Thanks for his well thought out video. Please I keep confusing the concept of selecting a sampling rate during analogue to digital conversion with sampling rate feature on the DAQ assistant configuration palette . do we need to consider the Nyquist Theory while deciding the sampling rate on the DAQ assistant just like in A to D conversion. Please share your thoughts on this. Thanks
Thanks for video. But I have a problem. I used your matlab code. When I rotate the potatiometer, the value chaneged 0 to 0.9 between. I used daqnavi 1710HG. It's support to analog and digital process. Do you have a recommend ?
hey, I have an arduino board(standard UNO). I need to diaplay the data acquired by the arduino on a labview setup. Can i do this without the interfacing unit ? will the labview system be able to read the data that is coming in serially from the arduino?
Your video does not include a hardware diagram or a schematic for the circuit you're showing. Not a good practice when trying to demonstrate or teach. Even if you components are simply, you should all way provide a guide to show how their physically connected, i.e., anode versus cathode for the LED, where wires are connected for potentiometer, where wires connect at NI USB-6008, etc.
Thanks for your feedback. I did this tutorial 10 years ago, and I was new to RUclips tutorials. If you checkout my recent tutorials, you’ll see everything is well documented. Thanks again.
@@AnasKuzechie I didn't notice the date. Do you remember how you had everything connected. I need to start working with NI DAQ at work and thought this would be a good start.
Thank you so much... it is really an easy explaination with understandable language...
fantastic
i never thought it is so easy..........
Great video Dr Anas, your videos are very helpful, Keep it up, A link to order the DAQ would be appreciated, thanks
Very useful, thank you!
Thanks for his well thought out video. Please I keep confusing the concept of selecting a sampling rate during analogue to digital conversion with sampling rate feature on the DAQ assistant configuration palette . do we need to consider the Nyquist Theory while deciding the sampling rate on the DAQ assistant just like in A to D conversion. Please share your thoughts on this. Thanks
thank you
Thanks for video. But I have a problem. I used your matlab code. When I rotate the potatiometer, the value chaneged 0 to 0.9 between. I used daqnavi 1710HG. It's support to analog and digital process. Do you have a recommend ?
السلام عليكم لدي daq ni-6009 وارغب بقراءة درجة الحرارة من خلال ثرموكبل حاولت ولم اتمكن هل يجب اضافة مكبر ad595 على سبيل المثال مع جزيل الشكر
Like 618 👏👏👏👏👏
great Video Dr.Anas
BTW, i uploaded 2 videos for Labview
Great, can you give tutorial about labview with arduino?
I did this video more than a decade ago when I had the hardware and the software. Thanks for the feedback.
I am aware this is an old video. I am using the NI cDAQ-9174 with the NI 9214 Thermocouple input module. Can you help with that?
hey, I have an arduino board(standard UNO). I need to diaplay the data acquired by the arduino on a labview setup. Can i do this without the interfacing unit ? will the labview system be able to read the data that is coming in serially from the arduino?
Hey i am trying to measure temperature with thermocouples using a homemade DAQ hardware? Will it work with Lab View without drivers?
merci pour
does we need to install driver first for DAQ or it just plug and play
very usefull..............
Hi there, may I know how do I get the DAQ Assistant appear on the express VI Function panel?
www.ni.com/download/ni-daqmx-14.2/5046/en/
my regard for you
Your video does not include a hardware diagram or a schematic for the circuit you're showing. Not a good practice when trying to demonstrate or teach. Even if you components are simply, you should all way provide a guide to show how their physically connected, i.e., anode versus cathode for the LED, where wires are connected for potentiometer, where wires connect at NI USB-6008, etc.
Thanks for your feedback. I did this tutorial 10 years ago, and I was new to RUclips tutorials. If you checkout my recent tutorials, you’ll see everything is well documented. Thanks again.
@@AnasKuzechie
I didn't notice the date. Do you remember how you had everything connected. I need to start working with NI DAQ at work and thought this would be a good start.
@@jeff8794 I can add link in the description to circuit diagram
@@jeff8794 I can add link in the description to circuit diagram
@@jeff8794 You can find a link in the description to access the circuit diagram. Again, thanks for your feedback.