Support/JOIN : ruclips.net/channel/UCaQRmy4Beww-riYiV44qjhgjoin My Short Guide about EPOXY RESIN: www.amazon.com/Short-Guide-about-EPOXY-RESIN-ebook/dp/B07ZWKS2PV
Good morning! This coke can looks amazing! The way the "fluff" creates that perfect effect is mind blowing...so cool!🤯 Another incredible project, keep them coming. Have a great weekend...Big hugs from Texas!😍🤩
Awesome resin creation you use this transparent can art as a science model cause there science experiment using a certain basic chemicals to eat the aluminium leaving the plastic and contents of the can however its very fragile to touch so the resin art makes it easier to show the example up close. Lots of love and blessings.
Very nice ! It would have been interesting, if you would have added a burst and torn out part of the "Coke"-can to the bottom part of your transparent cylinder. And a LED-light inside the epoxy also near the bottom of it, so that your ice cubes would be lit from underneath.
I see what you did, the cubes are the sugar content in every can of coke, nice. Maybe the can should have been cut in half, then while rotating one could see what is inside. Anyhow looks cool 👍😊
I love your art. But one thing about this one, Why are there ice cubes inside a can of Coca Cola? It would look great if it was a glass of soda. Long time fan and subscriber. ❤
I think a lot of us are thinking the same thing. Great job on the project, but I'm a little confused about the icecubes in an unopenned can. If it had been like frosty ice inside, that would make more sense that it was on the verge of freezing. Once again, overall, it's a great looking project!!
Oooh ! Could crack a deal with the company... looked tasty.. On another level, one project that could be a great challenge for you but I'm sure you'd be good at it... a liquid hourglass.. or if you want a liquid motion bubbler.. used to love those as a kid !
@@jedrek29t thank you. You should try something for Halloween like the brain or some body parts in jars or something. Cause the soda looks so cool with ice in it.
There's a slight problem with that. It's a registered trademark. Push comes to shove, they can send a cease & desist to him, and ask YT for a strike against him, as well as demonitization of the video.
You did a lot of extra work.. The can itself already has a plastic lining. You just have to dissolve the aluminum and you will be left with the plastic shell and lid intact :)
I'm a long-time fan and supporter, but you lost me with the ice cubes. Ice cubes in a sealed can of Coke? And the "liquid" looked dark blue instead of brown. I love the idea, and could see where you could have done so much with it, but I don't think this one was as good as so many of your other ideas.
Agry,a good idea to make a can of coke,but the ice cubes looked just weird,maybe you can try to make it with some small bubbles instead and add both the bottom and the top of the can,not just the top.
Support/JOIN : ruclips.net/channel/UCaQRmy4Beww-riYiV44qjhgjoin
My Short Guide about EPOXY RESIN: www.amazon.com/Short-Guide-about-EPOXY-RESIN-ebook/dp/B07ZWKS2PV
❤❤❤
Sir give me gift me 😌💝💖
All that’s missing is the sound effects!!! You know, “psst, gulp, ahhh!”
Lol, awesome job!!!
❤️❤️❤️👍🏻👍🏻👍🏻
It would be better
Very cool. Maybe try to make one where the liquid moves inside.
Cool idea
Yes that would be really cool ✌🏼
I agree, a clear coke can! Just hope nobody pulls the tab...
Throughly enjoyed this as usual, extra special when you use the lathe ❤
This is the first thing of yours that I have seen, and right away I'm subscribed. Bloody brilliant.
I personally love the addition of the ice cubes; they add dimension and detail to what would otherwise be a rather flat piece visually
Exactly
Haa the relaxing background music and art ❤️🔥✨💫 awesome dude!❤
Thank you so much 😀
Good morning! This coke can looks amazing! The way the "fluff" creates that perfect effect is mind blowing...so cool!🤯 Another incredible project, keep them coming. Have a great weekend...Big hugs from Texas!😍🤩
Thanks Kelly
Every time I watch your videos. I dont skip ads. Because it helps to your channel and buy another materials. ❤
Thank you so much for understanding this. Thank you very much
I like how you made this can see through! The ice cubes are a great touchVery creative!
Thank you so much!
That’s so cool!👍👍👍👍 Cotton for ice cubes. Pretty imaginative.
Thank you 🤗
@@jedrek29t you’re welcome.
That was a nifty little soft drink like project, pretty cool. 👍👍👍😎
Thanks 👍
I wish I had you're wolf necklace it's my animal spirit
Awesome resin creation you use this transparent can art as a science model cause there science experiment using a certain basic chemicals to eat the aluminium leaving the plastic and contents of the can however its very fragile to touch so the resin art makes it easier to show the example up close. Lots of love and blessings.
That's right. Thank you
I love the project! The ice cubes throw me off though 🤔
Now that's thinking outside the can!
Exactly
Wow that’s awesome well done. And keep up the great work your doing as well your art 🖼️ videos are the best and see you next Friday😁👍.
Thank you so much 😀
Very nice ! It would have been interesting, if you would have added a burst and torn out part of the "Coke"-can to the bottom part of your transparent cylinder. And a LED-light inside the epoxy also near the bottom of it, so that your ice cubes would be lit from underneath.
Interesting idea
Brilliance just Brilliance
Un brindis a vuestra salud estimado señor.🛠👍
That's great job my friend you're so genius man 🏅🏅🏅🏅🏅🏅🏆🏆🏆🏆🏆🏆🎖🎖🎖🎖🎖
Thank you very much Aziz
I see what you did, the cubes are the sugar content in every can of coke, nice. Maybe the can should have been cut in half, then while rotating one could see what is inside. Anyhow looks cool 👍😊
Cutting it in half would be interesting
Came out great. 😎👍
could you make a baby chick and a mother chicken in a resin egg? it would be so cute :). I love your art by the way, it is so creative
It wouldn't be easy. Thank you
That was cool and very clever.
Thanks 😉
Szép munka! 👍🏻🤠
😉
Again Friday. Again, my especially favorite relaxing video =) Cool!
Glad you enjoy it!
I want that.
🤗🤗
It looks really cool.
I'm glad you didn't embed it in some other resin. That looks cool inside.
Cant say this project hit its mark
Why?
Buen día excelente lo voy hacer, otra cosa como se llama el aparato para quitar las burbujas donde lo puedo adquirir?
Bubble removal machine: amzn.to/3BxnNTe
I love your art. But one thing about this one, Why are there ice cubes inside a can of Coca Cola? It would look great if it was a glass of soda. Long time fan and subscriber. ❤
I was thinking the same thing.
Imagination gone too far 😜
Well that's just it! It's a mystery, like the gimmicky gadgets where they put dice inside a cage, or a metal bolt inside a wooden block, etc! :)
I think a lot of us are thinking the same thing. Great job on the project, but I'm a little confused about the icecubes in an unopenned can. If it had been like frosty ice inside, that would make more sense that it was on the verge of freezing. Once again, overall, it's a great looking project!!
Goodness me, its creative art not reality 🤷♀️
Thank you. P.
Welcome!
Oooh ! Could crack a deal with the company... looked tasty..
On another level, one project that could be a great challenge for you but I'm sure you'd be good at it... a liquid hourglass.. or if you want a liquid motion bubbler.. used to love those as a kid !
I've even thought about it before. It's a big challenge
@@jedrek29t Oh I'm sure.. but with the skills you have, your ideas and tricks, I'm pretty sure you could make a beautiful one..
Why would there be ice cubes in a sealed can
My imagination has gone too far 😜
It’s art. You are only limited by your imagination 😊
Love it❤. Thank you x❤
You’re welcome 😊
One of those rare times when bubbles are desired.
Exactly
This is cool. Love it.
Thanks Deb
Awesome! That was so cool
I'm glad you like it Stephanie 😉
@@jedrek29t thank you. You should try something for Halloween like the brain or some body parts in jars or something. Cause the soda looks so cool with ice in it.
Another coke!!!!❤❤ love it!!
I'm glad you like it 😉
I have a question for you. How fast, in real time, does the resin harden when you shine it with an ultraviolet flashlight?
It solidifies in two seconds but takes several minutes to fully cure. Only the UV resin cures
@@jedrek29t wow. Really quickly.
I don't know how hard it would be, but maybe 3D print the Coca-Cola logo in a slightly haze, then surround that in resin and fill it as you did
👍
There's a slight problem with that. It's a registered trademark. Push comes to shove, they can send a cease & desist to him, and ask YT for a strike against him, as well as demonitization of the video.
@@TeamDoc312 True enough, Maybe some generic sodo logo, something more to suggest it's a transparent can of soda
@larrywilliams8010 I do like your idea though. If it was a one-off casting for my own collection, I would most certainly do it!
Legaal ❤❤❤
Richtig cool ❤👍😁
Danke Andreas 😉😉
Transparent Tymbark bottle with only metal cap on top? ;)
It’s a can not a bottle and the point is to be a transparent can filled with ‘coke’ and ‘ice’ so you have it topped with the metal top.
Parece real buen trabajo 👍
can u Build a Resin PS5 Case/Panel? with LED/RGB support @ power from the PS5?
I don't have a pleystation
@@jedrek29t can u get a ps from a friend?
Would have been more realistic without ice cubes
It's true
❤❤❤WOOOOOW
Very nice❤
Thanks 🤗
Nice. 😊
Thanks
How would ice cubes get inside a can of Coke?
Art
You did a lot of extra work.. The can itself already has a plastic lining. You just have to dissolve the aluminum and you will be left with the plastic shell and lid intact :)
👍
Can anybody help me? I've been searching for this video's intro music (bass guitar) for a long time. Can anybody tell me the name of it?
Kevin MacLeod, Airport Lounge
I am a bit confused as to how a sealed Coke can would have ice cubes inside, but it does look cool :)
This is art. Thanks
Seperti nyata, 👍👍👍
Wow👍❤️😀
😊😉
There are bubbles in my resin blocks :(. When I mix hardener with epoxy resin there are bubbles starting to appear.
Genial...
Thanks Jose
Piękne dzieło jedrek29t
Dzięki
I'm a long-time fan and supporter, but you lost me with the ice cubes. Ice cubes in a sealed can of Coke? And the "liquid" looked dark blue instead of brown. I love the idea, and could see where you could have done so much with it, but I don't think this one was as good as so many of your other ideas.
Usually I will add something that does not fit the design something that my imagination prompts me 😜 Thank you for your feedback
Good, I wasn't the only person who thought ice cubes in a sealed soda was weird. It was still fun to watch the creatives process. Thank you!!!
Agry,a good idea to make a can of coke,but the ice cubes looked just weird,maybe you can try to make it with some small bubbles instead and add both the bottom and the top of the can,not just the top.
WoW
❤️
❤❤❤
I would like to point out a can of unopened soda is not going to have ice cub in it
Everyone knows that. It's an art, not a real drink
Kind of a small "can"...
@@dantyler6907 they make mini cans of soda
First 👍
good job
👍♥️
😉👍
Cool Resin Art and Imma1st
HI-TECH ARTWORK ⚡👑💗💖💝😌
..
..
..
..
..
MY FAVOURITE CHANNEL JEDREK29T 😌👑😌
Thanks
I'm aghori baba 💀✡️🔱
×÷×÷×÷×÷×÷×÷×÷×
From India🇮🇳 HIMALAYA 🏔️🏞️
,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.
JERDREK POZDRO RODAKU 😃
Pozdro 😉