Freightliner Cascadia DD15 engine manual fan switch installation
HTML-код
- Опубликовано: 4 окт 2024
- Now accepting support and donation to my channel.
accepting: personal check, business check, money orders, gift cards, gifts, tools, shop articles, etc,..
send your checks or money orders payable to Francisco Amaya
send your support and donation to:
Francisco Amaya
P.O. box 672
Fontana CA, 92334
OR
PAYPAL
www.paypal.com...
(remember to add your address at PayPal donation)
__________________________________________________
Freightliner videos: • Freightliner videos
the fan switch costs around $40.00
You can by the Cascadia fan switch at any FREIGHTLINER dealer, if you need a VIN number here is one AV5371
That Vin number comes with manual fan switch from factory.
DD13 DD15 DD16 MERCEDES BENZ OM 471 OM 472 OM 473
__________________________________________________
Radio station: 96.7 FM Kcal rocks IE
Thank you so much buddy. Works %100. When I bought the part from the dealer they told me that it’s not gonna work but it did. No wonder why the call them stealers. Thanks again and god bless
They told me it won’t work for my 2013
Mpower what yr is your cascadia
@@WilkHustle it’s 2011
I’m going to pick up my part tomorrow hopefully it won’t need programmed
So no wire or plug needed just put the switch in? Help me understand this lol
Thanks again, Francisco!! Your videos are very helpful and very well done.
I love you vids they be straight to the point.
Learned so much from this channel. Thank you.
Muchas gracias amigo, tus videos son de mucha ayuda para mi
Hola Francisco! Gracias por tus Videos. Le puse fan switch a mi DD15 y me salio codigo 49 SPN 523530 FMI:1. Replasamos un switch que decia OPT 1 hera xtra. Gracias por tu ayuda.
went to the dealer and ask for a manual fan switch with my vin # even tho i had no empty slots , they gave me one 43$ , i remove a switch that i never use , installed the switch 5 minutes and boom it worked perfect , Gracias francisco el mecanico queria cobrarme 150 por esto haha , cascadia 2011
I didn’t see what he plugged the switch into? Just put the switch into the slot please help me make sense to this 😂
Eres chingon Tocayo, e visto todos tus videos y me as enseñado muchas cosas para mi Cascadia
I try to find the switch but the dealer doesn’t recognize this part number
Liridon Blakqori
Use this VIN FP4546
It has a factory fan switch.
Thanks very much videos are very helpful.
I am going to replace my starter after wathing ur other starter replacing video.
I see a lot of people saying they want to add this switch but nobody is saying what for. I would assume that they want to keep the engine cooler, but shouldn't it do that automatically? I have a 2016 and 2017 Cascadia with DD15 and they both always sit right at 200 degrees during normal running, except during hard, extended uphill pulls and even then never get into the red. And that's about the only time I ever hear the fan come on. In fact I'd say I wish I could make the engine run warmer- If it idles in the cold, the temp on the 2017 can drop as low as 150. On the 2016 I can run the idle up to keep the temp closer to 200 but unless it's summer it won't even get that high. I have run overweight loads in the summer, in traffic, uphill, and still don't have overheating issues. I feel like if you are wanting to run your fan more to keep your engine cool, what you really need to look at is maybe your water pump, your coolant quality, your thermostat, or something similar because it sure seems like these engines do a great job of keeping cool already.
THANK YOU VERY MUCH FOR THE TIPS !!!
Thanks for this video, but the correct item no. is the one on the switch that A06-53782-016 compare to the no. written in orange color that's not exist at the dealer.
Good catch buddy thanks
hmmm....did I miss something? or is the switch housing pre-wired? I did not see any wiring being connected
+vroor32
No wiring needed for Cascadia oem switch
The Cascadia cab cab wiring uses digital signal j1939 so all you need is to insert the switch on the empty switch slot
But I say some Cascadia will require mcm programming specially the newest ones like 2014 and up.
Just buy the switch and install it on the empty slot (if your Cascadia has any if your has not empty switch slot you can remove a switch that you don't use at all)
After that just start the engine and switch the switch on to test the manual fan override.
Francisco Amaya what happens if you have no power to the switch
Francisco Amaya you are very helpful.
you need the OEM software (Detroit Diesel Diagnostic Link) to modify your parameters and notify the computer that you have installed a new switch. And you will get power to the switch.
Amigo me podrías explicarme en Español sería de mucha ayuda te lo agradecería mucho !! Saludos desde México 😉
Fransico le compré un switch a mi 2013 Cascadia con un Cummins isx15 lo tengo que programar
So you don't need any wiring at all?? The switch doesn't connect to anything?
great video u know your stuff
Y como conectaste los alambres del control al fun
Too easy to believe but anyway I’m going to try buying that one and the mirror heat. My mirrors have the wiring for heating but there are no switch on my dashboard for that option. Thank you hermano
The DD15 Whisperer! or Freightliner Whisperer!
This method will not work on 2011 and up trucks. You need to get access to CPC harness/grey connector (CPC is located under dashboard behind of right panel, top right corner, black module with four different colored connectors). Two cavities must be added and regular switch or cascadia's dash OPT switch must be added. No reprogramming needed. I have done on many trucks. When 2/13 cavity is shorted to 2/2 cavity which is ground fan will come on after 10 sec. For detailed info how to add fan switch read DDEC10 A&I manual.
Mushegh Hayrapetyan how about a 2013 with Cummins how do I wire switch
I have no idea bro. find Rawze here at RUclips and ask him.
Can you put a video how to do it?
Good info my man!!
Does the switch need to be wired how do you get the power from
please make video about Freightliner Cascadia (automatic) "E cost" not working sometime . lots of people are having this problem but seems like no one knows how fix it.
BUENOS DÍAS FRANCISCO TUS VIDEOS SON MUY BUENOS TENGO UN FREIGHTLINER 2014 COMO PUDO SAVER SI UN SWITCH COMO EL QUE PUSISTES EN EL VIDEO TRAVAJA SIN INSTALAR ALAMBRES
Perfect!!!
Hello..is there a wiring for the fan switch in there Already?
Francisco cuanto cobras por poner manual fan clutch,gracias
When installing the Manuel fan switch, do you need to do anything under the hood?
Tengo un freightliner 14cascadia evolución si trabaja el switch si lo instalo como lo muestras usted . Aguamos videos en espanol amigo Francisco amaya
I have added this switch and it does not work. I have the standard DDL of course I cannot program it. I talked with Freightliner shop and they say they have to run wires from the motor to the fan switch in order to make it work. They say they cannot do it with the computer. Which leads me to believe they don't know how to do it. Can you give me a breakdown of how they do it with the software.
thanks
First you need the DDDL software pro
For that
Do you know the steps in DDDL Pro so I can point them in a direction?
Go to parameters
Go to all parameters
Seek MSF
Search switches location
Set the fan switch
Send parameters
Enter password
Wait for confirmation
Start the engine
Test the fan switch
And it is done.
Didnt work on my '13 Cascadia, Dealer couldnt program it in
hi love your videos can u show me how to program the switch in the software i have it install in my computer
I have a 2015 cascadia evolution how much you think it would cost me to add a air bag dump switch
2013 Freightliner Cascadia dd13 I don’t have a slot can I take my regen button out and place the fan one on that slot since I deleted the system for regen?
Hello Fransisco. I have 2012 freightliner dd15. Will it work for that?
Will this work on a 2014 Freightliner Cascadia dd15
Se le puede hacer eso a un Cascadia del 2012 DD-13?
Does this work on a dd13 2013
You typed In the part number wrong
Mr. Francisco i
I have a 2020 freightliner Cascadia and I want to install manual fan switch
Do I have to go somewhere to program when I install that or I just installed and will be OK
follow this using dddl
sam unit - msf switch - switch 32: present
fan section - manual fan request: enable
Can we install the fan switch on a 2017 freightliner cascadia evolution Francisco??????
Does it work with a Cummins ISX engine
Francisco que si no tengo espacio para ese botón
Debería también editarlos en español
+Eric Medina
Si, tiene razon.
I do know that the guy is Hispanic, but is it necessary to switch the language and ask him in Spanish? It gets annoying a little tbh.
@jon Anderson It also gets annoying for Them Us Me Hispanics or any other Latin Americans here RUclips isn’t just for English and it’s not meant to just cater to the whites needs his asking because he also wants to understand what’s been said.
Hi Francisco where is your shop ?
What program do you need to program it and where do you get it?
Will this fan switch work with my 2009 cascadia DD15??
It is possible, almost all old Cascadias are already programmed
Thank you! Will this work for a 2015 dd13 cascadia?
It should but check my latest video. I have details on how to program it. You will need it.
Francisco esta parte también funciona con un ISX 2012? O es específica para Detroit? Gracias
No estoy seguro de eso, porque en el Cummins isx tenes que fisicamente cambiar la programacion de el fan.
Pero lo puede intentar a ver que pasa.
Ey francisco puse el suich en un cascadia 2015 y no trbajo. Alo que entendi tengo q programarlo con la cumputadora para q trabaje??
Si con el programa DDDL se tiene que programar.
Hey Francisco tengo cascadia 2011 dd15 mid roof con def yo tengo dos pregunta 1 si manual fan funcionaria en el mio y 2 y si funcionaria traction control tengo 2 espacio en el mio . Muy buen aporte 👍👍👍👍👍
No estoy seguro para el 2011
Tiene dos espacios vacios?
Francisco Amaya si tiene dos espacio vacio como el que esta en el vídeo
Puede instalarlo en uno vacio y ver si trabaja.
Francisco Amaya ok listo gracias
Francisco Amaya buenos días yo tengo un 2011 cascadia puse el botón en los dos espacios vasios como sale en el vídeo y ni prende La Luz que puedo aser al respecto , gracias
Amigo yo siempre estoy viendo sus videos sobre los cascadias 💪🏼 tengo una pregunta a mi camión Cascadia se le quedó activado el fan y ya le cambié el silenoid fan clucht y sigue siendo igual que podría ser?
Revise que le llege corriente y Tierra Al fan clutch solenoid (con la llave en on y El motor apagado)
Si le llega revise si El fan clutch esta tirando aire. Me avisa que encuentra para darle mas detalles
Hey I si no le esta llegando voltage ? Yo tengo el Mismo problena
El voltage biene de la computadora, puede see un cable roto, ac pressure switch or la misma computadora
Es solo conectar el switch del engine fan
Will this work on a 2013 cascadia? My display gauges look a little different but the buttons are the same by the cup holders
Yes, it will. But it will need programming.
got any dd15 fuel doser valve install or nox sensor videos in the works
+Charles Robinson
I don't have those videos yet, I am planning to do those videos soon.
You can check my channel and I have some videos about the nox sensor and the scr efficiency
I don’t have empty space in my cascadia can I take off the utly lamp and install the fan and will work. 2010 freightliner cascadia
I am not sure but you can try it.
I have a 2012 Cascadia DD15 my fan is continuously running. I have changed the solenoid but it's still running continuously. I have tested the fan clutch and it is working as it poses to work. What could be the problem? I have tried to find a fuse but couldn't find it in the main fuse box in the glove compartment or the hood by the steering column. Is there any fuse for the solenoid if there is one where it could be? Please help. Thanks
Replace A/C high pressure switch
Buenas tardes. Oiga. Acabo de comprar el switch para el cooling fan pero no funcionó. Que modulo es la que tengo que programer.
El MSF with el programa DDDL
Thank you Francisco. ..
For Freightliner Cascadia 2016
Do I need to connect wire for the switch or just do the same way you did without wire ?
By the way I no have empty place in the Same place the one you showing in the video
I have eamty place up besides the trailer emergency brake
You don't have to run any wires if you have a empty slot. Do you have a extra switch panel on the central? Right?
3:32 in your video I see red wire side of the GPS exactly right there I have empty slot
Yes. You can install the switch there
Maher A
Good day to you Driver!!
Just bought a Use 2015 Cascadia Evolution,
Wanna ask you if you did ever install the Manual Fan Switch on your 2016 Cascadia?
Did it work? Any problems, issues?? Thanks in advance👍🏼
Did it work for your 2016
amigo tengo un freightliner cascadia 2013 sabes algo del sistema atc que se prendio fijo la lus roja
Traction control.
Posiblemente un llanta sea mas pequeña que las otras o tiene problemas en los sensors de Las ruedas
Como se hace para un 2012 cascadia
How do i do it in a 2012 cascadia
GREAT SIMPLE AND GOOD SOUND
+erick lopez
Probablemente para un 2012 va a tener que programar la computadora, pero puede probar solo instalando El switch en un espacio vacio
Francisco Amaya donde entry Fontana esta tengo in 2013 cascadia con Cummins question lie to power switch all fan
hi. i have 2014 cascadia evolution dd15 engine .. Will this switch work on my truck..?
It is possible, if not you will need to reprogram the ECM setting.
thank you for help..your videos are very helpful...
Hi I bought the switch for the fan but mine does not light up I have the Detroit software on my laptop what do I need to do to Activate it
Yes, go to the parameters and go to all parameters and go to MSF and you just need to know the switch location.
Francisco I have a 2010 cascadia and does. not have empty slots, it has two extra switch that have opt 1 and opt 2, what are this options for and what can those switches be use for? Thanks
+Manuel Flores
With The opt1 & opt2 switch you can connect different electrical option that you can add to the truck like fog lights, rear lights, aux fan, etc,..
The opt1 & opt2 have a 12 volts plugs on the back and there is a fuse in the fusebox to complete the circuit. however, you can remove one of those opt switch and place the fan switch instead because you have a 2010 Cascadia I believe it is going to work.
If it doesn't work on my cascadia. Can you program ecm in your shop?
No, I cannot set that parameter.
That is a dealer parameter only.
Can i install fan switch in 2013 cascadia without computer programming?
I think you need to do programming on that one but you can try
En mi 2013 freighliner cascadia si funcionara? Pero es un cummins engine .. ho eso no importa
En el Cummins se tiene que programar con el programa Cummins
Hello Francisco, I have a 2013 Cascadia. DD15. Do you think if I buy the switch and install it, it will work as is without programming the computer?
Sometimes it does.
Replacing the MSF sometimes makes it work too.
Francisco Amaya hi sir what is msf means thanks
Rolando Perez hi is this work with ur 2013 truck
Modular Switch Field
Ruvina Coca , hello, have not bought it yet. Wanted to make sure it works on mine before getting it.
Hola oye puse el swich y no prendio dondelo puesdo programar tu puedes y donde estas
No, no lo puedo programar.
Will it work in a cascadia with a 14.0l detroit
Maybe, they have similar systems.
I dont have a blank spot, but i do have a spot that i would rather get rid of
You can get an extra switch panel or remove one but you have to program the you remove and program the fan switch instead
Hey I have a freightliner cascadia that the signal lights dont want to work on trailer. I have changed the electrical cable and nothing. All lights work on trailer except the signals.
What can it be?
Also have code chs216 sid254 fail 03 can that be part of the problem
Thanks
+xDGKRivas22x
Open the hood and on the driver side by the steering column there is a fuse and relax box those are the ones than control the trailer illumination.
Check the fuses and if the fuses are fine check the relay s, if you want to test them just change the position of them to check them out.
The cover of the fuse box has a description of the fuse number and application.
which option need to change in parameters .should i onn or off something in parameters ?
You need the DDDL pro software to configure the fan program with the Ignition on.
hi I don't see any option like fan on egnition on pls help
Go to parameters and there is the option but you need the DDDL pro to program it. The conventional DDDL software won't allow it.
Instale uno pero me tiro unos codigos. Que luedo hacer?
Programar la computadora para que acepte el fan switch.
can u make a video how to do it in the Detroit Diesel software i cant find it on the software where u told me to do
Yes, I will do that.
I also have the DDDL Pro and I don’t see any tabs for the MSF. A step by step video on how to do this exactly would be great, hope you’re able to show us all, thanks Francisco!!!
Has anyone tried this on 2014?
I have the exact opposite happening with my unit. It's a 2010 cascadia and the engine fan won't shut off. What could be the problem? If I add this switch, can I shut the fan off manually? This is a real problem for me, because the fan running constantly is killing my mpg. Any ideas? Anybody..
It is possible that the fan solenoid is not working properly or the fan clutch is bad.
Check with a diagnostic tool to see if the power is being applied to the fan solenoid b
So can u have power to the switch and for the fan not to work?! Or if the button down have power it wont turn on at all
The slot has power, the only problem with be the computer programming.
lets ask the silly questons lol I have an 2013 cascade dd15 if I get the part and do what u just did you think ill work? I need that its getting hot already here in Houston!
Scerif83 hi bro is this work for u 2013 thanks
Actual part number is A06-53782-016
Hello Francisco, if you can help me please. I just got a code CA8 33. I looked for info and it mentioned that it has to do with the ABS but the ABS amber signal on the dash is off not lit. What could be the problem Sir. Thank you
My Semi is a 2013 Cascadia
No tiene otro codigo. Por que es no me da nada
I just did this on my 2014 cascadia and did not work for me
Switch light is on but fan clutch not coming on.
If your fan was never coming on before this switch will probably not fix it. You may have a short on the ground wire from your fan solenoid, or the solenoid may be bad.
How bout for a DD13?
It can work, just try and see.
Francisco Amaya do you have a shop I can get the switch installed? I'm in riverside... not to far from Fontana..
I haven't looked to far into it yet, on mine both of those switch banks are already full of other switches...
what other switch there is for the open other slot
+shyeem63
Traction control
Line alert
Sleeper speaker control
Manual fan override
Descent control
Etc,..
There many options you have for those two empty, it will vary depending on the truck application.
Francisco Amaya what does the line alert means?
+shyeem63
I am sorry, i wrote it wrong.
Lane alert or lane departure alert
It is a system to keep the truck on the road.
It will give you a warning when you are switching Lanes on the road.
Francisco Amaya OK thanks
what if i a one already but it stops working do i just replace it or is there something else i need to do
+Tony Ibarra
Yes, just replace the switch.
If replacing the switch doesn't not fix it you have a bigger problem with you communication interface.
Buenos dias yo tengo el engineering diagnostic link. Como puedo programar este switch?
En El msf en los parameters
Solo tiene que saber en que slot se encuentra El switch
hi can you tell me how can I change the parameter on the ecm or cpc ?
+ernesto garcia
You need a DDDL software or any diagnostic tool with parameters support to do the parameters programming.
Will this fan switch work with 2018 and 2017 cascadia..??
If you still have the 125 body, yes. If you have 126 body the process is a little different which I will show later.
@@franciscoamayaYT Thanks
can u just swap another switch? like the utility light switch?
+JechtTastic
Yes, you can try it.
No. The utility light switch is also a "Smart Switch". No matter where in the truck you put it, the MSF will always command the SAM Cab to turn the utility lights on and off.