Это видео недоступно.
Сожалеем об этом.

Air Ballance HVAC 29-0

Поделиться
HTML-код
  • Опубликовано: 15 авг 2024

Комментарии • 29

  • @designereats3661
    @designereats3661 2 года назад +2

    Please keep making more videos. This is helpful!

  • @hvac01453
    @hvac01453 3 года назад +6

    also, these returns should never be connected to the return air system, but rather, be designated as exhaust. Keeping in mind that all exhaust must be made up.

    • @rezamohammadi956
      @rezamohammadi956 2 года назад +1

      And we must install filters in the way to atmosphere too.

    • @hvac01453
      @hvac01453 Год назад

      I didn't know that...

  • @grivas1161
    @grivas1161 3 года назад +2

    Great vid Marty but be advised that per FGI Guidelines / ASHRAE and every State code i know, Laboratories must be designed to have negative pressure, not positive.

  • @shkwaseem1571
    @shkwaseem1571 7 лет назад +5

    This is it
    you did best
    you explained simple but the knowledge were more in this video
    thank-you

  • @lgg6email871
    @lgg6email871 4 года назад

    Very useful & Easy to understand

  • @bjornosterlund9354
    @bjornosterlund9354 4 года назад

    Nice and instructive video, I hope I can use the part since we manufacure monitoring systems for this aplication I really liked the simplicity

    • @MartyHuie
      @MartyHuie  4 года назад

      Not sure what you’re asking, thank you for the compliment

  • @grfrjiglstan
    @grfrjiglstan 2 года назад

    Boy, this aged well.

  • @Khaledajarrar
    @Khaledajarrar 4 года назад

    Perfect explanation thank you

  • @bakytorazymbet3690
    @bakytorazymbet3690 2 года назад

    Thanks a lot
    But I think last two schemes are confused

  • @MartyHuie
    @MartyHuie  6 лет назад

    I am just an architect. That is left up to my team. This is just a big pitcher look so arch. can understand what to look for

  • @karinamiranda3887
    @karinamiranda3887 7 лет назад +2

    Good

  • @MartyHuie
    @MartyHuie  8 лет назад +1

    1st of all I read this on my phone and meant to come back and reply and forgot, sorry
    LOL LOL Sorry for LOL but that is way over my head. I am not a Mechanical engineer only an architect, the video was basically really for architects understanding what their engineers are doing. Architects have to answer to clients many times on cost and wanting to make sure everyone understands where dampers go also
    My initial thought on your question, is I don't believe you're allowed to have return air in isolation, it should be exhausted we do not want to contaminate other people with the airborne illness of the person in the room. Now for talking positive pressure i.e. the room needs to be cleaner than the corridor I don't know that answer for sure with a positive pressure room you could return the air but a negative pressure room I believe it needs to be hundred percent exhausted

    • @shkwaseem1571
      @shkwaseem1571 7 лет назад

      In the hospitals
      the The return air totally goes to air but through the lowers which filters the air HEPA filters are used
      first thing why you r watching this video as you said your not from technical field

  • @hvac01453
    @hvac01453 3 года назад +1

    would just like to note you used a return symbol for the supply @5:17, otherwise great info especially with Covid19 as a concern.

  • @Eggemeyers
    @Eggemeyers 3 года назад

    Is that a Lamy fountain pen?

  • @anshusingh8898
    @anshusingh8898 6 лет назад

    SIR THANKS FOR THIS VIDEO.
    I Want to know about how measured the duct size and its area.

  • @yashaswiniengineeringservi7296
    @yashaswiniengineeringservi7296 5 лет назад

    thank you sir

  • @sumitdubey8963
    @sumitdubey8963 6 лет назад

    Is it any book which is good in air balance

  • @nholdrcflyingandtouradvent9009
    @nholdrcflyingandtouradvent9009 8 лет назад

    hi what was the ratio of CFM needed if I had a 100% return air to cool a certain room, specially for isolation room application for both positive and negative.

    • @deepanshusharma9776
      @deepanshusharma9776 8 лет назад

      +Arnold Villamin : hey hi arnold may i know what ratio you are talking about. Because if you have 100 % return then your equipment will cool the air. and if you are asking that how much fresh air do we need to create the positive or negative pressure then i know the ans.

    • @nholdrcflyingandtouradvent9009
      @nholdrcflyingandtouradvent9009 8 лет назад

      Oh yes my package was a 100% fresh air return. What was my CFM ratio per square meter.

  • @sumitdubey8963
    @sumitdubey8963 6 лет назад

    Hello sir, Could you tell me how to calculate how much air suck from room to create negative pressure in room

    • @MartyHuie
      @MartyHuie  6 лет назад

      it needs to be more than what your supplying. what is your test & balance report shows and the supply and return air for that space

  • @alexv5229
    @alexv5229 3 года назад

    Do you guys make good money doing this for a living???

    • @MartyHuie
      @MartyHuie  3 года назад

      Not sure what you’re asking. It’s only one person, me doing the videos as I learn things or as I have to explain things to colleagues. And no I do not make any money off of these videos I will if I do it’s pennies. They are RUclips monetized but literally I probably make $50 a year from RUclips. Why are you asking is this a joke? :-)

  • @TanweerAhmed
    @TanweerAhmed 4 года назад

    Good