Here I translated the Hindi to English because I could not find another good video in English. Transcript 0:14 Hello welcome to my channel, you guys can see 0:17 This is the g3060 model of the channel, in this 0:20 The problem is that a blank page prints out 0:23 It happens because there is no ink impression, so this 0:27 When does the problem occur? When the cartridge gets dry. 0:30 At that time a black page is printed. 0:33 You guys can see here that the ink tube. 0:37 There is no ink in it either. 0:40 The ink tank is there, from the ink tank to the cartridge 0:45 Ink is not passing due to which 0:47 Black patches are being printed 0:49 So first of all let's turn on the printer 0:53 Let's do that We You guys are seeing this document 1:11 Here we will print this document 1:14 1:32 See blank page print out 1:34 So today in this video we will see that 1:38 If your printer has blank print then how 1:42 How do we solve it First of all you have to turn off the printer 2:18 now we have to bring ink in the ink tube in it, you can do this process in the printer 2:24 by going to maintenance 2:27 but the problem is that it has a wipe system 2:31 in it, if you flush or hang the printer too much then at that time the ink absorber gets full 2:40 quickly so when you charge most of the ink gets wasted and the waste 2:47 your waste gets accumulated in the pad and the 2:50 waste pad gets full quickly 2:53 so we will fix it manually 2:58 3:00 this is ink lock, you have to keep the ink First 3:03 First of all you have to lock it, okay 3:08 Lift the carriage like this 3:12 3:54 Earlier there was no ink on the ink tube, now the ink is there 3:58 4:07 After you have properly placed the carriage 4:10 You have to lower it and just after that you have to open the 4:13 locks that you have locked, otherwise if 4:17 You open the ink lock 4:20 without locking the cartridge garage, then the ink 4:23 will automatically go back 4:28 4:31 We have brought the ink in the pipe, after that you have to 4:33 clean the head only once, so 4:36 You can see the process of this here But 4:39 See, you can see the settings button 4:41 It is there, you have to press it once, after that 4:44 You have to go to maintenance 4:46 After maintenance is done 4:50 You will get a nasal check, right after that you will 4:53 get the cleaning option, after that 4:56 You have to clean the printer, see 4:57 It is being cleaned automatically 5:01 It will take you about two minutes for the cleaning 5:16 Look here, our cleaning is complete 5:19 Now the same document is gone, we will print the same 5:23
I did the Maintenance "Deep Cleaning" twice and then did an 'Ink Flush' and it worked great after that. No hypodermic syringe needed. NO messing around with ink tubes or syringes is a big benefit. The printer did not come with a syringe, so I preferred not to buy one.
Here I translated the Hindi to English because I could not find another good video in English.
Transcript
0:14
Hello welcome to my channel, you guys can see
0:17
This is the g3060 model of the channel, in this
0:20
The problem is that a blank page prints out
0:23
It happens because there is no ink impression, so this
0:27
When does the problem occur? When the cartridge gets dry.
0:30
At that time a black page is printed.
0:33
You guys can see here that the ink tube.
0:37
There is no ink in it either.
0:40
The ink tank is there, from the ink tank to the cartridge
0:45
Ink is not passing due to which
0:47
Black patches are being printed
0:49
So first of all let's turn on the printer
0:53
Let's do that We
You guys are seeing this document
1:11
Here we will print this document
1:14
1:32 See blank page print out
1:34 So today in this video we will see that
1:38 If your printer has blank print then how
1:42 How do we solve it
First of all you have to turn off the printer
2:18
now we have to bring ink in the ink tube in it,
you can do this process in the printer
2:24
by going to maintenance
2:27
but the problem is that it has a wipe system
2:31
in it, if you flush or hang the printer too much then at that time the ink absorber gets full
2:40
quickly
so when you charge most of the ink gets wasted and the waste
2:47
your waste gets accumulated in the pad and the
2:50
waste pad gets full quickly
2:53
so we will fix it manually
2:58
3:00
this is ink lock, you have to keep the ink First
3:03
First of all you have to lock it, okay
3:08
Lift the carriage like this
3:12
3:54
Earlier there was no ink on the ink tube, now the ink is there
3:58
4:07
After you have properly placed the carriage
4:10
You have to lower it and just after that you have to open the
4:13
locks that you have locked, otherwise if
4:17
You open the ink lock
4:20
without locking the cartridge garage, then the ink
4:23
will automatically go back
4:28
4:31
We have brought the ink in the pipe, after that you have to
4:33
clean the head only once, so
4:36
You can see the process of this here But
4:39
See, you can see the settings button
4:41
It is there, you have to press it once, after that
4:44
You have to go to maintenance
4:46
After maintenance is done
4:50
You will get a nasal check, right after that you will
4:53
get the cleaning option, after that
4:56
You have to clean the printer, see
4:57
It is being cleaned automatically
5:01
It will take you about two minutes for the cleaning
5:16
Look here, our cleaning is complete
5:19
Now the same document is gone, we will print the same
5:23
Super Bro
Thank you 🙏
I did the Maintenance "Deep Cleaning" twice and then did an 'Ink Flush' and it worked great after that.
No hypodermic syringe needed.
NO messing around with ink tubes or syringes is a big benefit. The printer did not come with a syringe, so I preferred not to buy one.