@@strz3086 backward as in pulling air in the top and pushing out the front. Gonna make the top of the case super dusty and fights against the, admittedly weak, power of natural convection.
I think maybe you should swap the fans around to a more typical cooling setup. Intake at the front on the radiator and exhaust at the top and back. I honestly don't think the cooling on that case is as bad as people make it out to be. Now I do no have this case so I cant say for sure, but I have a H700 which pretty much has the same kinda design with the closed off front panel and intakes on the side and I do not have overheating issues. My ambient temps are usually around 35c during the height of summer and my components don't throttle. Just my 2 cents.
I also have the case. Love it. I concur on having the front as intake. But for the top fans, I have it as an intake and the back fan as exhaust. This will make your case a positive pressure in your case. I checked it on RUclips "positive vs negative pressure on pc (jayz2cent) which makes sense to have a positive pressure in your case. The temps on idle via AMD ryzen master utility are around 30c to 35c and using cpuz benchmark stress test, it's around 70s. I use a msi 240r AIO. Just want to share my insight on the fan arrangements
@@johnsonng7850 I'm trying to decide if I want my top fans as intake or exhaust. I'm waiting for my addon fans to arrive. Adding two more NZXT Aer P (the same ones that come with the Kraken x63) in a push pull, and then putting two ARCTIC P14 PWM at the top. Right now at idle, i'm at about 21 degrees C, sometimes 19 depending on room temp. usually hit about 50-60 full load.
@@vernonbell2558 wow those are nice temps. I am currently using SL120 lian li unifans on my system. They are pretty good. But I think your fans are better. Lol
Most of these parts are out of stock. How do I know? Because I've been waiting for them for a while Also I would like to know pros and cons compared to the Lian Li PC-011 Razer edition
What are the cables even for? What do they connect to? Or is it simply for aesthetics. Do these cables replace other cables, or are they simply there to look nice. Just wondering before I think about purchasing.
I wish I could find a video that would directly compare the Xpg prime argb extension cables vs. Lian Li Strimmer plus’s. Both Lian Li and Xpg make 24 and 8 pin products. Either way that is a very nice build and respectable amount of RGB for sure. 👍😊
Yeah I´m glad someone mentioned it, also it is more about exhaust than intake. I do have this case with rad mounted in front of the case in pull configuration and 3 top fans with 1 back fan all exhausting hot air. GPU is unaffected by warm air coming from AIO and CPU has better cooling it is win-win for me
I noticed that you keep the panels open. I just received my case and can't click them back into place since they're supposed to open when pushed. Not sure if you have the same problem or I am just closing then wrong
I have a r5 5600x and 5700xt build in the razer o11 case. I will upgrade that. But first comes top of the line build in the Razer Tomahawk ATX Case using R9 and Geforce 3k series. With Razer x570 Mobo.
How were you able to stick 3 lian li fans on the side (liquid cooler) and close that little latch on the left held by a screw. My third lian li fan seems to block the latch.
I’m confused I thought you couldn’t fit the radiator (360mm) in the top, or 3 120mm fans on the top. Even the website says that. I can see you did it but I just need to double check, they are just wrong about the specs? I can fit 3 120mm fans at the top? And you mentioned a more ideal set up for cooling, is there a reason you didn’t do that to begin with? Just want to get this case and a really want to make sure i have everything planned out before hand, as lots of people have warned about cooling for this pc, and the specs seem to be debated? Which is quite annoying to be honest, on razers part.
I have the same fans and the same Razer case. My question is can I controll all the fans and liquid fans by Razer Synapse ? I mean lian li has its own app and its own hub. If yes, can you tell me how should I do that ? (Sorry for my English)
Does anyone know what he has the two strimer cables connected to? Right now I used three ports on my uni controller and I was not sure if I could also get strimers for the motherboard and GPU.
I just got my case in and set everything up. I am having an issue though - Synapse is not recognizing or finding the case. What should I do? It's a bit strange having everything synced except the under glow.
Make sure that your motherboard is supported by razer synapse. Like for msi, the dragon center has a button to sync to razer synapse. If your motherboard is supported, download the motherboard software and it should have a toggle to sync up to synapse
@@madlad25 Hello you silly guy, You are so smart! and even funnier then Chris Rock 😄 Asked you ten months ago because I have read many online reviews were they stated razer logo would remain on all the time, I have purchased this particular razer case 9 months ago and i can confirm for a fact that Razer logo stays always on,Depending of your Motherboard configuration you will have to make some changes in the Bios in order for it to turn off along with your PC.
@@MrLuisgsxr thanks for the compliments and saying I'm funnier than Chris rock but Luis ma guy you could also use Ur brain again and take off the front cover than attach the RGB underglow wire to the led box on the back of the front cover than bite a bit of the other red wire so that it can use a AC current instead of a DC one and then attach a relay circuit to the Razer logo which would then allow the Razer logo to be turned on and off in certain circumstances such as nuclear thermal and light conditions.then buy uranium from me which will come from the Congo and will be delivered to you in 3 to 5 years and then you can ignite the uranium and throw it into the united states pentagon and then enjoy a life of free shelter and medical stuff and then at the end of all of this you can retire in a horse's stomach while you are on heavy crack
✅ Channel Sponsor ✅
GET 25% OFF with coupon code: TechBlock
↪︎ geni.us/tbk-scdkey
Why did you setup your fans backwards? Also, I'd swap the M.2 drives so the RGB is easier to see on the bottom.
I'd imagine because there's a lot more ventilation on the top than the front so it still has positive pressure and more air goes in the system
Backward fans are for pull configurations.
@@strz3086 backward as in pulling air in the top and pushing out the front. Gonna make the top of the case super dusty and fights against the, admittedly weak, power of natural convection.
@@Dcheck Yh I’ve got push/pull on my gpu
But if the radiator is meant to cool air coming in, it's the wrong setup. He's cooling air going out, which is pointless.
i thought you couldn't mount 3 x 120mm fans on the top?
"I don't abuse them on purpose" as he throws the nanoleaf on the bed.
How do you put back the glass panel I cant figure how to put it plss helpp mee
If you install the fans on the front to pull air in it would lower your CPU temp by 20C.
For real? I'm about to build a gaming rig using this case. How did you place the other fans?
how did you get a 360mm fan setup in top the case doesn't support that set up
It’s possible 🤣
@@TechBlock I was wondering if you drilled custom holes or did it go directly into the guide rails
Asrock has razer edition taichi motherboards
How did you get them fans I can’t find them anywhere in the us under $45
What was the finishing cost
I think maybe you should swap the fans around to a more typical cooling setup. Intake at the front on the radiator and exhaust at the top and back. I honestly don't think the cooling on that case is as bad as people make it out to be. Now I do no have this case so I cant say for sure, but I have a H700 which pretty much has the same kinda design with the closed off front panel and intakes on the side and I do not have overheating issues. My ambient temps are usually around 35c during the height of summer and my components don't throttle. Just my 2 cents.
I’m kind of a noob at like PCs and stuff and I’m trying to get into it so can u do a step by step tutorial on how u built this
I was thinking to buy this, you're a life savior, I didn't where to start, thank you !
Air flow should be coming from the front in and out through the back/top. I've got that case though, it's a work of art IMO
I also have the case. Love it. I concur on having the front as intake. But for the top fans, I have it as an intake and the back fan as exhaust. This will make your case a positive pressure in your case.
I checked it on RUclips "positive vs negative pressure on pc (jayz2cent) which makes sense to have a positive pressure in your case.
The temps on idle via AMD ryzen master utility are around 30c to 35c and using cpuz benchmark stress test, it's around 70s.
I use a msi 240r AIO.
Just want to share my insight on the fan arrangements
@@johnsonng7850 I'm trying to decide if I want my top fans as intake or exhaust. I'm waiting for my addon fans to arrive. Adding two more NZXT Aer P (the same ones that come with the Kraken x63) in a push pull, and then putting two ARCTIC P14 PWM at the top. Right now at idle, i'm at about 21 degrees C, sometimes 19 depending on room temp. usually hit about 50-60 full load.
@@vernonbell2558 wow those are nice temps. I am currently using SL120 lian li unifans on my system. They are pretty good. But I think your fans are better. Lol
@@johnsonng7850 once I get my fans in when they get here I'll post a pic. Not doing RGB minus the RGB on the case and my x63
Hi i terms of cooling does the tomahawk offers better cooling than the Lian Li razer edition that you used before? thanks
Most of these parts are out of stock. How do I know? Because I've been waiting for them for a while
Also I would like to know pros and cons compared to the Lian Li PC-011 Razer edition
exact same with me man, hopefully someone has some experiences to talk about
What are the cables even for? What do they connect to? Or is it simply for aesthetics. Do these cables replace other cables, or are they simply there to look nice. Just wondering before I think about purchasing.
I wish I could find a video that would directly compare the Xpg prime argb extension cables vs. Lian Li Strimmer plus’s. Both Lian Li and Xpg make 24 and 8 pin products. Either way that is a very nice build and respectable amount of RGB for sure. 👍😊
Thank you for the parts you have made it easier to get the parts
what is that light mode for the lianli cable that you've shown off at the start of the video ?
How you able to fit 3 fans on top of the case?????
not sure if i prefer this or the lian li case
Why didn't you go front intake?
a tip! never have the top fans as intake fans bc hot air rises and it will flow into the top fans that way.. so u might wanna change that:)
Yeah I´m glad someone mentioned it, also it is more about exhaust than intake. I do have this case with rad mounted in front of the case in pull configuration and 3 top fans with 1 back fan all exhausting hot air. GPU is unaffected by warm air coming from AIO and CPU has better cooling it is win-win for me
Are all the components included for it to operate? Or do you need to buy everything custom?
You gotta buy every shit
you gonna make a video about the razer argb controller in a pc?
i just see the notifications and a and see this live stream, im like nope i ain't gonna miss this out
My Computer build was inspired by you Em
the sexyest PC case in my eyes - love Razer. amazing choice of Parts to look sooooo well finished. 5/5 build
I noticed that you keep the panels open. I just received my case and can't click them back into place since they're supposed to open when pushed. Not sure if you have the same problem or I am just closing then wrong
M. Do you planning changing mobo to X570 Taichi Razer edition?
You understand you’re going to want the radiator to pull in fresh air to cool your CPU. Not to push hot air into it. Right..
is the razer part just the case?
I mean when you are already buying a modular psu which is clearly meant for cable management why not cable manage your pc right away lol 13:26.
when you buy it is it already built
does all of this come with the pc case
I have a r5 5600x and 5700xt build in the razer o11 case.
I will upgrade that. But first comes top of the line build in the Razer Tomahawk ATX Case using R9 and Geforce 3k series. With Razer x570 Mobo.
How were you able to stick 3 lian li fans on the side (liquid cooler) and close that little latch on the left held by a screw. My third lian li fan seems to block the latch.
this guy is such a razer fanboy. xD
i like razer too.
i would recommend that you switch your fans up because if you set the front fans as outtake, you will choke your pc in the long run
What do you use to clean the tempered glass on your case
@TechBlock can you tell me how you got the hdd tray out of the case? I can’t fit my power supply in my case with it there.
Were did the 3080 go?
Nice Lian-Li Lancool II there.
I’m confused I thought you couldn’t fit the radiator (360mm) in the top, or 3 120mm fans on the top. Even the website says that. I can see you did it but I just need to double check, they are just wrong about the specs? I can fit 3 120mm fans at the top? And you mentioned a more ideal set up for cooling, is there a reason you didn’t do that to begin with? Just want to get this case and a really want to make sure i have everything planned out before hand, as lots of people have warned about cooling for this pc, and the specs seem to be debated? Which is quite annoying to be honest, on razers part.
It doesn’t officially support the 3 fans on top
I have the same fans and the same Razer case. My question is can I controll all the fans and liquid fans by Razer Synapse ? I mean lian li has its own app and its own hub. If yes, can you tell me how should I do that ? (Sorry for my English)
does the Razer Tomahawk ATX come with a hdmi cable?
Can MSI Z670 motherboard fit inside it?
what are the monitors called and what is the name of the desk? plis
The rgb blob lol. Looks great
With the motherboard you using can you use a normal hard drive and Ssd?
does it support a 360mm aio?
will it fit CORSAIR iCUE H150i ELITE 360mm water cooling?
I’m going to build the exact same pc man lol, mainly because I’m new to pc gaming and I just want parts that work together 🤣
I have this case and have loved it.
I wanna see a mini it razer tomahawk build plss!
Can u tell me what is a better power supply that works but have everything else still cuz i have a 3090 with a i9
Does it light up at the back? Was very useful with the h440 casing..even the side logo doesn't light up this time
Can i Put the 360 AIO in the TOP ? and change the 3 Uni fan in front ?
Even though i am not a razer fan it looks kinda sick
So MSi mb rgb is compatible with razer? Or just the Gpu and ram is controlled through msi and then controlled by razer?
Can you try out the razer rgb hub
Have you seen the AsRock Taichi X570 - Razer Edition motherboard or the Deepcool GH-01 A-RGB accessory yet? I'd imagine that's something for this pc.
review the new razer chroma addressable rgb controller
Is it pre built
Did the xpg ssd ever end up working?
I think intake should be at the bottom & right side. Exhaust should be top & left. But that’s just me🤷🏻♂️😅
Do you need to buy everything in the pc or does it come with it?
This is all custom built, so you’d need all the individual parts
@@TechBlock how much does it cost in total
Can the pc connect to a tv
Hi. Can this lian li uni fan sl 120 fan control by razer chroma? My motherboard is asus crosshair viii dark hero. Thank you.
Does anyone know what he has the two strimer cables connected to? Right now I used three ports on my uni controller and I was not sure if I could also get strimers for the motherboard and GPU.
@TechBlock
will you make a vid on the new x570 taichi razer edition?
Your such an inspiration for small content creators!
i have a X570S Elite AX, 3080 Gaming OC 10G, V850 V2 gold, isit possible to fit in this cases?
jus wanna make sure before i buy the cases, now got promotions
how did you managed to install 3 fans at the top? i cant fit my 3 chromax noctua fans 120mm up top. only 2 120s or 2 140s.
It's easy, I installed 3 sl120 lian li fans. The cables in the front needs to bend more
Nice video bro I really liked the background music
Hey i got the same case but the recommended size for that motherboard is smaller, how did you fit that in?
That case supports E-ATX, ATX, Micro-ATX, Mini-ITX motherboards! So basically any motherboard will fit :-)
Can you make a how to build video?
I remember when this dude was at 25k, keep grinding to 1 mil!
How do you put 3 120mmfans on top?
It’s possible 😂
@@TechBlock cannot put 3 Razer kunai 120mm on top, there is the place for but not emplacement for screws
What is the name of the song
Why no gameplay or testing
How’s the airflow ?
I've been waiting for this one!
Still.. very gorgeous pc build.
Wish I knew how to build one.
Wish I atleast afford that:)
is there vent at the top of the case
?
Yes and a removable dust filter
@TechBlock, What msi intel motherboards can fit in there
Any full size atx motherboard should fit in there.
I just got my case in and set everything up. I am having an issue though - Synapse is not recognizing or finding the case. What should I do? It's a bit strange having everything synced except the under glow.
Make sure that your motherboard is supported by razer synapse.
Like for msi, the dragon center has a button to sync to razer synapse.
If your motherboard is supported, download the motherboard software and it should have a toggle to sync up to synapse
Tech block I’ve got the razer lian li dynamic case and it looks so nice like your setup
That’s an insane build
This guy is basically a razer ambassador
Is the case connected to the mobo to use Razer synapse?
Yes via an internal USB
@@TechBlock thank you
You have one exhaust fan isn’t rgb:/
you should look at the new x570 taichi x razer edition
nice build!!!! Love The Vid!!!
Thank You So Much For Hearting My Comment Em!!!! Big Fan!
WHAT THE FLIP FLOPS THAT BUILD IS INSANE
I think you may have accidentally lent on the caps lock key.
Can it come bulit
I like how to camera can't handle the bad cable management
WHY ARE THE INTAKE ARE AT THE BACK
HEY BUDDY LOVE THAT BUILD! BY THE WAY DOES RAZER LOGO TURNS OFF WHEN PC IS OFF? THANKS!
If u use ur brain then yes luis
@@madlad25 Hello you silly guy, You are so smart! and even funnier then Chris Rock 😄 Asked you ten months ago because I have read many online reviews were they stated razer logo would remain on all the time, I have purchased this particular razer case 9 months ago and i can confirm for a fact that Razer logo stays always on,Depending of your Motherboard configuration you will have to make some changes in the Bios in order for it to turn off along with your PC.
@@MrLuisgsxr thanks for the compliments and saying I'm funnier than Chris rock but Luis ma guy you could also use Ur brain again and take off the front cover than attach the RGB underglow wire to the led box on the back of the front cover than bite a bit of the other red wire so that it can use a AC current instead of a DC one and then attach a relay circuit to the Razer logo which would then allow the Razer logo to be turned on and off in certain circumstances such as nuclear thermal and light conditions.then buy uranium from me which will come from the Congo and will be delivered to you in 3 to 5 years and then you can ignite the uranium and throw it into the united states pentagon and then enjoy a life of free shelter and medical stuff and then at the end of all of this you can retire in a horse's stomach while you are on heavy crack