Also, I’m kind of curious because I feel like you could just kind of push that in. Is there any type of brace that someone can make to stop it from pushing in that would sit behind the trim cover
Most people don’t use their rear wipers, and as stated I know this mod isn’t for everyone. I wouldn’t even call it a safety item. You use rainx or get your rear glass ceramic coated you didn’t even need a wiper. But to answer your question it’s 95% for looks
I guarantee you get caught in a hard storm and no coating on the window is going to help you see out the back. I would also bet that over time the rubber sticker will become compromised from the elements and there will be a leak. Also, someone comes up to your car and pushes on it you're also eff'd. Just a bad design overall.
@@chebrneck the guy that pushes on it to cause damage would be the same guy that'll break off the wiper arm because they're worthless humans. It's a 1:1,000 chance that it happens. There's always an a-hole somewhere. Can always pop a decal over it to hide the "button" and add a little more waterproofing. If a storm is so bad that a coating isn't helping that little wiper arm isn't doing much, either. I live in Florida with monsoon storms and rarely use the rear wiper. The 11" wiper blade doesn't provide much clearing anyways. Water rolls right off the ceramic coating without issue, even in heavy rain.
Why do people drive down the road with their rear wiper on when it’s not raining? The switch is easy to bump into and the wiper goes on. I wish they put a momentary switch in instead. Push the button, it wipes and shuts off. No more dry wiping.
Did you not get my email? I sent an email. Plugs were pre order, I was waiting on one part to finish them all which I got today all plug orders are going out tomorrow 😁
Hey, I do give shipping info you should have got an email. These were a pre-order item where I was waiting on one more thing to come in. All orders went out today. Send me a message on Facebook and I’ll get you all your shipping info 😁
@@HoustonSpeedFreaks I'm trying to install this plug. The exposed portion of your product has a brown cover over it... It isn't peeling off, and I don't want to damage the portion that's visible outside. What the heck is up with this thing?? REPLY TO ME ASAP as the vehicle is taken apart.
I just installed this product. I also disconnected the wiper fluid hose and plugged it off to prevent wiper fluid from ever spraying the rear glass.
Looks good! Made a big difference! Very nice and clean looking
I appreciate that man and glad you like it 🙏😁
Looks sickkkkk
I appreciate it 🙏❤️
Ya I’ll take one
Link is in the description to my website 😁
Also, I’m kind of curious because I feel like you could just kind of push that in. Is there any type of brace that someone can make to stop it from pushing in that would sit behind the trim cover
That’s why I recommend using a small amount of black silicone, you couldn’t accidentally push it in you would definitely have to do it on purpose
My thought would be to over lap it with a larger piece of 2” 3M VHB tape if you feel it might be an issue. The double layer should hold pretty well.
Great job bro. On both design and install video!!!
I appreciate it brother 😁🙏❤️
Why would you want to delete a safety item?
Other than looks ?
Most people don’t use their rear wipers, and as stated I know this mod isn’t for everyone. I wouldn’t even call it a safety item. You use rainx or get your rear glass ceramic coated you didn’t even need a wiper. But to answer your question it’s 95% for looks
I guarantee you get caught in a hard storm and no coating on the window is going to help you see out the back. I would also bet that over time the rubber sticker will become compromised from the elements and there will be a leak. Also, someone comes up to your car and pushes on it you're also eff'd. Just a bad design overall.
@@chebrneck the guy that pushes on it to cause damage would be the same guy that'll break off the wiper arm because they're worthless humans. It's a 1:1,000 chance that it happens. There's always an a-hole somewhere. Can always pop a decal over it to hide the "button" and add a little more waterproofing.
If a storm is so bad that a coating isn't helping that little wiper arm isn't doing much, either. I live in Florida with monsoon storms and rarely use the rear wiper. The 11" wiper blade doesn't provide much clearing anyways. Water rolls right off the ceramic coating without issue, even in heavy rain.
@@STFL56 except your kid who saw you put it in will go up and push on it because that looks like fun.
@@chebrneck good thing I don't have kids. 😂
Keep up the ford explorer videos!!!
Just dropped another one 😁💪
Just being curious, why do people want to delete the rear wiper?
It’s mostly for aesthetics honestly as it helps make the rear end look much cleaner.
Why do people drive down the road with their rear wiper on when it’s not raining? The switch is easy to bump into and the wiper goes on. I wish they put a momentary switch in instead. Push the button, it wipes and shuts off. No more dry wiping.
Is this ever coming back in-stock?
Yes I’ll have more ready on Thursday 😁
Nice ! willl this work on a 2017 explorer xlt ?
Haven’t had anyone try it yet but I feel like it’s the same size
STILL waiting on mine to ship???
Got my LEDs today.
Did you not get my email? I sent an email. Plugs were pre order, I was waiting on one part to finish them all which I got today all plug orders are going out tomorrow 😁
sorry to bother if you have answered this question many times, when will they be in stock again? thank you!
No you’re all good I’ll have more back in stock in a week or so waiting on supplies to arrive 😁
@@HoustonSpeedFreaks you are the man! just ordered mine!
You can always throw a small piece of paint protection film over the area. Maybe trace out over a coke can and use that size
On the backside absolutely 😁
How does it hold up to pressure washing with just the 3m tape?
It holds up fine with pressure washers 😁
I’m in
I put the link in the description to my website 😁
I am in Pa and want one....contact him or you?
Contact who lol that is me 🤣 but you can go to my website and get one 😅 houstonspeedfreaks.com
I ordered this a couple days ago. Do you not give shipping information?
Hey, I do give shipping info you should have got an email. These were a pre-order item where I was waiting on one more thing to come in. All orders went out today. Send me a message on Facebook and I’ll get you all your shipping info 😁
What kind of silicone would you recommend? Silicone sealant or silicone adhesive?
Silicone sealant 😁
I hope no one thinks it’s a button then press it 😂
Imagine 🤣🤣🤣
@@HoustonSpeedFreaks
I'm trying to install this plug. The exposed portion of your product has a brown cover over it... It isn't peeling off, and I don't want to damage the portion that's visible outside. What the heck is up with this thing?? REPLY TO ME ASAP as the vehicle is taken apart.
You peel it off it’s a protective cover for the acrylic
@@HoustonSpeedFreaks
Shit. It ain't coming off..
Nervous about damage
Check your Facebook messenger easier to reply and you can call me on there 😁