Hi CHeng, I come from Viet Nam, I would like to say thank you so much to your video. But i have a problem about BLEND SURFACE, i couln't do it the first face i can choose but the second one i can''t do it, please help me.
@@PJChenJewelryDesign Thanks! I found a trick, when I offset the surf, I delete the original surface and offset the new one back and the curve will be fixed and matching.
Hey PJ! I have a question I would like to ask.. is it possible to add finishes in rhino before casting or is it needed to do by hand? I'm making a piece similar to the one above and want the matte finish on the casing as well.. I hope all is well and would really appreciate an answer. Best regards, Lasse from Norway. Maybe you already have a video were you show it and you could refer me to.. I've sent you this message in a Instagram DM with the picture I'm talking about, my @ Lassiiq
Hi Lasse-Alexander, depends on the 3D printer quality. sometimes they have layering line on the wax or resin. it usually take some polishing effort to remove it. for the matte finish, you can have it done with sand blasting. However, you will need to polish it first then sand blasting. If the texture is not obvious like hair texture or bumpy texture. it usually go away on the polishing process.
How the f**k this channel has so little amount of subscribers? This is freaking best i've ever seen of tutorials. Thank you a lot PJ!
You are welcome Denis. Please share my channel!!
Thanks to you PJ, I'm learning a lot of things.
I love your mastery.
friendly
Vincent
Glad to help!
I never knew there was select points command . wow ! I learned something. Thanks a lot PJ Chen....
You are welcome
👍✌ Always much better videos
thanks
Very clear, I've learnt a lot. Thank you very much for your videos
You are very welcome Caroline.
Great video!
Thanks for the visit
Hi, always something new and faster to draw in Rhino. Thanks.
Welcome 😊
Realy nice tutorial
Glad you think so!
Thank you, you are a wonderful person
You are very welcome
You are a great teacher! Thanks
You are welcome Jeff!
great instruction of useful function! And make it into two solid for boolean is so smart~~ Thank You PJ :)
You are welcome !!
Thank you again.
my pleasure!
your amazing thnx alot
You're welcome!
U made it so easyly.. wow
I got few try first and figure out a easier way to put on video.
@@PJChenJewelryDesign thats great.. trying out of the book .. its awesome .. thanks again
Thanks
No problem
Amazing !! Thank you PJ !!!
You are very welcome.
Nice. Thank you very much pj
You are welcome !
you are the first in youtube
thanks!
very very nice thanks
Most welcome
Thanks a lot 😍😍
You're welcome 😊
Lovely
Thank you!
Thank you sir ♥️♥️♥️
You are welcome
nice pj
Thanks!
Hi CHeng, I come from Viet Nam, I would like to say thank you so much to your video. But i have a problem about BLEND SURFACE,
i couln't do it the first face i can choose but the second one i can''t do it, please help me.
I cannot help without seeing your model. You can email me at pj@pjchendesign.com with your 3dm model and a short description about the issue you had.
@@PJChenJewelryDesign Thank you so much for your response, I have found the way to fix it. Appreciate it.
thanks so much like other clips full of new creativity , would you please calla lily flower ring teach too ? please show how can calla Lily as ring ??
you can use flow along curve to flow it back to a circle.
Hi PJ, just wanted to thank you so much, your videos are helping me a lot with my studies in Architecture.
I am very happy to help.
GREATTTT
Thank you!
Hi, when I trim the surfaces then offset, the original surface edge is now broken up. How do I fix this so I can blend?
you may need to rebuild your curve before you make them into surface.
@@PJChenJewelryDesign Thanks! I found a trick, when I offset the surf, I delete the original surface and offset the new one back and the curve will be fixed and matching.
How did you get the polyline to snap to the end of the curves automatically? I had to drag the points together
Make sure your OSNAP is on and END POINT is checked
@@PJChenJewelryDesign Thank You so much!
wow
yeah!!
Wowhh PJ, great this video!! I learn again new commands!! I want to donate but I do not see the link. Can you send it to me?
goo.gl/eXvQtK here it is. thank you!
Sir how to make rose ring
I have several flower videos in different application on my channel. you can check them out.
@@PJChenJewelryDesign thank you sir
......
HELLO HOW CAN ACTIVATE THE PROPRTIES OF END MID
you need to make sure the Osnap is on first
@@PJChenJewelryDesign yes it is ok
Hey PJ! I have a question I would like to ask.. is it possible to add finishes in rhino before casting or is it needed to do by hand? I'm making a piece similar to the one above and want the matte finish on the casing as well.. I hope all is well and would really appreciate an answer. Best regards, Lasse from Norway.
Maybe you already have a video were you show it and you could refer me to.. I've sent you this message in a Instagram DM with the picture I'm talking about, my @ Lassiiq
Hi Lasse-Alexander, depends on the 3D printer quality. sometimes they have layering line on the wax or resin. it usually take some polishing effort to remove it. for the matte finish, you can have it done with sand blasting. However, you will need to polish it first then sand blasting. If the texture is not obvious like hair texture or bumpy texture. it usually go away on the polishing process.
Thank you so much PJ Chen!
Make up Pepople"s Faces
t-spline or clayoo. or zbrush will be a better app for face.
!!
^_^
Lovely
Thank you