Thank you for the suggestion. May I offer you a piece of advice? If you place that plastic lid on a piece of wood and drill partially through the plastic then flip it over and drill from the other side you won't get that Burr that you're trying to clean up with your butter knife
🔴 What Is Islam? ⚠️ 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
Funny video! Pretty much went how mine would go if I went to the trouble to make one! LOL I'm going to give this a shot! Thank you for taking the time to share your experience!
Hey, Friend. Just reverse your drill bit. Even the wide paddle bit. Reversing the bit stops it from catching and ripping. Makes a cleaner hole without the hard to remove pieces. Try it.
This is way more than you need to do to accomplish your goal, just poke a 1/16th inch hole centered on the middle of the lid and cut a piece of electrical tape long enough to put a short fold on one end, and then have the tape straddle it just shy of the hole, then get yourself a 2 1/2"sink stopper with a 1 3/8ths bottom insert (99 Cent Store) and put a hole big enough to insert the Food Saver hose fitting into the top of it. Place the sink stopper over the hole covering all of the electrical tape that is sticking up a little just shy of covering the hole and vacuum the air out until you get to about fully vacuumed on the vacuum setting, slide the sink stopper over the tape and it will seal it just fine. You will now have a small fold on the tape to just pull up on the tape to release the air when ready to eat, super easy and it works great! I use a glass version of the bowl with a plastic lid, this is a little more sanitary. The lid does compress a little into the bowl when fully vacuumed.
Temu have a jar vacumb for mason jars for about 25$ .I recently bought one , shall give it a try soon. Food saver vacumbs have a jar sealing connection option, check out freeze drying machine prices. Expensive 25 years storage
The two brand names are FreshOTG and Bartelli. Do your best, last time my search failed. I am reusing them regularly and have not needed to reorder. What we really need is a 3d printing code.
www.amazon.com/Lasting-Freshness-Container-Canister-Cylinder/dp/B00IH16USU/ref=ex_alt_wg_d?_encoding=UTF8&pd_rd_i=B00IH16USU&pd_rd_w=pe941&pf_rd_p=4e1b46a8-daf9-4433-b97e-d6df97cf3699&pf_rd_r=6F6BT9Q3A9R548YPYQW5&pd_rd_r=f367c4af-f116-42eb-8646-8cf6a609ba70&pd_rd_wg=jj80k&th=1 This one has a similar pump.
Try this 1 way valve www.amazon.com/Plastic-Check-Valve-Inline-Return/dp/B096MC67WW/ref=sxin_17_ci_mcx_mi_sr_m_il?content-id=amzn1.sym.14a38c0a-385f-4735-bb28-d2be35b783e1%3Aamzn1.sym.14a38c0a-385f-4735-bb28-d2be35b783e1&cv_ct_cx=1%2Bway%2Bvacuum%2Bvalve&keywords=1%2Bway%2Bvacuum%2Bvalve&pd_rd_i=B096MC67WW&pd_rd_r=066a1cb1-ff0c-4bef-b809-ec5d651f18d1&pd_rd_w=m9Ci8&pd_rd_wg=Aw1wt&pf_rd_p=14a38c0a-385f-4735-bb28-d2be35b783e1&pf_rd_r=PJBNAGADFRZNRK7B87NH&qid=1680911122&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sr=1-2-9eb59ba4-cd99-4f87-9222-b322340b23c8&th=1
Depends bought 2 and the were both different. Bartelli the name of the first one came with a pump 5 valves and 5 bags. FreshOTG was the second one and that came with 8 valves only. Hope that helps.
The drill bit needs to be big enough for the seal joiner to fit into 8.5mm or 0.33 inches. The companies that I purchased from on Amazon or Ebay are Bartelli and FreshOTG www,green-n-pack.com
I could pump until the container folded in if I drilled the hole just enough for the attachment to squeeze through. It may look like a miniature bike pump but they have set it up oppositely . The seal only allows air one way.
Also I was able to get the bartelli for $15 for 3 of them but it comes with the hand pump, 3 bags, and 3 clips. So if I wanted more, I would have to buy a whole other package
Great work round Sadly cant find those valves at all I found this on ebay I'll give it a try VacRing - Amazing Vacuum Packing Valve Save Space Easy Storage £2.58
Absolutely fantastic 👍👍
Thank you for the suggestion. May I offer you a piece of advice? If you place that plastic lid on a piece of wood and drill partially through the plastic then flip it over and drill from the other side you won't get that Burr that you're trying to clean up with your butter knife
Cool shall try to remember that thanks,
Oh wow, thank youfor sharing! Appreciated 🙏
🔴 What Is Islam? ⚠️
🔴 Islam is not just another religion.
🔵 It is the same message preached by Moses, Jesus and Abraham.
🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God.
🔵 It reminds us that since God created us, no one should be worshipped except God alone.
🔴 It also teaches that God is nothing like a human being or like anything that we can imagine.
🌍 The concept of God is summarized in the Quran as:
📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚
🔴 Becoming a Muslim is not turning your back to Jesus.
🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
Funny video! Pretty much went how mine would go if I went to the trouble to make one! LOL I'm going to give this a shot! Thank you for taking the time to share your experience!
within a 9 min video the pump has broken, how sturdy are these things more interested in buy it for life vaccum sealing
Dangerous if swallowed as well. Good for keeping air trapped.
Hey, Friend. Just reverse your drill bit. Even the wide paddle bit. Reversing the bit stops it from catching and ripping. Makes a cleaner hole without the hard to remove pieces. Try it.
Thanks. Just thought I'd add. There was no need for me to use a wide drill bit . Only the circumference of the join was nessasary.
You are adorable and quite clever.👍
prrrrrrrrr thanks
This is way more than you need to do to accomplish your goal, just poke a 1/16th inch hole centered on the middle of the lid and cut a piece of electrical tape long enough to put a short fold on one end, and then have the tape straddle it just shy of the hole, then get yourself a 2 1/2"sink stopper with a 1 3/8ths bottom insert (99 Cent Store) and put a hole big enough to insert the Food Saver hose fitting into the top of it. Place the sink stopper over the hole covering all of the electrical tape that is sticking up a little just shy of covering the hole and vacuum the air out until you get to about fully vacuumed on the vacuum setting, slide the sink stopper over the tape and it will seal it just fine. You will now have a small fold on the tape to just pull up on the tape to release the air when ready to eat, super easy and it works great! I use a glass version of the bowl with a plastic lid, this is a little more sanitary. The lid does compress a little into the bowl when fully vacuumed.
How about you make a video? Thanks
Nice tip. Where are you from ? South Africa, your accent sounds special.
New Zealand
@@craigggy Ah!
Do you sell the vacuum plugs ?? Where can they be bought ??
I'm not sure they are for sale anymore. Some vacuum sealers come with a hose and a sealing lid for jars
Could you use a container like that as a chamber to vacuum seal a jar?
Temu have a jar vacumb for mason jars for about 25$ .I recently bought one , shall give it a try soon. Food saver vacumbs have a jar sealing connection option, check out freeze drying machine prices. Expensive 25 years storage
Where did you find those bags? I can find different brands but they aren't two piece like those... Might you have link?
The two brand names are FreshOTG and Bartelli. Do your best, last time my search failed. I am reusing them regularly and have not needed to reorder. What we really need is a 3d printing code.
www.amazon.com/Lasting-Freshness-Container-Canister-Cylinder/dp/B00IH16USU/ref=ex_alt_wg_d?_encoding=UTF8&pd_rd_i=B00IH16USU&pd_rd_w=pe941&pf_rd_p=4e1b46a8-daf9-4433-b97e-d6df97cf3699&pf_rd_r=6F6BT9Q3A9R548YPYQW5&pd_rd_r=f367c4af-f116-42eb-8646-8cf6a609ba70&pd_rd_wg=jj80k&th=1
This one has a similar pump.
@@craigggy Yes, I have been searching. I saw those containers, too. I actually want just the valves and the $14 kit for 3 is too much!
@@scraperfect The valves have been hard to trace for months. I shall put my mind to a 3d print.
Try this 1 way valve www.amazon.com/Plastic-Check-Valve-Inline-Return/dp/B096MC67WW/ref=sxin_17_ci_mcx_mi_sr_m_il?content-id=amzn1.sym.14a38c0a-385f-4735-bb28-d2be35b783e1%3Aamzn1.sym.14a38c0a-385f-4735-bb28-d2be35b783e1&cv_ct_cx=1%2Bway%2Bvacuum%2Bvalve&keywords=1%2Bway%2Bvacuum%2Bvalve&pd_rd_i=B096MC67WW&pd_rd_r=066a1cb1-ff0c-4bef-b809-ec5d651f18d1&pd_rd_w=m9Ci8&pd_rd_wg=Aw1wt&pf_rd_p=14a38c0a-385f-4735-bb28-d2be35b783e1&pf_rd_r=PJBNAGADFRZNRK7B87NH&qid=1680911122&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sr=1-2-9eb59ba4-cd99-4f87-9222-b322340b23c8&th=1
They seem to have stopped selling the valves - none on Amazon any more.
Yes I found one wish I knew how to share link with U
@@joanv8190 What is the name of the website and name of the product, maybe I can find it.
one package contains how many valves?
Depends bought 2 and the were both different. Bartelli the name of the first one came with a pump 5 valves and 5 bags. FreshOTG was the second one and that came with 8 valves only. Hope that helps.
3$ each
This is amazing. I love DIY stuff
You are #1 Craigggy
@@KetchupSandwich The hole was way to big.
Vacu Wine Saver Stoppers do the same job also.
have you updated the ebola busting pie to work on covid?
What size is the drill bit you used? There is no link where to purchase the seals used to place in the lid after drilling the hole.
The drill bit needs to be big enough for the seal joiner to fit into 8.5mm or 0.33 inches. The companies that I purchased from on Amazon or Ebay are Bartelli and FreshOTG www,green-n-pack.com
Can dry fish be stored in this container?
Be the first to try.
Thank you!
0:10 didn't know you modelled, craigggy
What brand was this and where do you get them
freshotg
Where to buy the stuff
I'm confused. It appears that you are filling with air rather than extracting the air for a vacuum seal.
I could pump until the container folded in if I drilled the hole just enough for the attachment to squeeze through. It may look like a miniature bike pump but they have set it up oppositely . The seal only allows air one way.
Not able to find these valves, can anyone suggest another place to get. Thanks you
Amazon
Where can I buy these. I tried looking on the net but can not find the bags. Do you have a link?
Check this out. watch the video to the end they have a hose that vaumbs containers.
www.amazon.com/dp/B0CLGS423B?pd_rd_i=B0CLGS423B&pf_rd_p=6ca944f8-539c-499e-a3a4-26a566d1de59&pf_rd_r=X7K94WSSDATZ3VZ24ZVT&pd_rd_wg=rV8TC&pd_rd_w=N0VLp&pd_rd_r=ced6c92a-cc4f-4897-9e23-622e4b4a5ffb&th=1
zeropak.co.nz/jar-vacuum-sealer-with-hand-pump/ This one is more traditional and less plastic friendly.
where can i bay the valves
www.newegg.com/p/2AA-00FY-00001
Ebay and Amazon have run out . I found this web site.
We’re did u get that at
Amazon and Ebay but they have been withdrawn . I'm not sure why because they are still sold as a permanent attachment to containers and bags.
@@craigggy shady business practices and cartel-like price fixing. I found the same product selling for $40 US on ebay.
Also I was able to get the bartelli for $15 for 3 of them but it comes with the hand pump, 3 bags, and 3 clips. So if I wanted more, I would have to buy a whole other package
Thanks u kindly for this video but can u please put the link for the item Thanks
1 & 3, salt intake is my problem
And nice hack by the way
Maximize freshness also by filling with water, changed every day .
Thanks cool idea. if its leaking use silicone sealant to fix it . its very cheaper.
Where did you buy it from, do you have any link?
www.amazon.com/GreenNPack-GVP-R25-FreshOTG-Starter-Green/dp/B01B79YSGO
I would say that this guy needs these containers to store his weed, but I'd be really surprised to hear that he has any left after making this video.
Love your videos man!!
Hi Maeni. I am happy to bring better health. The hole only needs to be as round as the spike.
@@craigggy I gotta get some and try it soon.
I love it. Gonna try to hunt these down.
Hopefully one day we can 3d print them.
You are funny
You know there's this wonderful thing called editing. Just saying.
Lol
I just threw up in my mouth a little.
@@robertfrapples2472 Jar sealing is a better idea.
Great work round Sadly cant find those valves at all I found this on ebay I'll give it a try
VacRing - Amazing Vacuum Packing Valve Save Space Easy Storage
£2.58