I use this Bosch/Dremel Go screwdriver. Fast and powerful tool. But: 1. Torque is bad. Hard and not controlled. It turns around in our palm at the end of tightening the screw, therefore dangerous. 2. We can’t use this tool during tightening and removing small screws by pressing the tool to run. The act of pressing may be softer. 3. Drill bits get away after drilling and we are obliged to remove by our hands...
Is it good for rough use ? Does it has enough power i try to find something small with good battery fit anywhere and strong power is there anything outhere ? For professional use
After one year I picked it and the battery was dead so I charged it after spending one hour to look for the charger but then remembered it came with a USB cord only so after charging it, it wasn't responding to power buttons clock or anti clockwise but then after 2 days I figured out that you need to press it against the screw /drill etc. , so far the Mi tiny screwdriver is the best though it could be powerful for a perfect handy dandy solution. For many others the charging adaptor and port plug is obsolete and if you misplace them it's harder to find the exact voltage one.
Scheint mir irgendwie schwer zu bestellen sein, selbst wenn man Mitarbeiter bei Bosch fragt. Ist das ein offizielles Bosch Produkt? Bei Wish krieg man sie. Original oder Fälschung?
In manchen Staaten werden Bosch (blau) Modelle verkauft, welche in Deutschland oder Österreich nur als Bosch (grün) erhältlich sind. Ob dabei in diesen blauen Modellen bessere, sprich langlebigere Teile verbaut werden, entzieht sich meiner Kenntnis.
Im sadly reporting that the electronic clutch (torque limiter) is so high that even the lowest setting will damage any electronics, computer cases and even plastic household appliances. This tool is useful for carpenters and alike only
Two days i search on internet I am suspect to this product have more power than nead.Min is 2.5N/M.Now you give me ansver.It destroy plastic.Thank you for review
Good idea, but bad design. This screwdriver has no electronic or mechanical stop. This means the screw makes 3 to 5 revolutions once you stop. This makes it impossible to make all screws same height etc.
I have one and I love it. Extremely useful.
I use this Bosch/Dremel Go screwdriver. Fast and powerful tool. But:
1. Torque is bad. Hard and not controlled. It turns around in our palm at the end of tightening the screw, therefore dangerous.
2. We can’t use this tool during tightening and removing small screws by pressing the tool to run. The act of pressing may be softer.
3. Drill bits get away after drilling and we are obliged to remove by our hands...
Is it good for rough use ? Does it has enough power i try to find something small with good battery fit anywhere and strong power is there anything outhere ? For professional use
Amazing 😍
Excelente lo uso para todo
Good video
Подскажите, пожалуйста, аккумулятор в Bosch Go с защитой стоит или нет?
okay... seems convincing enough
Bosch 💪👍👌
Precios
need light, that will be better
After one year I picked it and the battery was dead so I charged it after spending one hour to look for the charger but then remembered it came with a USB cord only so after charging it, it wasn't responding to power buttons clock or anti clockwise but then after 2 days I figured out that you need to press it against the screw /drill etc. , so far the Mi tiny screwdriver is the best though it could be powerful for a perfect handy dandy solution. For many others the charging adaptor and port plug is obsolete and if you misplace them it's harder to find the exact voltage one.
Scheint mir irgendwie schwer zu bestellen sein, selbst wenn man Mitarbeiter bei Bosch fragt. Ist das ein offizielles Bosch Produkt? Bei Wish krieg man sie. Original oder Fälschung?
In manchen Staaten werden Bosch (blau) Modelle verkauft, welche in Deutschland oder Österreich nur als Bosch (grün) erhältlich sind. Ob dabei in diesen blauen Modellen bessere, sprich langlebigere Teile verbaut werden, entzieht sich meiner Kenntnis.
Gem. Bosch Stuttgart sind die Geräte unter der Hülle identisch.
nice tool can you clarify how much torque (N.m) this screwdriver has ? thanks
2.5 to 5nm depends on the eClutch Settings you've set...
5nm in clutch level 6
Im sadly reporting that the electronic clutch (torque limiter) is so high that even the lowest setting will damage any electronics, computer cases and even plastic household appliances.
This tool is useful for carpenters and alike only
Two days i search on internet I am suspect to this product have more power than nead.Min is 2.5N/M.Now you give me ansver.It destroy plastic.Thank you for review
It doesn't reduce power. The e-clutch is a auto-stop function when a specific torque is reached, like a torque wrench
@@santhoshsamuel1055 perfect.
Nah, you shouldn't be using power tools on fragile or sensitive equipment in the first place.
you arent supposed to be using a power tool on sensitive objects lol, thats what handheld screwdrivers are for
WHATS THE MUSİC USED İN THİS VİDEO PLS HELP ME FİND İT
Et les avant trou comment les faire
ヤフオクで買った。本体1円、送料、下に小さく8000円。
How much of cost please tell me
革命不一定從北至南。
君不見
南向北一直順风順水
一路向西- 这3级片很不错
How kany hours to charge
Thats machine price
excellent open the electronic devices
Please give me rate list
Good idea, but bad design. This screwdriver has no electronic or mechanical stop. This means the screw makes 3 to 5 revolutions once you stop. This makes it impossible to make all screws same height etc.
Thank you for review.It help me to my decide.This product is not for me.
No it will stop as soon as you lift it
@@santhoshsamuel1055 Or it can be turned off in place on the reversing switch
MicroUSB...
price
Around 2600/-
Uncontrolled and wears bits rabidly
Machine are very very good but price are very high
3000 only
@@dhimanz461 itnai mai acchi quality ki koi or bi aa skti h baki boah bi kaffi acchi hoti h
Ok. for only soft wood or plastic maybe can't support to hard wood.
Hii
Fgb
Push for tight :D shittest thing I ever seen. If you push screw its fall off to floor.
why release a video in English if you're not gonna bother to correct glaring mistakes
Hii