What is Control Valves? | Parts of Control Valve | Actuator | Electrical & Automation

A control valve is a valve used to control fluid flow by varying the size of the flow passage as directed by a signal from a controller.[1] This enables the direct control of flow rate and the consequential control of process quantities such as pressure, temperature, and liquid level.
In automatic control terminology, a control valve is termed a "final control element".
You can contact us and follow at following social media platforms
.Facebook Page
/ yoitubeelectricalandau...
Instagram
/ automationandelectrical
Linkedin
/ admin
Twitter page
/ gupta29amar
Facebook Group
/ 250198395516620
RUclips Channel
/ channel
You can follow us at every social media platform like
#facebook_page
#facebook_group
#Instagram
#twitter
#linkdin_page.
We also upload video on request. For any enquiry mail us at
[e-mail]
regards
team electrical and automation.
Please do not forget to share and subscribe to the channel and if you really like the video then put like on the video every like of yours expand us to the world.
The opening or closing of automatic control valves is usually done by electrical, hydraulic or pneumatic actuators. Normally with a modulating valve, which can be set to any position between fully open and fully closed, valve positioners are used to ensure the valve attains the desired degree of opening.
Air-actuated valves are commonly used because of their simplicity, as they only require a compressed air supply, whereas electrically-operated valves require additional cabling and switch gear, and hydraulically-actuated valves required high pressure supply and return lines for the hydraulic fluid.
The pneumatic control signals are traditionally based on a pressure range of 3-15psi (0.2-1.0 bar), or more commonly now, an electrical signal of 4-20mA for industry, or 0-10V for HVAC systems. Electrical control now often includes a "Smart" communication signal superimposed on the 4-20mA control current, such that the health and verification of the valve position can be signalled back to the controller. The HART, Fieldbus Foundation, and Profibus are the most common protocols.
An automatic control valve consists of three main parts in which each part exist in several types and designs:
Valve actuator - which moves the valve's modulating element, such as ball or butterfly.
Valve positioner - Which ensures the valve has reached the desired degree of opening. This overcomes the problems of friction and wear.
Valve body - in which the modulating element, a plug, globe, ball or butterfly, is contained.

[@ukemeezekiel9637]

Great skill from a great engineer. Pls Sir interpret into english so I can benefit from your great lectures. Many thanks.

[@ElectricalAndautomation_guru]

Ok. Thanks

[@Mayank14755]

nice video

[@ElectricalAndautomation_guru]

Thanks for the visit

[@mixedfeelings9782]

Very nice.

[@ElectricalAndautomation_guru]

🙂

[@arabindabehura4181]

Sir aur video Control valve ke uper banaye plz.

[@ElectricalAndautomation_guru]

Ok.sure. please share with others also

[@sunandposhiya2220]

Positioner ke zero and span calibration ke upr video banaye please

[@ElectricalAndautomation_guru]

Ok sure.

[@shivamraj4990]

whole thing is not the actuator, actuator is the diaphgram and spring part only, Lower part is the bonnet and yoke combined

[@ElectricalAndautomation_guru]

Ok, thanks

[@mangeshsingh7793]

Bhai katne tipe ka control hota hai

[@ElectricalAndautomation_guru]

Ok, I will. make a video on that ll

[@hinalshah8859]

Flow control aur pressure control karta hai

[@santoshvishvakarma1034]

Sir Mai valve technician hu please job ho to bataye

[@ElectricalAndautomation_guru]

Ok

[@Invisible_Tri]

Sir ak video ICSS aur ESD System pe bna dijiye

[@ElectricalAndautomation_guru]

ok

[@SurajSingh-wk1tk]

Control valve h kya ye to btao sir iska kaam kya h

[@ElectricalAndautomation_guru]

Thanks, and welcome, please subscribe and share

[@hinalshah8859]

Ha control valve hai ye