Round Bale Loader
HTML-код
- Опубликовано: 10 сен 2024
- Demonstration of JKD Engineering's Round Bale Loader.
A new and highly efficient piece of equipment to transfer all bale types from the field to storage in minimal time.
For further information please contact James on 078 1809 4633
(c)JKD Engineering 2011
Both the unit and the TeleTrac are handmade Will - James is quite a clever and innovative man when it comes to things like that. He built the Teletrac from scratch for lighter jobs around the farm, so it has multiple uses in that respect. On his behalf - not everything is perfect - he's just looking at solutions to make life easier for this process. Since I last spoke to him I believe the concept designs have been sold on for production. If I hear of anything more I will post news. Thank You all for the comments!
If you make a similar frame arch on the front, like it has at the back, you can slide them in from the front and forget about the slow and cumbersome loading arm.
Quite smart , though for me the tractor/telehandler is the most interesting. Any more videos showing that?
The 2850 bale loader is much less efficient than the JKD Engineering's Round Bale Loader demonstrated in this video; in that, the 2850 bale loader would have to pass by each and every bale in a field setting and then have its direction reversed in order to gather them up. Whereas with the JKD Engineering's Round Bale Loader, it expeditiously gathers up each and every bale, one after the other, in a forward motion and then on to the next bale to be gathered up.
Very good idea
The TeleTrac was hand made? Give some people a wielder and prepare to be amazed
good idea, but why not just have a offsetting drawbar like heaths bale chaser ??
what on earth is a tele trac?
This man must be a dreamer.unbelivable how he can waist time and energy by continuosly lifting up/down chassis and pulling by ground.i want just know how many rounds will be before new oil change and newvalves and new chassis.sha
j'adore regarder ces védeo,mais je ne sait pas c'est quoi,à chaque védeo le volume coupe à tout les 2 secondes.merci .**
The concept is good, A guard to stop the bale rolling off the other side when tipping onto bars/trailer would be an idea, You need a pressure regulator so you can have both rear actors lowering/raising at the same time and on one valve, it looks like there on two, And why not add a pusher plate with a telescopic ram for compactness, You could be pushing the bale back as you move to the next one and then you would only have to lower the back end when unloading.
can u make another video of the bale loader looks like a good machine . and how much ?
I like the idea, but it wouldn't save me any time really.
Mine can only bring in one.
Not fast, but not bad
!!!