya hai.main coil ko katkar count kar Liya hai.par speed wala coil ko Kaise count kare .mujhe to pata nahi kitne turn par speed Ki tapping nikla hai.speed Wale coil ko count Karne ka tarika Kya hai.ispar detail mei vdo banaiye aur samjhaiye.
Sir mixer ka field coil series se check kiya aur maine paya ki field coil thik hai aur kahi se short bhi nahi dikha raha hai.lekin mixy chalne par garam ho jati hai aur jalne ki halat ho jata hai.iska kya karan hai .ispar vdo bana dijiye.
Apne village se start kijie aur accha se accha service dijiye. Lekin Sabse pehle sikhna jarroori hai agar sikh liye h to apne village se start kijie public dost family ko batayiye. Jisse ki aapko kam Milne me asaani ho
Bhai mera fan thik hai lekin bijli jane ke baad me jab bijli aati hai to apne aap chalne lagta hai thodi der chalne ke baad band ho jati hai table fan kya problam hai
Kaafi accha video. Sahi tarike se samazaaya. Thanks ustaad
और सर जो आप वीडियो इतनी अच्छी तरीके से इतनी आसानी तरीके से इतनी बेहतर तरीके से समझाते हैं और बहुत अच्छी तरीके से समझ में आता है और इसीलिए मैं अपना काम चालू करना चाहता हूं
धन्यवाद ।
आपका धन्यवाद. बहुत ही आसान तरकेसे बताया है.
सर आप भी अच्छे आपका काम भी अच्छा आपके वीडियो बड़े ज्ञानवर्धक होते हैं लाइक तो बनता है 👍👍👍👍👍
बहुत अच्छी तरहसे बताया भाईसाहब धन्यवाद
बहुत अच्छा लगा समझ में आया
Bahut achi vedio aap ki hai bahut kuch sikhne ko milta hai thanks sir
लजवाब तरिके से समझाते हो सर
🙏🙏
Sir aapka kaam mujhe bahut pasand hai
Thank you 🤗🥰
Interesting explanation and good video . Thank you so much.
बहुत अच्छा बता रहे हैं ।
मैंने आपका वीडियो देख देख कर ही छोटा मोटा सा काम करना चालू किया है इसीलिए आपसे पूछ रहा हूं सर प्लीज सर
Bahut Badhiya Video hai
Congrats for illuminating explanation.
Accordingly,Please clarify the following about motor winding of mixer grinder:
1.If resistance value between neutral wire and motor windings:speed1.2.3 *showing infinity/ OL(1)*
(N-Sp1,N-Spd2, N-Spd3)
Then,What is the reason for infinity value/1??,when measured between N-Sp1,N-Spd2, N-Spd3.
#With series' test lamp also ,we did continuity check of the speed winding 1.2 .3
*But light NOT glowing*
2.But, Motor winding resistance values between Sp1 & spd2 winding : 5 ohms ,
between spd2 to spd3: 1.8 ohms
between spd1 to spd3: 0.8 ohms
3. Resistance between Motor windings & motor body is infinity/1
# So Please guide us how to troubleshoot the problem *as mixer grinder NOT running at present*
Note: Power supply continuity signal is OK/ Normal,from socket up to Rotary switch.
Bahut accha sirji
Wow eshi video kisi ne nahi banai hai superrb
Kya video banaya app hamari sare parisani dur Karrie sir.
दोस्त बहुत अच्छी वीडियो है वीडियो की जितनी तारीफ करें कम है👍👍👍👍👍👌🇮🇳
DaDa khub valo video korecho . er pare dada apni ki vabe change korbo
Like kar diya, comments me kahoonga best explanation, down load bhi karr raha hoo, subs. ke liye aur kucch vdo dekhunga... Thanks
Apka video pasand ata h
मैने आपका चैनल सबस्क्राईब कर लिया है आप बहुत अच्छी व्हिडिओ बनाते हो आप बहुत आसानी से समजाते हो हमे बहुत व्हिडिओ पसंद आता है मै धन्यवाद थँक्यू
Super nice explanation
Test the windings, armature, ground, and rotary swtch, with seris lamp 200 watt. It will show dim bright and armature run while test .
Mixer grinder not running means change new carbon brush, and check contact.
Very good information
Pasnd aya apka kaam
हैल्लो सर
मिक्सर मशीन के आर्मेचर कैसे चेक करते
प्लीज़ वीडियो बनाइये
Lots of thanks
Very good sir👌👌👌
Thanks Sir.
Nice Video sir 😊😊😊😊😊😊😊😊😊
Thanku
Nice video sir
Sir motor ki shaft kse adjustment kre
Very good ! Reasons for sparking is short in winding only ?
Field winding me aluminium hai.
Or rotary winding me copper winding de sakte hain kya?
Good information sir g
Nice information
nice video
Aap mhuje jaipan mixei ka 8 tar wainding konsa tar gej raund btaye
Gadi ki wipar motar ki wainding ho jati h ya nhi sir video dal do plz
Good sir most thanks 😀
Ek taraf 4wire ur ek taraf 3wire fied winding check kaise check kare with series lamp plz reply me
Mixer grinder motor ki shabhi tarha ki size bataye please sir
Sir feld coil bana hua market me milta hai kya
sujata mixar ka video bnay
Sir eska armature rewinding karke dekha please
Thank you
I like video
Thank you sir!! Nice video!
Tamil
32 swg aluminum ke badale koper ka use kar sakte he
Thanks sir
मस्त आहे
Sir mixy ka dono field coil jal Gaya hai.main coil ko katkar count kar Liya hai.par speed wala coil ko Kaise count kare .mujhe to pata nahi kitne turn par speed Ki tapping nikla hai.speed Wale coil ko count Karne ka tarika Kya hai.ispar detail mei vdo banaiye aur samjhaiye.
सर आप जो ग्रेंडर सीलिंग फैन फराटा फैन या किसी भी चीज का वीडियो बनाते हैं तो सर उसके लास्ट में पैसे भी बता दिया करो प्लीज सर
Sir Suru se batao pura mixture kaise check kare
Nice sir
👍👌
Sir mixer ka field coil series se check kiya aur maine paya ki field coil thik hai aur kahi se short bhi nahi dikha raha hai.lekin mixy chalne par garam ho jati hai aur jalne ki halat ho jata hai.iska kya karan hai .ispar vdo bana dijiye.
SUMEET MIXXER GRINDER KA WARING KAISE KAREIN ??
Sir jee mixer grinder ka rewinding charge kitna hai aapke yaha
☺️☺️👌👌👌👌👌
Thanks
Sir ceiling fan ka coil ka wire ka polish insulation jala kar swg mapna parta he kya? Aur wire ko nahi jalaya to kya swg mein galti ho sakti he?
Iska winding data wainding ka video bana sir
Best
Thanks bro, now I got the answer, why my mixer not moving, same as the video same winding is not showing continuity.
वाशिंग मशीन के बारे में जानकारी दे
sir aarmechar me light hone aarmechar hit hone se
Sir motor ka Shaft adjustment kaise kiya jata hai?...
Plz reply
आर्मेचर का साईज सब मै एक ही होता है या अलग अलग आता है
Alag alag size ka hota hai.
@@ElectricalBeast सर आर्मेचर का साईज कौन कौन सा होता है plz
Mixer से जो armature निकलता है उसी साइज का नया अर्मैचर लगता है।
Sir Mera mixerka armeture fatgeyi hai,usko keyse repair karu or is position Mai coil short hosakti hai Kya.
Nice
good
आप मैकेनिकल इंजीनियर है क्या?
Please uska kuch photo share kijiye
लेकीन मेरा एक सवाल हे सर मैरा मिक्सर मे बिजली जादा आती हे
Sir coille cheak kese karte he
Sarji namaskaar 🙏 mere 8 taar vaale mixar ki koman taar me se chinghari nikalta he aor band ho gaya he to kaise thik kare ?
Main content start at 1:05
बॉडी शॉर्ट कैसे चेक करते है
Baya... How to check field coil in multimeter?
Sir armeture kaise check karte hei ? Ye series test lampse check hota he?
Haan hota hai
Sujata ka bataiye
Winding kaise kare ye jankari de
Motor ki aluminium body toot gyi hai kya kare
नमस्ते सर 1 मिनी कुलर मोटर मे कितना कॉपर तार लगता है
Filed ka magnet kaise check kare nhi bata ye ap bhai
Thank you sir
Mixcar civach on karnese o karke aavaz aati hai
आप का दुकान कहा है
Wipar motar kese thik karen
👍👍👍
👍
Sir Reaparig Kam Ko start kese Kiya Jay jisse jyada Kam mile
Apne village se start kijie aur accha se accha service dijiye. Lekin Sabse pehle sikhna jarroori hai agar sikh liye h to apne village se start kijie public dost family ko batayiye. Jisse ki aapko kam Milne me asaani ho
@@ElectricalBeastMai city me rahta hun yanha pahle se electrician hai kya karun
Bhai mera fan thik hai lekin bijli jane ke baad me jab bijli aati hai to apne aap chalne lagta hai thodi der chalne ke baad band ho jati hai table fan kya problam hai
Bijli aane par Switch band rehta hai phir bhi chalta h kya???
1.5 inch ka stear 28 /26 swg wiring data
Btai
25/26 se badhega, 290 turn
Speed ke liye 10 turn alag se badhega.
🙏 thanks 🙏
circuit breaker breaks as rotor runs
Sir up kaha se ho... Up offline kam sikhate hain kya....??
Kushinagar se hain
Sir up kon se state se hain??
Bhai armature ki spelling wrong hai
Muze kam karna shikna hai