Strength of Materials: Shear and Moment Diagram using Area Method (Part 2 of 2)
HTML-код
- Опубликовано: 23 ноя 2024
- PART 1 • Strength of Materials:...
Using Shear and Moment Equation • Strength of Materials:...
This video is for civil engineering students who are having a hard time understanding strength of materials.
This is a raw video and unedited due to time constraints. Please pardon me if there are some mistakes in the video. Feel free to comment down your corrections and suggestions to help me improve videos in the future. I am using mixture of Filipino and English language in this video.
Please subscribe to my channel.
About me:
I am Jay T. Cabuñas, civil engineer, master plumber, DPWH accredited materials engineer 1 and an engineering professor.
this guy totally got me back on track
Sir thank you so much po mas na gets ko pa po ng husto ang lesson tungkol sa Shear and Moment Diagram dahil po sa vid nyo na to. Thank you po talaga more power po sainyo and goodbless u more po❤
Thank you tito Jay. This is a big help towards my understanding of SFDs and BMDs
Thank you sir, makakatulog na din, tagal ko ja to gusto matutunan,ang hirap hanapin
yun pala ang pagkuha ng x at saka ng area. Thank you bro.
Welcome. Pls share and subscribe
You are absolutely a genius!
Sir, Thank you for your wonderful and informative insight po. You just saved my entire life right now. Salamat po
you simplified the distance X at V=0 better than my doctor, bravo bravo bravo.
Thank you po, Malaking tulong po ito sa akin 💗
Thanks sir. Napaka detailed ng sinabi nyo. ❤️
Pls share
Thanks you very much. You concept is easy and clear to me.
The best ka sir!
Pano po if mirrored naman po yung triangular load (decreasing naman po from left) same parin po ba ng steps?
nice lecture
Sir may loading method kayo sa shear and moment diagram?
sir what if sa ibang side or e-mirror yung sa may parabola sir? same lang po ba?
What happens If there is another force between the distributed load
Sir what if the support is FIX at both ends??
Thank you master greatest solution❤
Iq🇮🇶
Good Morning Engr. Tanong lang po bakit po Curvature po yung sa Shear Diagram po
good evening po! may ibang methods or ways po ba aside from area method? thank you po.
Nice 👍👍
May way po ba para makuha max moment using moment diagram? Di ko po kasi alam paano
Sir pano po kaya pag spandrel tyka trapezoidal?
Magandang araw sir, 8:44 meron po bang ibang way para makuha yung distance x na hindi gumagamit ng Squared Property of Parabola? Medyo mahina po kasi foundation ko sa parabola baka po may ibang way. You earned my sub sir, khit napadaan lang ako dito para pagkuha ng distance x pag curve yung shear.
Pwede naman. Gamit ka ng shear equation. Tapos u set shear equals to zero. Then compute the value of x
pwede din po
"the change in shear between two points = area of load digram between these points"
V2 - V1 = A(1 to 2)
so at 9:50
let
pt 1 = at A
pt 2 = at zero shear
V2 - V1 = A(1 to 2)
0 - 450 = - 0.5(x)(270x/6)
x = 4.47
yung from 0 to 1341.6. hindi po ba pa sag yun? increasing po kasi diba?
Time stamp po malaman ko kung saan banda thank you
bakit po hindi pwedeng
1/3 (6 - 4.472) (360) ??
Saan part ng video?
yung sa pagkuha ng area nung maliit na spandrel
sa shear
12:38 po
Hindi puede kasi hindi yag ang pinaka peak ng parabola. Ang pinaka peak ng parabola is kung saan ng zero ang load.
What is the value of A load diagram?
Saan banda po sa video?
@@engrjayc 3:52 po.
pag Area of Load Diagram=0 po ay maging -360. Consant ba ang 0?
Diba itimes yan sa 450?
@@japhethmirafuentes8551 yan pong 1/2(-270)(6)
@@japhethmirafuentes8551 area po nh triangle
@@engrjayc I see po, akala ko kase V2 = V1 + Area of Load Diagram • 450 + ½(-270)(6)