hello, very good filming, it helped me, congratulations! my problem is that my water is leaking/losing. A part goes to the coffee and a part drains under the espresso machine, under the tray. Interesting isn't it? What could be the problem? Can you help me? Beautiful day!
hello, I think its coming from a rubber ring which its not more isolate/tighness, I got this problem from another Krups machine coffee, and the leak came just after the pump, because while it was working leak came out, otherwise when it s not working, there is nothing / no leak. May be it will help you, good luck.
Looking for some help and advise, have got the same machine but the steam wand seems to get jammed half way when it rises or drops. Anyone had the same problem and can maybe suggest a fix?
hi, may be you are talking about the nozzle, which its going up and down automatically, if its that, see here parts number ms-5a10166, if you know how, you should open and verify at least the motor if its turning properly, if nothing obstruct it, like a piece of bean coffee, or small piece of plastic, or completely your change the part. good luck
@@anwardsygn1805 thanks, I'll try to grab a video maybe of what happens when it gets stuck. I've looked for any obvious obstruction or something that could block the mechanism and because it does start to move I believe the motor still works fine. But any advice is definitely welcome.
You are a hero!! Thank you very much for your video the mill was clogged and I could get it out and clean it! 😍 Now it works again fine!
How do you fix a display which turned up being white, but you can still access its functions?
hello, very good filming, it helped me, congratulations! my problem is that my water is leaking/losing. A part goes to the coffee and a part drains under the espresso machine, under the tray. Interesting isn't it? What could be the problem? Can you help me? Beautiful day!
hello, I think its coming from a rubber ring which its not more isolate/tighness, I got this problem from another Krups machine coffee, and the leak came just after the pump, because while it was working leak came out, otherwise when it s not working, there is nothing / no leak. May be it will help you, good luck.
Looking for some help and advise, have got the same machine but the steam wand seems to get jammed half way when it rises or drops. Anyone had the same problem and can maybe suggest a fix?
hi, may be you are talking about the nozzle, which its going up and down automatically, if its that, see here parts number ms-5a10166, if you know how, you should open and verify at least the motor if its turning properly, if nothing obstruct it, like a piece of bean coffee, or small piece of plastic, or completely your change the part. good luck
@@anwardsygn1805 thanks, I'll try to grab a video maybe of what happens when it gets stuck. I've looked for any obvious obstruction or something that could block the mechanism and because it does start to move I believe the motor still works fine. But any advice is definitely welcome.