Yamaha hasn’t documented this information that I could find. LOL, turns out the secret is to swipe the touchscreen to get the patching I was looking for. Thanks a bunch!
The long wait for the Dante version of this mixer was well worth the wait, and I'm sure you as well Drew have been wanting to make this video for such a long time now! Thanks for showing everything this wonderful console has to offer in such a small form factor. I think it would be beneficial to others in future videos to go over the differences this console has in comparison to other mixers like the TF series, and although a different family of consoles, the X32/M32 as well since I learned the Behringer and Midas consoles first before adapting to Yamaha's approach with their mixers. An example would be the "on" button is the same as "mute", the sends menu on the right side of the DM3 is what would be the equivalent to "sends on fader", and then how the new 2.0 firmware update allows you to break up the USB to 3 different inputs (13/14, 15/16, 17/18) similar to Behringer and Midas where on a Windows computer, you can change the speaker output device. Before firmware version 2, this was not possible on the DM3 and the console would show up as a single Line speaker output. Mac OS however I believe allows you to choose your USB ins/outs. Again, thanks Drew for your videos! I always rewatch a lot of them to refresh what I learned when needing to mix on my M32R 😊
I waited a year and finally found a Dante version back in April… last month I found a demo Tio1608-D2 I just love them…! They sound great and are so useful.
Such a great tutorial. I’ve watched everything on this mixer and this is the best by a mile. Yamaha need to employ you instead of the regular annoying dude. Nice job.
Great video. I have the DM3 standard and this video is by far the best insight into this board that I’ve seen. Your voice and explanation’s are far superior to the Yamaha tutorials. If I was going to suggest any videos on this desk it would be more in-depth tutorials on sends & returns, setting up monitors / iems, recording to usb etc. Yamaha have tutorials on these subjects but are not relatable as the guy doing them is dam annoying. Once again thanks for your time, love the channel.
Super appreciate this Overview! You're always very informative and content-full! Would you be able to make a video on how to update to Ver 2.0? I'm having a hard time updating the Dante firmware along with the rest. I had to revert back to 1.13. Thanks again!
I was hoping there’d be an update that includes DCAs. The A&H CQ recently released an update to include them. If Yamaha releases an update to include DCAs, I’m in! I really love having faders.
Great video! So do you have any more very basic videos on the DM3 the expalin the functions of many technical words for the volunteer that really has no clue.
@DrewBrashler #DrewBrashler #DB That was awesome! I appreciate all the tutorials. If you can please make a video on the Yamaha DM3D for GEQ- Ringing Out Frequencies for feedback issues. Also, adding videos for the Presonus Studiolive series. Adding them as a newsletter will also be beneficial.
Thanks Drew. As always great video. I did have a question though. Right now I am making a mix on MIX 3 and sending that into my 2-channel Focusrite. When I get on Zoom or Stream I assign the input to the Focusrite. That way the only input it receives is from my Mix 3 output. How could I PATCH the DM3 so it emulates that set up so I don't need the Focusrite. Thanks in advance, and keep up the great tutorials and overviews. I was VERY pleased when I ran across this DM3 overview and you were presenting. :)
will you please make a video with more specific functions like some examples, like recording to USB a particular channel speach, and setting different effect for different channel like channel 1-4 with plate effect FX1 and channel 5-8 with hall effect on FX1. Similarly matrix 1 and 2 for live streaming audio with effect etc
Thank you Drew for the nice overview. Your explanations are always very helpful. Could you perhaps briefly explain how you would loop in an old analog compressor, for example (outboard gear). I do it with two mono channels (one mix bus), send and return, but that always uses up 2 channels. Is there a more elegant way to do it? Many thanks and greetings from Belgium.
Drew, Are you able to route/remove the Delay (FX2) from the LR and send to the Reverb (FX1)? Like you’ve shown us in the past with the M32R? If yes, how would you do it? A video on virtual soundcheck setup with DM3-D and a video on using the new “Inserts” feature on V2 would be cool. I can see a lot of potential for Waves Superrack to be utilized to solve for the lack of Dugan Auto Mixer and using plug-ins live. Not sure about the latency though - might be too high. Yamaha got a lot of things right with this board but still missing a few key features here or there that could’ve made it a X32/M32 killer, IMO. I love mine tho.
i seem to be confused on the outputs. I believe there only total of 8 omni outs in the mixer. But in the output channel, looks like there are total of 9 faders (6 mix bus, 2 mtrx bus and 1 str main left right. so how do you figure which is which?
I own a DM3D and love it, but one issue is that you can't stereo link channels as you can on the TF Series. (Currently, I'm using the FX return channels for my two stereo synths in the studio, but when you link two mono channels as a group you can't CUE them as a group.)
Also because the Yamaha DM3 is quite pricey with fewer channels , others at the same price might be more channels to offer. Unless its for a pub or small event.
It's a slick GUI, but I don't think a lot of people would pay twice as much as you would for an XR18 and an iPad. I suppose it's targeted at a different market. Dig the stash Drew, it suits you!
Thanks man, the stash started as a joke to see how long it would take my kids to make fun of me. 😅 Yeah the pricing on the DM3 is higher than the X-Air, but for venue's needing Dante connectivity, it is a sweet deal. I see this being pretty popular for the corporate gig market with a lot of talking heads on stage.
@@DrewBrashler That´s exactly the reason I´ve bought one for... the small jobs for just a bunch of people talking - simple PA, some mics, some audio playback... for every larger jobs you will also bring an larger console. I will also use this console as an sub-console for broadcasting, where you have for example an already made mix and you have to add commentators. Perfect size for this. Sadly the console is missing an Dugan where all the corporate jobs would benefit from 😕
It's been the same situation for the TF series of consoles also. Hoping for an update in the future, but my guess is that it's a processing power issue.
Hi, I have a new DM3S and I would like to solve the following: I am a solo entertainer and need 3 exact same mixes: 1: FOH 2: In Ear 3: Stream I know how to setup everything to have it working as standard, but what I need is the ability to have the absolut same exact mix for all 3. Also I need to be able to control the volume of all of the 3 on theyre own. Is this possible?
Dear Mr Drew. Is it possible to cascade 2 unit of the DM3 to have 32 channels (16 from unit #1 & another 16 from unit #2), plus, having 32 multitracks? If that is possible, how do u connect & set it up?
Easy, easy, easy. Sadly Yamaha does not have one of the DM3 series that starts at 16 channels plus the addition of 8 channels in 8 channels, 16, 24, 32 etc.
Yamaha hasn’t documented this information that I could find. LOL, turns out the secret is to swipe the touchscreen to get the patching I was looking for. Thanks a bunch!
Fanatic presentation! Please do more videos on dm3 operations.
Thank you
I'm so stoked you are doing this series of training videos!!!! I own two of these and I will use these videos to train my team. Thank you!
Absolutely amazing!! Thanks for this video
The long wait for the Dante version of this mixer was well worth the wait, and I'm sure you as well Drew have been wanting to make this video for such a long time now! Thanks for showing everything this wonderful console has to offer in such a small form factor. I think it would be beneficial to others in future videos to go over the differences this console has in comparison to other mixers like the TF series, and although a different family of consoles, the X32/M32 as well since I learned the Behringer and Midas consoles first before adapting to Yamaha's approach with their mixers. An example would be the "on" button is the same as "mute", the sends menu on the right side of the DM3 is what would be the equivalent to "sends on fader", and then how the new 2.0 firmware update allows you to break up the USB to 3 different inputs (13/14, 15/16, 17/18) similar to Behringer and Midas where on a Windows computer, you can change the speaker output device. Before firmware version 2, this was not possible on the DM3 and the console would show up as a single Line speaker output. Mac OS however I believe allows you to choose your USB ins/outs. Again, thanks Drew for your videos! I always rewatch a lot of them to refresh what I learned when needing to mix on my M32R 😊
Well done, great video. Thank you, Drew
Yamaha DM 3 digital mixer is Amazing , small & cute easy to carry . Can do everything as their seniors with stage box.
It is great! I'm glad I picked one up!
I waited a year and finally found a Dante version back in April… last month I found a demo Tio1608-D2 I just love them…! They sound great and are so useful.
I have seen some people use 2 x DM3-D's instead of a stage box, which is an interesting config, and no more expensive.
Such a great tutorial. I’ve watched everything on this mixer and this is the best by a mile. Yamaha need to employ you instead of the regular annoying dude. Nice job.
I use the DM3s on a weekly basis for concerts. It’s a brilliant small control surface.
Great video. I have the DM3 standard and this video is by far the best insight into this board that I’ve seen. Your voice and explanation’s are far superior to the Yamaha tutorials. If I was going to suggest any videos on this desk it would be more in-depth tutorials on sends & returns, setting up monitors / iems, recording to usb etc. Yamaha have tutorials on these subjects but are not relatable as the guy doing them is dam annoying. Once again thanks for your time, love the channel.
The more videos the better it is !
Great tutorial. Thanks
The DM3 has a new firmware update which adds INSERT function (Pre EQ, Pre Fader, Post ON) and 2 new USB interface modes.
Yamaha should add DD automixer on next update!
Super appreciate this Overview! You're always very informative and content-full! Would you be able to make a video on how to update to Ver 2.0? I'm having a hard time updating the Dante firmware along with the rest. I had to revert back to 1.13. Thanks again!
Can you do a comparison video demonstrating the difference between the Yamaha DM3 and A&H CQ-18T?
I was hoping there’d be an update that includes DCAs. The A&H CQ recently released an update to include them. If Yamaha releases an update to include DCAs, I’m in! I really love having faders.
Great video! So do you have any more very basic videos on the DM3 the expalin the functions of many technical words for the volunteer that really has no clue.
@DrewBrashler #DrewBrashler #DB That was awesome! I appreciate all the tutorials. If you can please make a video on the Yamaha DM3D for GEQ- Ringing Out Frequencies for feedback issues. Also, adding videos for the Presonus Studiolive series. Adding them as a newsletter will also be beneficial.
Thanks Drew. As always great video. I did have a question though. Right now I am making a mix on MIX 3 and sending that into my 2-channel Focusrite. When I get on Zoom or Stream I assign the input to the Focusrite. That way the only input it receives is from my Mix 3 output. How could I PATCH the DM3 so it emulates that set up so I don't need the Focusrite.
Thanks in advance, and keep up the great tutorials and overviews. I was VERY pleased when I ran across this DM3 overview and you were presenting. :)
so far, so good
And if you give us a de-esser on DYN1 and Dugan for 16 Channels, it would be a great desk.
will you please make a video with more specific functions like some examples, like recording to USB a particular channel speach, and setting different effect for different channel like channel 1-4 with plate effect FX1 and channel 5-8 with hall effect on FX1. Similarly matrix 1 and 2 for live streaming audio with effect etc
This board is pretty much the same as a Yamaha TF if were being honest. Just more routing options
good overview how do i connected to computer using usb please ?
Thank you Drew for the nice overview. Your explanations are always very helpful. Could you perhaps briefly explain how you would loop in an old analog compressor, for example (outboard gear). I do it with two mono channels (one mix bus), send and return, but that always uses up 2 channels. Is there a more elegant way to do it? Many thanks and greetings from Belgium.
Excellent video. Any chance of making one showing how to update FW please?
Sure! I'll add that to the list, but it will be around a month or so before it gets posted.
hello good time Thank you for your training
My question is, what kind of preamp is used in this mixer?🙏🙏
Drew,
Are you able to route/remove the Delay (FX2) from the LR and send to the Reverb (FX1)? Like you’ve shown us in the past with the M32R? If yes, how would you do it?
A video on virtual soundcheck setup with DM3-D and a video on using the new “Inserts” feature on V2 would be cool. I can see a lot of potential for Waves Superrack to be utilized to solve for the lack of Dugan Auto Mixer and using plug-ins live. Not sure about the latency though - might be too high.
Yamaha got a lot of things right with this board but still missing a few key features here or there that could’ve made it a X32/M32 killer, IMO. I love mine tho.
Hey can you do a video on using the DM3 and the VST rack
Behringer x32 rack vs Yamaha DM3 ?
Can you create sub mix groups that get sent to the stereo out?
Whether the faders become send to fader when the mix bus is selected?
i seem to be confused on the outputs. I believe there only total of 8 omni outs in the mixer. But in the output channel, looks like there are total of 9 faders (6 mix bus, 2 mtrx bus and 1 str main left right. so how do you figure which is which?
@Drew - will there be a video on the Allen & Heath CQ-18T digital mixer?
Also, will you be creating a preset pack for the CQ?
I own a DM3D and love it, but one issue is that you can't stereo link channels as you can on the TF Series. (Currently, I'm using the FX return channels for my two stereo synths in the studio, but when you link two mono channels as a group you can't CUE them as a group.)
Touch screen response, especially in the eq section is really bad. I wonder if this will be fixed in the upcoming updates.
Also because the Yamaha DM3 is quite pricey with fewer channels , others at the same price might be more channels to offer.
Unless its for a pub or small event.
Which others have more channels, are digital and hybrid, have Dante, and are they worth the same or less?...give me the name and I'll buy it now!
It's a slick GUI, but I don't think a lot of people would pay twice as much as you would for an XR18 and an iPad. I suppose it's targeted at a different market. Dig the stash Drew, it suits you!
Thanks man, the stash started as a joke to see how long it would take my kids to make fun of me. 😅
Yeah the pricing on the DM3 is higher than the X-Air, but for venue's needing Dante connectivity, it is a sweet deal. I see this being pretty popular for the corporate gig market with a lot of talking heads on stage.
You are comparing a digital console with a rack to use with an iPad. You don't know much about this topic, do you?
@@DrewBrashler That´s exactly the reason I´ve bought one for... the small jobs for just a bunch of people talking - simple PA, some mics, some audio playback... for every larger jobs you will also bring an larger console. I will also use this console as an sub-console for broadcasting, where you have for example an already made mix and you have to add commentators. Perfect size for this.
Sadly the console is missing an Dugan where all the corporate jobs would benefit from 😕
Why there are only 15 GEQ available bands while it has 31 GEQ bands?
It's been the same situation for the TF series of consoles also. Hoping for an update in the future, but my guess is that it's a processing power issue.
could you do a how to update a dm3 please
Is there a chance to extend the outputs? 8 Outs are too less for my need (4 stereo IEM plus at least one stereo pair for PA).
Hi, I have a new DM3S and I would like to solve the following:
I am a solo entertainer and need 3 exact same mixes:
1: FOH
2: In Ear
3: Stream
I know how to setup everything to have it working as standard, but what I need is the ability to have the absolut same exact mix for all 3. Also I need to be able to control the volume of all of the 3 on theyre own.
Is this possible?
Dear Mr Drew. Is it possible to cascade 2 unit of the DM3 to have 32 channels (16 from unit #1 & another 16 from unit #2), plus, having 32 multitracks? If that is possible, how do u connect & set it up?
Can you do tutorials for the Allen & Heath Avantis?
I would love to do some, I wish I had an Avantis to work with!
How does it compare to TF ?
Easy, easy, easy. Sadly Yamaha does not have one of the DM3 series that starts at 16 channels plus the addition of 8 channels in 8 channels, 16, 24, 32 etc.
Why it is called 22 channel mixer, but have only 16 inputs.
here I was thinking I was going to watch a movie
A 31 band EQ in a 15 band ?
World's dimmest screen
This video can dubbed in Hindi language as sir😊
I just added an auto-translation for the subtitles for Hindi. I hope this helps!
No copy and paste?
Yes there is. There's a menu when you swipe the right side of the screen. Been running into these alot the past few weeks. Considering getting one.