Это видео недоступно.
Сожалеем об этом.
Unbrick Xiaomi Redmi 9(Lancelot)/Redmi Note 9(Merlin) Hardbricked
HTML-код
- Опубликовано: 22 апр 2021
- -miui fastboot rom firmware:
(redmi 9 lancelot)
xiaomifirmware...
mifirm.net/mod...
(redmi note 9 merlin)
xiaomifirmware...
mifirm.net/mod...
-mtk bypass tool:
drive.google.c...
-miflashpro:
miflashpro.com/
-python 3.8.6(windows 7 64bit):
www.python.org...
-skrip cmd python:
pip install pyusb pyserial json5
Alhamdullilah bang! Problem semua dh selesai dan dh ikut semua step yang abang bagi menag wort it lah! Hp saya ni dh nk dekat 3 bulan hard brick terpaksa lah beli hp baru.. Sekarang dh boleh on balik.. Berkat video dan tunjuk ajar abang, semoga mempermudahkan urusan hidup dan sentiasa berada di kalangam orang yang beriman! Aaamin
Ih aku ku bawa ke konter
Bro u save my day! literally! lots of love have a good day as well....many many thanks 😍💖💖💖💖
makasih banyak pak atas videp ini hp saya kembali kalau pingin coba pahami dengan ditaill dan harus sama semangat ye yang hp nya hampir hardbrick ok
thx bro konten lo bermanfaat banget
Alhamdulillah berhasil bang, workk 100% bangget tutorialnya, dari sekian bnyk tutor, ini yg paling gampang, dan sesudah berhasil tapi imeinya ilangg, tapi sekatang udh ada lgii, mksih pakk tutorialnya sanggat bermanfaat dalam dari indonesiaa
Thanks from Argentina, it's hard but step by step works🎉😅. I love u❤
Alhamdulillah berjaya bro..
terima kasih banyak2 ajarkan.
Smoga dipermudahkan segala urusan.
Thank you my big brother, it is not enough to thank you but I will always remember you for helping me a lot. May God fulfill your wishes.
And thank you once again ❤
Jajakallahu khairan ❤❤❤, it's work for me
Terima kasih banyak kerana berkongsi maklumat berharga. Terima kasih kepada anda, saya membuka telefon saya, yang tidak menyala, dan saya menggunakannya. Saya berjaya 100% dengan menonton video ini, terima kasih lagi dan lagi
Thank you, I followed the steps and I was able to revive my phone.
I don't Speak hindi, but Bro you actually saved my phone's life! Thank you
Alhamdulillah ini kedua kalinya saya mencobanya,work semua saya ucapkan terima kasih kepada abang.Semoga dipermudahkan segaa urusan.Terima kasih banyak.
Thx bang semuanye berjalan dengan lanca dan fon saye sudah kembali operate seperti biasa..
n new sub for ya..
Thank you so much, Mohd! All the best to you.
tq bang, jujur hampir putus asa dan hampir hantar ke xiaomi center. Alhamdulillah berhasil setelah beberapa kali try. thank you banyak banyak bang
Thank you a lot, your instructions saved my phone.
this tutorial wasn't working for me, I was getting stuck to reading memory.
I disabled windows security and changed my bios setting to legacy.
works in 2023 !!
thanks bro.
thank you bang dari banyaknya tutorial di youtube cuman ini yang berhasil akhirnya bisa pake hp ini lagi alhamdulilah kapok ngeroot lagi 🤣
Siapa pun kamu dan dimana pun kamu berada, saya hanya bisa berterimakasih kepada kamu sekali lagi terima kasih mohd kusyaire tutorial nya membantu sekali
terima kasih banyak broo akhirnya saya bisa kembali, saya praktekan pada redmi 9a, menggunakan firmware redmi9a,.... terima kasih banyak
I just had it and thanks for your video, thank you very much.
tried so many times with other tutorials, failed & bought a new phone.
finally able to solve following exactly this video. thanks.
N.B. it would be better if the subtitle language is in English.
can you help to unbrick my redmi note 9? plz
terima kasih bang, solved parah
sukses selalu
Thanks for this video! ❤️
Please give a note in description that this only works on Mi Flash Pro Version 5, as I tried using latest version that is 7, but it didn't work, and had to do download the version used in this video that is 5.1, then did that Bypass .bat file, and again followed the steps yiu shown! Thx for this video, though I really needed English Subs, but I just followed your steps, and also my phone got bricked while changing from Custom Rom to Stock Rom, so I selected Download instead of Firmware upgrade
Hey bro plz contact and tell me process. My phone also hardbricked
bro can't find that version 5.1 can u give me the link ?
Thanks from Mexico, it was bricked when trying to downgrade, you saved my life!
Cómo de categoría amigo? Necesito ayuda
saya ucapkan terima kasih banyak atas tutorialnya yang mudah di pahami dan sukses
semoga selalu diberi kesehatan dan lancar rejeki
Bro
God bless you, I fixed my Lancelot that was brick with this. 🤲
Thanks from Ukraine
Thank you my guy, I fucking love you, I have successfully got out of the bootloop, you saved me from buyin a new phone, where I can't buy cause I have no money.
I'm facing the problem trying to unbrick Redmi note 9 (merlin). In SP flash tool appears error: Status_ext_ram_exception. Could you pleasehelp me to unbrick my phone?
Watch the video until the end and follow all my steps then you will not get any error. Make sure use the correct rom firmware by using the fastboot rom file not the recovery rom file.
damn man, thankyou so much my redmi friend almost died. yousave me. but now a have trauma to root any phone again haha
saya sedang memperbaiki hp redmi note 9, awal nya cuma bootloop, saya coba liat tutor lain malah jadi matot hp nya, trus saya liat tutor disini alhamdulillah hp saya hidup lagi seperti normal lagi
Muchas Gracias, he seguido tus pasos y he conseguido desbloquear mi redmi note 9 que estaba muerto. Gracias
Holaaaa, tenías el bootloader desbloqueado? ;( El mío lo está
@@anso1872 no, no lo tenía
Sólo que conseguí el software de otro vídeo y fue con el que me funcionó, siguiendo estos pasos
O seu entrava em modo fastboot?
@@cadusousa7032 no, tampoco entraba en fastboot. Botón de pow + botón vol-, así me reconocida el ordenador el teléfono
Thanks. It works to me.
Thank You! You're the king! You saved me from buying a new phone!
Gracias Hermano, me ayudaste muchisimo, no podia solucionar esa falla, pero gracias a tu tutorial lo hice y pues saludos desde mexico, y de nueva cuenta gracias.
Hermano como entendiste el video si está en indones
Ola amigo igual necesito ayuda
@@joingameplay7405 ya lo hice me funciono
@@joingameplay7405 solo copia tal cual hace el vídeo no es necesario saber indonesio
alhamdulilah bang.terimakasih banyak hp saya bisa hidup kembali.
Спасибо, брат мой, у меня получилось
you are the best
thank you border you are a Genus , big salutation from Morocco
سلام خويا عفاك بغيت نسولك ليحفضك جوبني
دبا كنت شارجيت روم اول روم ريدمي 9 اودرت لها تحديث زعما بدلت سميات اودكشي ،،ولكن دبا مبقاش بغي اعل تليفون نهائيا غير كيشغل زعما كيطلع لوغو ديل ريدمي أو مسعود أطفأ اويعال عاود ليحفضك الا كنتي عارف الحل أو هاد طريقة لفي هاد الفديو خداما ? ره تليفون ولو مكيبغيش ادخل لحت مود
thank you very much, I already gave up, but your method helped
thank you so much, wish you all the best❤
Danggggg!!! thanks
THANKS BROOOO
You are a legend...!!!. I successfully unbricked my RN9. Thank you so much..!
saya ucapkan terima kasih banyak atas tutorialnya yang mudah di pahami
Thanks bang semoga sehat selalu
Tnx bro , you saved my lots of time & money .. 😉
im literally shaking in fear, but your tutorial worked
J'espère de tout mon cœur reparer mon téléphone ce soir grâce à vous. Je vous tiendrai au courant. 🙏😭❤️
thanks man, everything was like in the video I just had to download the DA_6765 file myself and had a little trouble with the install class filter thing because unlike your phone mine was looping.
pls help me i can't install mediatek usb port because my phone keep rebooting
@@mashiko9935 press and hold power and volume up and when it pops up on the computer click it really fast.
Volume down* the combination you use while going to fastboot and when the screen is black and you hear windows notification click the mediatek thing really fast.
Broo can u help me? How did yiu download the DA file??? I cant proceed
Hey Bro. How did you download the file? And I'm having a bit of issue with the bypass step. My phone restarts as yours did. Did you have the same problem? If yes, how did you overcome it?
Semangat bang bermanfaat banget kayak gini bang
Kalau ada bang cari kan python yang 32 bit
Gracias por el aporte y el material que incluyes, me ayudó a revivir mi celular, unicamente no funciona mis SIM Card pero veré como solucionar este problema (¿alguien tendrá videos o alguna solución para restaurar el funcionamiento de las SIMs? por favor)
I also seem to have the same problems,with my simcards network showing available but cant send messages or make calls or receive call also. Did you get a solution?
so many thanks really you saved me
Saludos gracias pude recuperar mi celular un redmi 9 comprobado en pleno 2022 aún funciona gracias
amigo que tenia tu telefono el mio despues de actualizarlo a miui 13 se apaga y prende no agarra a modo fastboot ni recovery
@@WilliansR-jo4ty eso mismo
@@capitanstylo yo intento hacer este proceso pero cuando piso volumen abajo y power se reiniciar el tlf mas rapido vibra y la pc reconoce por pocos segundos y en el mi flash me sale un error que dice seleccione un archivo de autenticación válido o solicite ayuda no te paso lo mismo?
@@WilliansR-jo4ty en esos pocos segundos tienes que aprovechar eso me pasó igual
@@capitanstylo logre avanzar un poco pero ahora entra a fastboot y recovery pero no tiene botloader abierto
you are the best thank you very and very much
SHOWWW! 100%
eyvallah broo sayende telefon oldu
Thankyou banyak banyak bang #myhero
thank you
you save my day
2023 y sigue funcionando. Tuve algunos problemas al momento de conectar el dispositivo y este no era detectado correctamente al usar el programa bypass, me marcaba false en vez de true, estuve repitiendo los pasos en ese punto hasta que el dispositivo me marcaba true. Luego de eso seguí con el tutorial, muchas gracias.
en que cel?
disulpa
@@jeison812 Redmi 9 lancelot. Ese era el móvil que estaba arreglando con el tutorial y funciono. Aunque más que un buen celular sirve para experimentar bastante. Desearía poder eliminar miui por completo.
@@Eiden_Yor a mí me pasó con el redmi9 por querer bajar de versión, solo que el técnico lo arreglo. Yo ya andaba viendo tutoriales por si no puede
@@jeison812 Yo utilice este tutorial para arreglar mi cel igual, redmi 9. En una parte del tutorial me daba errores porque mi computadora no detectaba mi cel, pero al final funciono.
@@Eiden_Yor disculpa, no te dio algun error al cargar el archivo scatter?, es que a mi de da error y no se si es porque descargué la ultima versión de MIUI o qué sucede :c
You are great 😍😍
I get stuck at the bypass step because it doesn't show me "Waiting for device". It says to press any key instead... How may I rectify this?
Same
thanks god bless
thank you very mutch
Saludos desde Mexico!!! 🙏🙏🙏 🕉
Update: Lepas dh berjaya bukak hp ni try lah cuba nak update atau install app dari playstore tapi asyik pending je.. Dh berjam jam tunggu.. Masa yang di paparkan dekat hp pun problem, dia jadi cepat 1 lebih. Boleh x bagi tau camane nk fix google play pending problem tu? Btw nak update google play punya system pun x lepas dia stuck dekat unknown je
Cuba clear data play store tu. Kalau lain2 problem masih tak settle, pegi recovery mode pastu wipe all data(reset) semula. Pastu setup handphone betul2. Lagi satu pastikan internet connection elok dan stabil lah, kalau tak mmg masalah je memanjang.
@@mohdkhusyairie7121 still sama
@@mohdkhusyairie7121 X pe bro, dh selesai dh.. Kene downgrade ke android 10 balik baru dia fix
Muchas gracias , funciona
Man, I love you. You saved my smartphone, you are the best, remember that!
abrazos amigo ....gracias gracias
Thanks man
a mi me pasas que conecto el cable y se prende pero no me carga la barritas y no empieza el processo me podrian ayudar asi lo soluciono por favor
te pasa que se conecta y desconecta el telefono?
@@urielr7544 hola genio al final borre , todo por que no lo pude lograr lo que me pasaba que el telefono no cargaba y el programa no se quedaba cargado pero el celu no actuaba y no subia las barritas
you are the best thank you
Thanks a lot dude.
Bang saya tadi dh buat semua step sampai nk kene bukak sp flash tool.. Saya pergi lah cabut usb cabel saya tu sebab nak transter file lancelot tu.. Lepastu bila saya pasang balik dia kata usb not recognized... Itu memang normal ke? Sebab bila saya nak firmware upgrade bar dia yang bawah tu x bergerak pun.
Tak normal tu. Kalau dah usb not recognize tu kamu terpaksa kena buka soket bateri. Kalau tak pun mungkin masalah port usb d pc. Cuba guna port usb lain, tapi kena repeat filter driver semula dan bypass klu guna port usb lain.
@@mohdkhusyairie7121 macam mana nak buat macam tu?
@@DarahdiRaja guna port usb lain di pc, ulang proses filter driver mediatek usb port di libusb boleh rujuk part dlm video tu. Kalau taknak pening2 buka cover belakang handphone lepaskan soket connector bateri je terus.
@@mohdkhusyairie7121 usb port semua ok je.. Mungkin masalah phone.. Nak bukak soket battery tu bahagian yang mana?
@@DarahdiRaja bahagian tengah tu soket kecik antara dua soket lain dkat motherboard tu, kalau buka cover nnti nampak tu boleh tau sbb bersambung dgn bateri.
helped me bro, thank you. i have one question last time i did install and worked, should i update to miui 13 or not ? because last time i did install it nad broke my phone again .
thanks :)
Thank you
tutorial gooooooooood aunque me apoye de otros tutoriales en idiomas muy extraños, el bypass no funciona, salten ese paso y usen un auto by pass que se llama ACT UNLOCK TOOL V2.0 el que viene en el video me decia que no estaba el python regitrado o algo asi, y busquen el mi flash pro 4.3.1108.24 que es uno que esta en un idioma CHINO, asi no tendran que iniciar sesión, luego ps en el sp flash siguen los pasos del video y ya estaria :b
Holaaa hay que tener el bootloader desbloqueado??
@@anso1872 yo si lo tenia desbloqueado
@@renzortch2251 cual es el procedimiento usando el act unlock tools?
ya fue hace tiempo que resolvi ese problema, pero ese video te puede ayudar ruclips.net/video/rUnVhn6Cg2A/видео.html&t
@@varelamania
I keep getting an error in cmd it says:
ModuleNotFoundError: No Module Named 'src.exploit'
When i excute the bypass file as an administrator it says python can't execute the file or can't find the file main.py when it clearly exists in the directory...
Brother why didn't you put anything in auth?Download only or firmware update, what is the difference and what version do you recommend for the redmi 9?
Great video and thanks!!!
Hello. I have Redmi 9 The phone constantly reboots into either the Redmi logo or Fastboot. I’ve been struggling for several days now to flash the phone. I couldn’t flash it using the Spflash tool. It says boot is locked. Using the Miflash tool in fastboot mode it immediately gives “Error, Today, using the Miflash tool program in the Connect with Miassistant mode, I was able to start the firmware. The process lasted about 20 minutes. Unfortunately, at the very end it gave the following error: “Timeout error” Can anyone please tell me what could be the cause of such an error? I’d like to give some advice. Is it possible to flash the phone in Connect with miassistan mode with the Sp flash tool?
If you wanted, then you could convince us by talking a little in the video! Because without talking it becomes impossible to understand the video !
The "Blow Succes" in the bottom left is gone.
hi, i can't get Media tek USB port shown at 1:58, as the PC says USB device not recognized when i plugged the USB cable to the phone while pressing volume down. what should i do next? thanks
You need to open the phone back door panel cover, unplug and replug the battery socket connector on the motherboard to solve the 'usb not recognized' problem. Or you just can flash directly while the battery socket connector in unplugged condition.
@@mohdkhusyairie7121 oh no, im having a hard to remove the back panel..can u recommend any video that shows removing the cover in the simplest way? Thanks
@@keeweikewy6653 what is your phone model? Redmi 9 or redmi note 9?
i managed to remove the back cover and unplugged and plugged again the battery on the mother board. so i shall try again the steps earlier?
@@mohdkhusyairie7121 redmi 9c
please help me I have an error STATUS EXT RAM EXCEPTION
Bg ane punya keluhan, kenapa ya bg setiap mau ngelakuin download katanya eror mulu,padahal udah instal driver ama filter driver cuman driver nya hilang timbul gitu
gracias método aun activo.
My redmi 9 keep always turning on and off soi didn't get the mediatek driver in libusb when connect in in pc, what to do please?
When in libusb while the phone keep bootlooping, connect the usb then hold power+volume down together until it turn off.
Everything was going well, but at the time of the libusb program, it does not work correctly (I press volume down, but the PC does not recognize it) is there any solution?
@@Elc4ctusxd if you get the “usb not recognized”, you need to open the back cover of your phone, disconnect and reconnect the battery socket.
@@mohdkhusyairie7121 Forget it bro, I already solved it with your video, thank you very much!
Al abrir CMD e instalar el comando me sale "pip" no es reconocido!
does it have to be with miui 12.0.4?
because I tried with recents and it doesn't let me continue after the minute 4:00
You can try the 12.0.4 ver
@@mohdkhusyairie7121 i get ERROR: STATUS_EXT_RAM_EXCEPTION (0xC0050005)
bro una pregunta porque se me reinicia la lapto cuando hago la parte del bypass conecto el cable y el volumen bajo y hace el proceso rapido y se reinicia mi lapto ayuda pls
Anda pakai miflashpro versi berapa?
Versi latest
I lost IMEI when unbricking.,..
First of all, thank you, the installation was successful, but when turning on the phone, the redmi series comes and goes, I installed global rom, can you help?
Python was not found; run without arguments to install from the Microsoft Store
Have you managed to fix it?
Thanks for your work. After flashing still brikcked, can i try something else?
Why still bricked?
@@mohdkhusyairie7121 Fixed it, thank for your help. I messed up some things, your guide is 100% operative.
Que hago si en el libus no me detecta el celu?
my redmi note 9 cant enter fastboot or recovery mode my screen is blank i try everything on the net. when i plug usb cable windows 11 laptop says "usb device not recognized" pls help
If you get the 'usb device not recognized', then you need to open the back cover of your phone, disconnect and reconnect the battery socket connector from the motherboard. That's the only way to fix it. Then after done that, follow the video for unbricking process.
@@mohdkhusyairie7121 thx i did