Fiat 500 Cat S Damage Assessment How Bad Is It Behind Bumper And Wing Part 1

Hello and welcome
This is part 1
This episode i take apart the fiat 500 front end removing the bonnet and hinges.
The front bumper and slam panel also the drivers wing but how bad is the damage lets find out .
Thanks for watching apricate your support
Please subscribe and share

[@giff1669]

Well done on the Work Experience- too easy to say No I can’t help.
Your friendly manner makes you approachable and the young man will be very grateful I’m sure

[@ResurwreckAutosUK]

Thanks buddy yeah it’s all good 👍👍

[@dcdriving2463]

Agreed mate .Thomas is really looking forward to it.

[@ResurwreckAutosUK]

@@dcdriving2463 you mean Tom 👍

[@dcdriving2463]

@@ResurwreckAutosUK lol we call him Thomas but he prefers Tom lol

[@billhaughton6431]

Nice to see your encouraging young people into physical work. Must of them want to work in IT

[@ResurwreckAutosUK]

Thanks Bill appreciate it buddy 👍👍

[@dcdriving2463]

That's going to be a really nice car and a very quick seller. Really appreciate you letting Thomas doing his work experience with you he's really looking forward to it .but remember to call him Tom lol thanks again bud.

[@waynerountree9284]

Yet another top video enjoyed watching thanks for sharing 👍👍

[@iandyson2176]

always a thumbs up from me well done Mark

[@ResurwreckAutosUK]

Thanks Ian appreciate it buddy 👍👍

[@michaelclarke3684]

Busy day mark, great content, thank you

[@ResurwreckAutosUK]

Thanks Michael appreciate it buddy 👍👍

[@Love500]

Yeah door card off, release that screw in the side just to give the handle a bit more movement. Remove 10mm nut on hinge. Remove the old hinge, then unscrew the bit that’s still attached to the handle with a screwdriver through the hole. New hinge has to fit unfolded because of the screw, once screwed up, again through the hole, pull the handle out a bit and pull the hinge into position into the hole and put the nut back on.

[@flippingcarsrepairs]

You done well on that one no horrible surprises 👍👍👍

[@ResurwreckAutosUK]

Thanks buddy yeah definitely going to do good on this one 👍👍

[@nigelbryant5932]

Nice easy, cheap fix. Just hammer that bracelet back into place. Should only take a few light taps. Nice little car Mark 👍

[@ResurwreckAutosUK]

Thanks buddy appreciate it buddy 👍👍

[@Love500]

I think I have a good inner wing in my garage. I can take some pics of the undulations and send them to you if that’ll help.

[@marcusmaximus451]

Another super little number you’ve got there Mark impressive as always 😃👍☀️ 🚗

[@ResurwreckAutosUK]

Thanks Mark appreciate it buddy 👍👍

[@martinfield1484]

Great work mark my cat n Hyundai i10 looked worse than that a few tweaks here and there and you’ll have that back together in no time
This is where you make your money mark I feel you spent a lot of time with the trying to spray panels yourself when you could be doing jobs like this👍

[@ResurwreckAutosUK]

Thanks Martin yeah definitely should not have been a car s more like a cat n but will definitely be a quick one 👍👍

[@daviddominiak7790]

Great video and what a good looking car it will be after your touches ☺️☺️ keep on doing it as you do and stay safe and strong mark

[@ResurwreckAutosUK]

Thanks David appreciate it buddy 👍👍

[@trevorjarvis3021]

Cracking days work there Mark! Hope the wing, bonnet, bumper were all ok. Could be a right result. 👍

[@ResurwreckAutosUK]

Thanks Trevor appreciate it buddy you will see in the next video about the parts 👍👍

[@Darren-DJL-1]

Nice work Mark, gonna be a nice little car. Im jealous of your lift lol.. one of my jobs last week was 2 wishbones on a fiat 500 and i was rolling about the floor thinking a lift would be handy here lol. Keep it up bud!

[@ResurwreckAutosUK]

Thanks Darren yeah that lift is so handy so much quicker and easier and safer 👍👍

[@jamiemason9548]

Hi Mark nice little car it looks good you have covered a lot of hard work to make it looking good all the best to you and your family 😎👍🇬🇧🇬🇧🔧

[@ResurwreckAutosUK]

Thanks Jamie appreciate it buddy 👍👍

[@Love500]

I’ve had nightmares with those lower chassis extensions. Took me a while to work out you need to have them loose 😃

[@leeroberts5496]

Great video

[@carhomerepair8651]

Hi Mark I'd of done the rad surround and crash bar £50 posted mate bonnet hinges £20

[@razuuddin5642]

really good lift, where did you buy the car lift?

[@johnhaigh9428]

Hi Mark, before you go on, check the condition of the other side (passenger) wishbone rubber it may also need replacement. Nice little car, should sell well. Certainly earned you pay today on all that work! well done.

[@ResurwreckAutosUK]

Thanks John appreciate it buddy I have checked the other side it’s ok 👍👍

[@richardparker9322]

Where did you. Get salvage parts for fiat 500. Can you recommend?

[@ResurwreckAutosUK]

Hi Richard I get from eBay or main dealer 👍👍

[@scoyle1750]

How is that a cat s very little damage works well for yourself

[@ResurwreckAutosUK]

Hi buddy it’s mad I think it’s because this one and most salvage cars don’t get stripped down to see the damage just madness 👍👍

[@Love500]

The bent over chassis rail tip is enough.

[@Michael-m4y]

Hi Mark, stillsons on the crash bar would have straightened it 👍👍

[@grahamcross6771]

Mark, a decent pair of stilsons would have straightened out the leg without the need for an extra pair of hands. Good work so far though.

[@a11csc]

you dropped on your feet there mark

[@ResurwreckAutosUK]

Thanks Chris appreciate it buddy yeah definitely seams a good one should be a great car when finished 👍👍

[@squeakmillward]

that intro is just too long

[@themadcoachman]

That door handle will take like 10 mins, you can get new ones cheap on ebay don't get used not worth it

[@ResurwreckAutosUK]

Thanks buddy appreciate it buddy 👍👍