If you want additional information for any head strap in this video, I have links to my FULL REVIEW videos for each of them linked in the description. I hope this video helps you decide on a Quest head strap! 😁 I left a link to my comparison guide spreadsheet in the description as well.
I've tried the Globular Cluster F3 and AMVR Q3FC1. I prefer the F3 - the magnetic design is very nice to easily remove when you want to use the S3 Pro in a halo-style setup.
@@ThisKory hi! I'm gonna get a quest 3s, but the thing is that i don't have the money for a strap with battery. So should i get the quest 3s with the strap no battery or the quest 3s with a cable link?
Nice peekage section, I have wanted a flip up strap for a long time but as I wear glasses I was cautious about them getting in the way for the flip up to work, but that kkcobvr with the extra dial makes me wonder if it would be more glasses friendly if it can slide forward enough to avoid snagging.
I would invest in VR lens inserts long before I purchase a head strap for glasses. If you cannot use VR lens inserts for some odd reason, then the KKCOBVR strap is your best bet.
@ThisKory Great Video Kory! Seriously man, very helpful! I made sure to sub and like the video, I would have hit the bell but for some reason there wasn't one. So I probably should have done a little more research, but I already bought the BoboVR S3 Pro because everywhere I read said it was the best, and even after watching your video I still believe that to be true. But I probably would have went with the KKCOBVR Q3 Pro due to the flip up design, and it also has a hot swapable 10,000 mah battery like the S3 Pro does. It also is $30 less than the S3 Pro as well. My S3 Pro will be here Tuesday, so I guess worse case if I don't like it I can return it and buy the KKCOBVR Q3 Pro. But I'm sure it will be fine. Anyways, thanks again for the great video! Can't wait to see more from you!
@ Thank you so much for the kind words, they really do mean a lot to me 💜 Thank you. You should have the S3 Pro today, so I am curious to hear your thoughts on it! You can't go wrong with either one.
Not sure if they have since changed the design but my recently purchased KKCOBVR does not articulate anything like yours at that joint. It requires a LOT of force to flip it up. So much so that it is easier to just take it off.
Nice video and very informative! Have you tried the Kiwi design H4? What do you think about that one? I'm gearing towards the KKCOBVR because of the fit but the the Globular Cluster is also appealing because of the interchangeable materials, I have over the ear headphones that I use that have that same PU leather finish as most of the pads on most headstraps and as time passes, that material starts to peel off, what has been your experience with durability on materials? the globular cluster one is appealing to me because if a pad wears out, you have a couple more to just change it. Still, I'm gonna purchase my first headset ever being the quest 3 and I still don't know which headstrap to get hahah. Also there's a KKCOBVR facial interface that has a fan, how would you compare the S3 Pro vs the KKCOBVR with the fan interface? they would have kind of the same features and price point. Thanks!
Hey thanks for the kind words! I appreciate that a lot. I have not tried the Kiwi H4, and only have experience with their non-battery K4 design. I like Kiwi Design products, they seem pretty solid, and I've heard good things about their battery-strap models as well. The PU leather material will degrade over time, this is inevitable. Wiping down the material after each use will preserve its life, but these materials will not last a lifetime - but they only really need to last 4-5 years, which is probably as long as you'll keep the HMD around before upgrading, anyway. That being said, I do not have any issues with any of the PU leather pads on any of the straps I have and use. I've had a VR Cover for my Index for 4 years and it is still looking and feeling as good as new. Again, making sure to wipe it down after each use helps to increase the material longevity, and giving it a deeper clean with a little water, a cloth, and some time, will go a long way to ensure you can continue to use these head straps for years. Of course, some materials may degrade sooner, but all of mine have been fine. I personally like the S3 Pro, their ecosystem is becoming more robust with their charging dock, controller grips that work with the dock, and a facial interface soon. Their products have been more expensive than most, for sure, but they seem to meet the quality to justify the cost in many ways, with the digital displays, and fan, among other details which just make it an easy head strap to recommend. That being said, the KKCOBVR unit is super nice, and I actually find it more comfortable on my head because it grips the front of my head much better, creating a more stable and secure strap. Globular Cluster is great if you have multiple users because you can use separate materials so you're not sharing the sweaty pads with one another. I love their facial interface (F3) because of its magnetic design, and the same reason I enjoy their head straps, because they provide you with multiple materials and interfaces to quickly swap them out. I have not tried the KKCOBVR interface, so I cannot comment on that, but it seems cool! So, I'd say the S3 Pro if you want a nice well rounded strap, KKCOBVR if you want the flip-up design with a more narrow halo design that cups your forehead better, or the Globular Cluster if you are sharing the headset and want to swap out materials. They're all good, you just gotta decide what you prioritize here, and go with your gut haha. Hope this helps!
@@ThisKory Wow man really appreciate it, you really went above and beyond with your answer to my question with this reply, thank you so much, I will check them out again in your video and decide with my gut then hahahaha, really really appreciate it! have a great day!
HonsVR. They're the thinnest magnetic option that I've tested, and offer a wide spectrum of prescriptions. You reminded me, I've been meaning to compare all of the lens inserts I have as well, in a similar video fashion.
I'm gonna get a quest 3s, but the thing is that i don't have the money for a strap with battery. So should i get the quest 3s with the strap no battery or the quest 3s with a cable link?
This depends on how you will be using the Quest 3S. The Quest 3S can be used wirelessly connected to your PC, or via a link cable. Most users find wireless to be best for visuals, but you also need to ensure you have a fast router (6e is preferred), and a video card to support the encoding. There are far too many variables to give you a direct answer. Although I would definitely get a head strap for the 3S, as the default strap is pretty terrible, giving pressure points from the large plastic blocks on the back, and leaving the headset feeling unbalanced and awkward. A head strap should be a priority when getting a Quest, so that's my vote. However, if you're using it wireless, then you will also want a battery.. so, maybe save up a bit longer and get a head strap with a battery if you're going that route.
I only included battery straps in this comparison video, to keep things a little more comparable. I do have the K4, and I am uploading the BOBOVR E3 Pro review as I type this out 😁 I plan to make a video comparing all non-battery straps at some point, but I do not have many, and most users will prefer a battery, so I prioritized making this video first. Thanks for hanging out!! Cheers!
The K4 Boost is a battery strap, yes, but I have the K4 Comfort strap which does not have a battery. The E3 Pro is also a battery strap, but I did not receive it until after this video was completed, so it was not added in this comparison guide. This was discussed near the end of this video, but I don't expect everyone to have seen that 😅
@@davescott7680 here’s the thing, I need it so I can run eyetrackvr hardware and project babble hardware at the same time. Both of those use usb 2.0 for power. In the current state of things right now, it’s either I have it connected via Link Cable for PCVR to only power the headset or I use Virtual Desktop on the Quest 3 and use the USB port to power both ETVR and PB.
Hmm.. gonna be honest, I don't use grips enough to have a favorite, simply because I use the Maecker charging dock which doesn't allow for grips due to the battery panels needing to be exposed for the terminal connectors to charge. Whatever grips you choose, just make sure they have a locking mechanism to the battery slot so the controllers don't fly out from the grips - and make sure they're actually locked in properly, as some can be difficult to get to lock properly.
BOBOVR has a dock that comes with grips that work with it. It's a solid option for sure, especially if you're already invested in the BOBOVR ecosystem because it charges up their head strap batteries as well. Thank you so much for the kind words, it really means a lot 🙏
@ was looking at that but the lack of facial interface support for most third party options is disappointing and I don’t think the globular cluster f3 fits
Ah yeah, unfortunately I did not receive an H4 for review at this time. I did, however, get a chance to try and review the K4 from Kiwi Design, which is a good strap. In this video I wanted to only compare battery straps, so the K4 was not on the list. Although, I do have all of the non-battery straps I tested on my spreadsheet that's linked in the description - I'm still working on that section though.
You didn't compare one of the most important things on these, and that's how well they can be adjusted to block out light. Nothing is more immersion breaking than having visible light coming in from the sides or from the nose area when playing VR games.
@ Thanks! Alright, gonna check them out! I use the official Meta silicone facial interface, but I noticed that light is leaking from the nose area with that one.
If you want additional information for any head strap in this video, I have links to my FULL REVIEW videos for each of them linked in the description. I hope this video helps you decide on a Quest head strap! 😁 I left a link to my comparison guide spreadsheet in the description as well.
What’s your favourite facial interface for halo straps mainly the bobo s3
I've tried the Globular Cluster F3 and AMVR Q3FC1. I prefer the F3 - the magnetic design is very nice to easily remove when you want to use the S3 Pro in a halo-style setup.
@@ThisKory ok thanks
The best head strap video that I've seen! I can't wait to see more of your content, great job man
Thank you! 🙏
@@ThisKory hi! I'm gonna get a quest 3s, but the thing is that i don't have the money for a strap with battery.
So should i get the quest 3s with the strap no battery or the quest 3s with a cable link?
Your videos sure help a lot of people that want to dive into the whole VR experience 👍
Exactly the video I needed and EXACTLY when I needed it lol
So glad to help!! ✌️🙏
Great review I believe I'm gonna go watch your full review on the S3 pro then probably pick that one up
Question here. Should i connect extra battery to quest when quest battery at 30% or at 100%?
Nice peekage section, I have wanted a flip up strap for a long time but as I wear glasses I was cautious about them getting in the way for the flip up to work, but that kkcobvr with the extra dial makes me wonder if it would be more glasses friendly if it can slide forward enough to avoid snagging.
I would invest in VR lens inserts long before I purchase a head strap for glasses. If you cannot use VR lens inserts for some odd reason, then the KKCOBVR strap is your best bet.
@ThisKory Great Video Kory! Seriously man, very helpful! I made sure to sub and like the video, I would have hit the bell but for some reason there wasn't one.
So I probably should have done a little more research, but I already bought the BoboVR S3 Pro because everywhere I read said it was the best, and even after watching your video I still believe that to be true. But I probably would have went with the KKCOBVR Q3 Pro due to the flip up design, and it also has a hot swapable 10,000 mah battery like the S3 Pro does. It also is $30 less than the S3 Pro as well.
My S3 Pro will be here Tuesday, so I guess worse case if I don't like it I can return it and buy the KKCOBVR Q3 Pro. But I'm sure it will be fine.
Anyways, thanks again for the great video! Can't wait to see more from you!
@ Thank you so much for the kind words, they really do mean a lot to me 💜 Thank you.
You should have the S3 Pro today, so I am curious to hear your thoughts on it! You can't go wrong with either one.
@ThisKory I'm loving the S3 Pro, it's extremely comfortable, and the battery life is outstanding! I'm glad I decided to go with the S3 Pro for sure!
Not sure if they have since changed the design but my recently purchased KKCOBVR does not articulate anything like yours at that joint. It requires a LOT of force to flip it up. So much so that it is easier to just take it off.
Nice video and very informative! Have you tried the Kiwi design H4? What do you think about that one? I'm gearing towards the KKCOBVR because of the fit but the the Globular Cluster is also appealing because of the interchangeable materials, I have over the ear headphones that I use that have that same PU leather finish as most of the pads on most headstraps and as time passes, that material starts to peel off, what has been your experience with durability on materials? the globular cluster one is appealing to me because if a pad wears out, you have a couple more to just change it. Still, I'm gonna purchase my first headset ever being the quest 3 and I still don't know which headstrap to get hahah. Also there's a KKCOBVR facial interface that has a fan, how would you compare the S3 Pro vs the KKCOBVR with the fan interface? they would have kind of the same features and price point. Thanks!
Hey thanks for the kind words! I appreciate that a lot.
I have not tried the Kiwi H4, and only have experience with their non-battery K4 design. I like Kiwi Design products, they seem pretty solid, and I've heard good things about their battery-strap models as well.
The PU leather material will degrade over time, this is inevitable. Wiping down the material after each use will preserve its life, but these materials will not last a lifetime - but they only really need to last 4-5 years, which is probably as long as you'll keep the HMD around before upgrading, anyway. That being said, I do not have any issues with any of the PU leather pads on any of the straps I have and use. I've had a VR Cover for my Index for 4 years and it is still looking and feeling as good as new. Again, making sure to wipe it down after each use helps to increase the material longevity, and giving it a deeper clean with a little water, a cloth, and some time, will go a long way to ensure you can continue to use these head straps for years. Of course, some materials may degrade sooner, but all of mine have been fine.
I personally like the S3 Pro, their ecosystem is becoming more robust with their charging dock, controller grips that work with the dock, and a facial interface soon. Their products have been more expensive than most, for sure, but they seem to meet the quality to justify the cost in many ways, with the digital displays, and fan, among other details which just make it an easy head strap to recommend.
That being said, the KKCOBVR unit is super nice, and I actually find it more comfortable on my head because it grips the front of my head much better, creating a more stable and secure strap.
Globular Cluster is great if you have multiple users because you can use separate materials so you're not sharing the sweaty pads with one another. I love their facial interface (F3) because of its magnetic design, and the same reason I enjoy their head straps, because they provide you with multiple materials and interfaces to quickly swap them out.
I have not tried the KKCOBVR interface, so I cannot comment on that, but it seems cool!
So, I'd say the S3 Pro if you want a nice well rounded strap, KKCOBVR if you want the flip-up design with a more narrow halo design that cups your forehead better, or the Globular Cluster if you are sharing the headset and want to swap out materials.
They're all good, you just gotta decide what you prioritize here, and go with your gut haha. Hope this helps!
@@ThisKory Wow man really appreciate it, you really went above and beyond with your answer to my question with this reply, thank you so much, I will check them out again in your video and decide with my gut then hahahaha, really really appreciate it! have a great day!
what are you favourite lens inserts
HonsVR. They're the thinnest magnetic option that I've tested, and offer a wide spectrum of prescriptions. You reminded me, I've been meaning to compare all of the lens inserts I have as well, in a similar video fashion.
@ thanks
VR Optician. Hands down the best quality.
I'm gonna get a quest 3s, but the thing is that i don't have the money for a strap with battery.
So should i get the quest 3s with the strap no battery or the quest 3s with a cable link?
This depends on how you will be using the Quest 3S. The Quest 3S can be used wirelessly connected to your PC, or via a link cable. Most users find wireless to be best for visuals, but you also need to ensure you have a fast router (6e is preferred), and a video card to support the encoding.
There are far too many variables to give you a direct answer. Although I would definitely get a head strap for the 3S, as the default strap is pretty terrible, giving pressure points from the large plastic blocks on the back, and leaving the headset feeling unbalanced and awkward. A head strap should be a priority when getting a Quest, so that's my vote. However, if you're using it wireless, then you will also want a battery.. so, maybe save up a bit longer and get a head strap with a battery if you're going that route.
@@ThisKory thanks for answering ! i'll get a battery headstrap 👍
I wish you had added some more elite style straps like the Kiwi K4 boost or Bobovr E4. Both are elite styled battery straps
I only included battery straps in this comparison video, to keep things a little more comparable. I do have the K4, and I am uploading the BOBOVR E3 Pro review as I type this out 😁
I plan to make a video comparing all non-battery straps at some point, but I do not have many, and most users will prefer a battery, so I prioritized making this video first.
Thanks for hanging out!! Cheers!
@ThisKory I thought the K4 boost and E3 were battery straps?
The K4 Boost is a battery strap, yes, but I have the K4 Comfort strap which does not have a battery.
The E3 Pro is also a battery strap, but I did not receive it until after this video was completed, so it was not added in this comparison guide. This was discussed near the end of this video, but I don't expect everyone to have seen that 😅
Can you use a head strap with a battery if you are also using a wired link to your PC?
Yes you can use one, but because the link cable will be occupying the USB-C port on your headset, the battery will be ineffective.
@@ThisKory Thanks, that was what I was wondering. I thought maybe the head strap had a bypass, but I guess not.
@@ThisKoryhas anyone tested to see if they can get a usb-c splitter cable so it’s possible to do both or not?
@@bzavacadoif you have the headset plugged I to PC it'll charge via the cable. It doesn't need both.
@@davescott7680 here’s the thing, I need it so I can run eyetrackvr hardware and project babble hardware at the same time. Both of those use usb 2.0 for power. In the current state of things right now, it’s either I have it connected via Link Cable for PCVR to only power the headset or I use Virtual Desktop on the Quest 3 and use the USB port to power both ETVR and PB.
What are your favourite quest 3 grips
Hmm.. gonna be honest, I don't use grips enough to have a favorite, simply because I use the Maecker charging dock which doesn't allow for grips due to the battery panels needing to be exposed for the terminal connectors to charge.
Whatever grips you choose, just make sure they have a locking mechanism to the battery slot so the controllers don't fly out from the grips - and make sure they're actually locked in properly, as some can be difficult to get to lock properly.
@@ThisKory ok can’t wait to see more of your content you are a underrated vr RUclipsr
@ are there any grips that work with the dock
BOBOVR has a dock that comes with grips that work with it. It's a solid option for sure, especially if you're already invested in the BOBOVR ecosystem because it charges up their head strap batteries as well. Thank you so much for the kind words, it really means a lot 🙏
@ was looking at that but the lack of facial interface support for most third party options is disappointing and I don’t think the globular cluster f3 fits
flip the dang cable around to loop it up and over!
Actually Annapro and M3 Pro has smallest, M3 Pro has 19 Wh and Annapro 20 Wh KKCOBVR might have largest capacity battery 37 Wh capacity.
No kiwi headstraps on this list? Kiwi is one of the best headstrap manufacturers
Great video. I was wondering about this too. No K4, H4 or Meta Elite?
Ah yeah, unfortunately I did not receive an H4 for review at this time. I did, however, get a chance to try and review the K4 from Kiwi Design, which is a good strap. In this video I wanted to only compare battery straps, so the K4 was not on the list. Although, I do have all of the non-battery straps I tested on my spreadsheet that's linked in the description - I'm still working on that section though.
@@ThisKoryK4 Boost would fall into that category.
You didn't compare one of the most important things on these, and that's how well they can be adjusted to block out light. Nothing is more immersion breaking than having visible light coming in from the sides or from the nose area when playing VR games.
Light leakage has nothing to do with the head strap, and everything to do with the facial interface. This video is not about facial interfaces.
@ Okay, sorry for my lack of information then. Just got my first VR headset (Q3). Will you be doing facial interface reviews as well?
I have 2 reviews up for interfaces. I have a playlist for them I believe - the Globular Cluster F3 and the AMVR Q3FC1. Grats on the Quest 3!!
@ Thanks! Alright, gonna check them out! I use the official Meta silicone facial interface, but I noticed that light is leaking from the nose area with that one.