Code is not running in Proteus simulation. Gives error message "Controller received command while busy". Also, an include file "stdint.h" which is meant to be in the same folder as the main Ardu tester.h is missing from the posted zip file. Is it an omission or an error in the include call?
The ArduTester_1_13.ino is based on 16*2 LCD or lCD 128*64. pls rectify. also U programmed with version 0.7 but u giving here 1.13. why. This is not mean for 16*2 lcd.
Hello Kiyanis, i want to make your components tester but can you tell me if the only code to enter in the arduino is Ardu tester1.13 thank's for your response cordially Richard
Kiyani's Lab.............2 days ago you have made a over-current protection circuit................................can this circuit auto cut if output is shor-circuit ..........I mean somehow Neutral and Phase line is connected......plz. reply....
there r lots of videos on youtube on shot circuit protection ....... better to be watch great scott , electroboom, or kesyan tv channel for better and best understanding and knowledge
You have error in diagram. Connection from D13 and D12 need to go A2, and D8 and D9 need to go to A0. I lost two days to figure out what the problem is. You can find right diagram on other videos on youtube. Thanks anyway.
Constantly just restarts with testing...... selection: transistor. Testing..... I've rebuilt the circuit 8 times with new wiring etc every time to ensure no broken wires etc. Flashed with 3 different versions of Arduino IDE. Same thing.
this message error appear : ArduTester:81:4: error: #error Invalid Parameters: Use LCD_PRINT or DEBUG_PRINT #error Invalid Parameters: Use LCD_PRINT or DEBUG_PRINT how solve this error ?
when you put a videos on your channel you are responsible for answer the question about it too many people asked you about the error "#error Invalid Parameters: Use LCD_PRINT or DEBUG_PRINT " but you didn't answer it. it seems that you just answer to " thanks comments"......
@@KiyanisLab thanks for the code. The only problem is that the LCD won't show anything. I check all the wires are correct. Is there an additional library I need to install?
Can we measure the value of ceramic disc cap 104 with this tester
Why do you need the 1x3 terminal block? You don't seem to connect anything to the block terminals
Hello, I have a few questions. Please help me:
How did you calculate the resistors for the circuit, and why did we not use i2c?
I don't have 680ohm resistance. How much Ohm's registance should I use instead of 680ohm Registance?
Is there any maximum value for resistors or capacitors that can be tested using this circuit...
What is the measurable value of the maximal component
Code is not running in Proteus simulation. Gives error message "Controller received command while busy". Also, an include file "stdint.h" which is meant to be in the same folder as the main Ardu tester.h is missing from the posted zip file. Is it an omission or an error in the include call?
Code doesn't match with 16x2 LCD even pins not defined?
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
@@KiyanisLab you are false
how to calibrate ArduTester v1.13
It's giving this error: ArduTester_1_13.ino:158:22: error: macro "lcd_refresh" passed 1 arguments, but takes just 0
Can we check inductor too with this?
yes we can
is there any made with display by i2c
It shows error after upload, .h error appear, pls help to upload code in uno, and display shows only box in first row, I'm basic in Arduino
Sir please tell
Why we use 680 and 470k resistor combination
"Wow", this is REALLY kool 😉 Thank GOD, and thank you for your support and time 😎
hey i tried to use it with i2c lcd interface but its show nothing just a block on the lcd, and the serial monitor is blank..
any idea? thanks
Where did you found the code.
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
use simple 16x2 lcd
@@KiyanisLab thanks
#error Invalid Parameters: Use LCD_PRINT or DEBUG_PRINT
please help
Sir, this circuit can me use a arduino nano??
The ArduTester_1_13.ino is based on 16*2 LCD or lCD 128*64. pls rectify. also U programmed with version 0.7 but u giving here 1.13. why. This is not mean for 16*2 lcd.
how come this tool can find out the component it is measuring, for example resistors and other components?
ardino code ?
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
@Kiyani' ki lab, can i get the code?
alex toskov your code does not work.
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
Hello Kiyanis, i want to make your components tester but can you tell me if the only code to enter in the arduino is Ardu tester1.13 thank's for your response cordially Richard
Kiyani's Lab.............2 days ago you have made a over-current protection circuit................................can this circuit auto cut if output is shor-circuit ..........I mean somehow Neutral and Phase line is connected......plz. reply....
there r lots of videos on youtube on shot circuit protection ....... better to be watch great scott , electroboom, or kesyan tv channel for better and best understanding and knowledge
You have error in diagram. Connection from D13 and D12 need to go A2, and D8 and D9 need to go to A0. I lost two days to figure out what the problem is. You can find right diagram on other videos on youtube. Thanks anyway.
Please ,the Nano version and code
No change in code required for nano version
github.com/kr4fty/Ardutester i'm not sure if it is this one tho
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
Can i check smd capacitor.?? Plz answer
yes bro
Calibration procedure? thanks in advanced.
were is the code 😜
github.com/kr4fty/Ardutester i'm not sure if it is this one tho
@@alextoskov3765
Cannot run on i2c
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
Very good, congratulations. Could you do this with a Lcd keyboard shield?
Block Diagram 7:18
How to calibrate for accuracy.
Can you give the libraries?
How do you upload code to ARDUINO?
Aap ne iska code to diya hi nhi,where is arduino code of this project
πολυ ωραιο αλλα μου βγαζει σφαλμα στον κωδικα # error Invalid Parameters : use LCD PRINT or DEBU
ardu tester search karo mil jayega.... isne to copy kia hai
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
this project designed by you?
Inductor valu?? Showd??
Please use I2C interface between LCD and Arduino.
Constantly just restarts with testing...... selection: transistor. Testing..... I've rebuilt the circuit 8 times with new wiring etc every time to ensure no broken wires etc. Flashed with 3 different versions of Arduino IDE. Same thing.
arduino sd se damage resistor ko kaise check
What is the name of the ino file?
this message error appear :
ArduTester:81:4: error: #error Invalid Parameters: Use LCD_PRINT or DEBUG_PRINT
#error Invalid Parameters: Use LCD_PRINT or DEBUG_PRINT
how solve this error ?
Where is the code for this project. I can't find it.
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
Search for Mr tech inventor he made simplest component tester
Hello, could you pass us the code please? Thank you.
github.com/kr4fty/Ardutester i'm not sure if it is this one tho
@@alextoskov3765 Muchas gracias. :D
@@alextoskov3765 Yes, it is. Thanks a ton.
@@due204 bro please pass the code
@@balajinali4993 Hello, the code is in the description.
Dear friend, what's the uses of others code in rar file
Can I test smd components with this
yes
@@KiyanisLab tnx
Can this system test SMD components?
yes bro it can
The code and why the variable resistor.
Variable resistor is use for adjust LCD brightness but where is the programming code?
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
Coding upload procedure not provided
Dear sir i have tried 100 times but the scetch in getting uploaded...please make a viseo as how to upooad th3 scetch
The video explanation is different from the chart, and there are many mistakes. I tried it myself many times
Please, I will like all your youtube videos
I need code of this program
when you put a videos on your channel you are responsible for answer the question about it too many people asked you about the error "#error Invalid Parameters: Use LCD_PRINT or DEBUG_PRINT
" but you didn't answer it.
it seems that you just answer to " thanks comments"......
sorry for that bro i receives thousands of comments which makes it impossible to answer every one
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
What software use for this project
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
Please make a video on explaining Types of MOSFETs and their working principles.
ا
Good work
Code upload nahi ho pa raha hai error code
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
Super..👍👍👍
Code?..🤔🤔
github.com/kr4fty/Ardutester i'm not sure if it is this one tho
@@alextoskov3765 thank you
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
I am not good at code I put in the code but has lots of errs lots of not declared in scope
πολυ ωραιο αλλα μου βγαζει σφαλμα στον κωδικα # error Invalid Parameters : use LCD PRINT or DEBUG PRINT
Can you make simulation video on it
ok bro
the code is not work correct can you help me??
let me check bro
Arduino code in error brother do you have a correct code brother 🤔
maaf saya pemula (newbie)
untuk code yang mana ... Itu ada 56 file
saya bingung 🤔🤔😢
Terimakasih
ESR is not showing
Can you make code for i2c display
ok bro soon
plz give us the code to make this project
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
Ardutester v0.7f code please sir
How to measure resistor
just place it between two test points
what is the potentiometer used for?
for LCD brightness
@@KiyanisLab can we replace it with resitor if we know the value of brightness we want?
@@Randorandom232 yes
Sir make videos on cvt stabilizer
Arduino software?
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
Sir pilce simple 2sc5200 Tranister amplifire 100watt hommed.
Where is the link to the software?
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
thats wrong info. you are using v0.7 but u giving v1,13 and program looping transistor selection
Code.. Plese.
Code?
github.com/kr4fty/Ardutester i'm not sure if it is this one tho
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
Ardino code kha h ?? Bina code ke iska Kya kre?
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
Cool project bro
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
Good video
Hlw sir
Can you provide code for this project ?
Check description
@@KiyanisLab link is not working !!!
Code error bata raha hai
wrong code its not working.upload the one you used in the video.
bhai component testeer to kam kr rha hai lekin tollerence bahut jade show kr rha hai
do u have the code
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
@@KiyanisLab yes but thios code is running autometicaly random charactcher and random numbers as t1 t2 t3 t4 t4 capacitors
Where is aurdino program
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
Okay 👌
Where is the code??
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
@@KiyanisLab thanks for the code. The only problem is that the LCD won't show anything. I check all the wires are correct. Is there an additional library I need to install?
@@mikes3801 adjust trim pot its for lcd contrast
Code dijiye sir please
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
Sir can u provide us ardunio coding plz
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
sir where is the code??
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
Bhai code dedo iska please
there is no code???
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
cored pls
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
@@KiyanisLab thank you
please code sir
brilliant !
Code????
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
Code link ? 🤔
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
Please, when you going to give us the code
github.com/kr4fty/Ardutester i'm not sure if it is this one tho
@@alextoskov3765
πολυ ωραιο αλλα μου βγαζει σφαλμα στον κωδικα # error Invalid Parameters : use LCD PRINT or DEBU
main file is ArduTester_1_13.ino
drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing
Howe to make wireless mic🎤