410X Presents: DIY Jeep JK Overland Galley/Kitchen
HTML-код
- Опубликовано: 3 авг 2024
- Most of us can't afford the expensive Overland kitchens so I came up with a simple yet professional design for my new Jeep JKU. Please like, comment and subscribe.
www.410expedition.com
Instagram / 410expedition
Instagram / 410overland
Instagram / 410trailrunner
Twitter / 410expedition
Facebook Page / 410expedition 
Развлечения
beautiful job. better than some of the commercial offerings.
Nicely done! Thanks for sharing your build with all of us!
The end product looks very professional and functional; great job!
That’s really a good look. Gives me good ideas for my build in my TJ. I’m doing a lot of “research” because everything being shown is for JKs & JLs. Thanks for a great video and the great ideas.
Looks great and not over complicated. great job.
Looks great, I like that its easily removable. Awesome job !!
Yay I am finally caught up completely. Cant wait for more vids.
This is exactly what I've been looking for. I must have watched every youtube video on DIY drawers and finally came across yours last night. Thank you for this...
Glad it was helpful!
Nice job. Look forward to seeing it in action !
Looks great! Nice job man!! 👍👍
Really like the shelf system you made & installed.
Smart design . Keep up the good work
Thank for sharing, guy. I like your design.
Very nice! I’m subscribing to see more. Thanks for sharing.
thanks for reminding me of starting my build of the (intermediate) drawer system for my LR3. just some 4 weeks to go until the largest (at least european?) overland and offroad expo, abenteuer allrad (4wheeling adventure).
Great job!
It looks great. BTW, you can get drywall / deck screws with a square bit head, that is all I use.
First off let me say...WOW i love it. For me persoanlly, i would like a spot for a cook top, as well as maybe underneath storage for folding table/chairs
That is super cool men.!!!nice!!!👍👍👍
Nice, it looks good.
Well done!
A1 job!
awesome looks great.
Simple and very good practical. Now jump on a plane to the Gold Coast of Australia and install one in my 4wd
I like that build, now to figure out something similar for my 2 door
Thanks Cappy for another great inspirational video. Will have to try and keep up with a similar build. How did you anchor it to the Jeep to keep it from bouncing around?
Looks like it was a factory option. Great job Cappy👍
Thanks man, I appreciate that.
I’m interested in hearing your review of this after the first season using it... getting ready to build my storage unit soon and curious if there’s anything you would change if you built another one.
Nice job Cappy. Not only looks classy but obviously practical. How did you attach the aluminium trim/moulding to the plywood. If you glued it on please let us know what glue you used. I am busy with my version of the EH and am now ready to attach the aluminium trim to the edges and doors, so would be good to know. Cheers from NZ.
I was able to bolt down the galley by using the 2 tie down points near the rear seat. I removed them, found a couple M6 metric bolts and bolted it down.
410 Expedition ... great job... funny was going to ask just that... do you know the weight of it? Saw it on instagram couldn't wait to see this...
410 Expedition that looks pretty darn good. fyi. the aluminum edging is 5/8" outside dimension, 1/16" wall. only true pipe is measured by the inside dimension. even tubing is measured by the o.d. hope this helps you keep from making the dreaded exchange trip to the hardware store in the future.
Just be careful with the length of the bolts. The back anchor threads are like only 1/4”-1/2” and then there’s only an inch to 1 1/2” clearance before hitting metal under the Jeep. You can damage your anchors. I did it just by testing a bolt. 🤦🏻♀️ Gotta repair it tonite before moving on with my build.
Nice job
Nice craftsmanship. I'd hesitate to record it as well- involving a camera almost doubles project times for me. I'm in the midsts of figuring out my Jeep storage, so thanks for the video.
Great job it looks awesome! How did you anchor it to the inside of the Jeep?
Nice! Canada has been Metric for almost Fifty years... Cappy your showing your age...lol Jonesing for more road trips!
Seen a couple of your vids but this one made me SUBSCRIBE. Sweet build. I would like to remove the backseat of my 2 door JK and do the same. How is this mounted to the floor of the Jeep? Thanx! EDIT: Just seen the comment how you mounted to the Jeep.
But Cappy what the angle you used for the back cutout, just messin with you. Looks good man!!
Awesome. Igotta make me something like this for the JK
Looks great! Did you use construction adhesive to attach aluminum edge? Can you provide link for drawer slides? Thanks
I love this build, but it looks like in another video of one of your camping expeditions that you had added a slide out for a stove under the ice box. Did you record your adding that addition on to this unit? I am going on a long road trip in less than a month and would love to duplicate this system in my 2 door JK.
Did you Fasten it down in the back of the jeep?
Very good looking build. How is your screw working? I am wondering if micro kreg jeg for 1/2 inch plywood would be better than the screw you are using. The thing I don't like is the screw that they have for micro jeg for 1/2 inc ply is that it has a fine thread. I am sure it will look good being concealed but I am not sure of the strength. Also, your drawer handle is awesome, can you share the link where u bought it?
i seen you on blackfoot tr today i was in the black jk i give you the thumbs up
Jim Layey very cool. Nice rig!
nice
Nice . Nice nice. Nice nice nice. Nice nice nice nice nice. Oh yea I almost forgot nice.
Do you have a list of what slides you used and where you got them?
Nice job man.The subwoofer is in a bad place in the new model,hate that,prefer my 2007 model haha!!Hey snow is gone??...t-shirt and short pant...FINNALY HAHA!!
Great build Cappy!!! Will we be able to see it at Limestone? That still happening?
sdchbdog it’s still happening. Please send me an email thru our website “count me in”
Hi,
Great project! Will use the design. BUT i have not been able to find the lock for the drawer any tip or link to start with?
how much do you think it weighs out at? i am gonna steal this for sure!! great inovation and classy look!! i will drop pix when i am done
Timothy Holt Jr. I would have to guess around 25lbs.
if you took out the back seats, you'd have how much more space?
Maybe you answered this in the comments and I missed it, how did you secure it into the back of the JK? And is it permanently secured?
I love my weekend adventures but my Jeep is my everyday driver, so I’d like to be able to put it in on the weekends but remove it after each trip.
Also, I may only do a half build because some trips I do solo, I like sleeping INSIDE the Jeep on a half mattress setup.
That would look really nice in my 4 runner. Were you able to fasten it down to the Jeep or is it pretty steady?
coreylynch31 bolted down using 2 of the existing tie down points.
Is that plywood Cappy?
how did you secure it down?
Where are you going to cook on your stove? The ground
So, how will you keep things from sliding forward off the top shelf?
Phantasmos I have 6 tie down points.
I think Cappy likes to hear Cappy say Cappy as many times as Cappy can say the name Cappy
H G Cappy agrees with you when people call Cappy Gaby so Cappy wants to let people know he’s Cappy.
will you build one and sale it? how much?
Try quickie screws!buy large jars cheap better than dw screws since they aren't as hard.dw screws can fracture. They come in Robertson!!!!!!
Will you be able to share your measurements?
Looks awesome! but good god...my grandfather would roll in his grave if I opened a can of paint with a chisel! haha
Would be more helpful if you included your dimensions in mm as well as inches
A Jeep with a subwoofer? Lordy, what has the world come to? My 1972 CJ-5 didn’t even come from the factory with a dang AM radio.
Stock sub bassically does nothing with the stock head unit anyway.