Hello Dr Dave. I am subscribed and I love your channel. I used to love pool but I got old and don't play anymore. But it's always nice to watch you and Efren Reyes. Keith
@@DrDaveBilliards You must love Efren he is quite the guy. A true gentleman player. He is truly amazing. Keith Kuhn KK Motion Pictures Promo Type it into RUclips Thanks doctor
I am going to vaccuum my table right NOW (9 months old... but I never did that!) ... plus a damp cloth after... looking forward to see the difference! Thanks!
Thanks for telling everyone about using a Magic Eraser for cleaning a cue shaft. I've been doing this for years. Instead of water, I use a little rubbing alcohol. It seems to work better and faster than water for me. I loved seeing you use a damp cloth to wipe the table. I used to do that at my local pool hall. Our pool hall would replace the Simonis Cloth every year! If only they would have practiced our cleaning methods! Now if only I could get everyone to leave their chalk face up!
I thought the balls were starting to play a little different now that they are getting chalky. The intricacy and complexity of this game is what just keeps drawing me in. Every minute factor changes the game. I don't go to bars, but I would imagine none of them around here clean the table or the balls. Thanks for keeping me on the right track Doc.
Perfect timing, I cleaned my table and balls yesterday and said to myself someone must have a video out there on how to do this properlt and I open mt pgone 5his morn8ng and there it was. Thank you for this video and all of your others I've enjoyed since I found your series.
I clean my balls regularly, at least once a week. Without that you won’t get the sheen and finish you’re after. All the friction against the cloth can get your balls dirty quick.
Good info thanks. I'm going to try burnish my pool shaft I sanded with 220 down to wood and applied hemp seed oil, sanded w 320 and same it is smooth but not "shiny". That shaft I tried the magic eraser but the oils and grime were too deep it needed the sand, got rid of all the dings and dents but did make the shaft slightly smaller in radius probably not very noticeable. Cost me $10 for the hemp seed oil and got lots left, I don't have the tools to apply an epoxy and that would prob cost more. It works for me I'm happy.
Great video Doctor! Thanks for giving the cleaning and maintenance tips for the equipment! I love to watch your videos. There is always something new to learn!
Thanks for bringing this together in one place. I would like to add to keep the bristle brush vacuum attachment clean and dry. If the vacuum is used elsewhere it is not good to bring foreign material to the cloth. Dish soap and hot water work well on the attachment brush.
Brilliant as always!! I'm literally having a table installed tomorrow at home, was looking for a video as to how properly maintain the table, this one sorted me out, MANY THANKS!!!
If it doesn't have a high quality cloth like Simonis on it, you should not use a vacuum on it. They can and do raise a nap on the cheaper felt choices.
Thanks Dave - I really liked the video. I have been using my Dyson cordless vacuum with the bristle brush (like the brush you showed in the video) and it works great. Previous to that I had been using a pool brush as on many pool forums people make a big deal about vacuuming a table but I found the vacuum picks up debris (chalk, dust, etc) way better than a horse hair brush and it's way easier. I guess using a vacuum with a beater brush might be bad for some types of cloth but there is no way using the bristle brush is bad for the cloth because it's no different than the pool brush except it sucks the debris off of the table. I was just practicing earlier and thinking I need to clean my balls and right after playing I see this video so the timing was funny. I really need to go buy some Aramith pool ball cleaner as I was just going to use soap and water.
Wow, just wow, for a novice like me whos just bought her first pool table set, I am so glad ive found your channel! Thank you for the informative video!
If you want help with learning how to play properly, there are lots of good videos under the various topics here: billiards.colostate.edu/tutorial/ Obviously, start with the "Fundamentals" stuff. I also have lots of other good advice and help for beginners here: billiards.colostate.edu/beginner-help/ Enjoy, and good luck with your game!
Very cool. ALOT of stuff I never knew! Just received my first pool table from a friend, and wasn't quite sure how to clean the cloth. It's not horrible (no rips/tears) but it is kinda dirty since the kids didn't maintain it like you described. Guess I have some work to do now! Thanks!
Dr. Dave: As a fellow mechanical engineer, I love your attention to detail, and your scientific approach. You're a national treasure as far as I'm concerned!! I'm getting interested in pool again despite not playing much in the past 10 years thanks to you. Any tips on how to level your table? I own a 4-1/2 X 9 Diamond Professional, and have a machinists level. I know I have one edge on the long rail where a slow rolling ball will roll away from the cushion when about 2 feet from the corner pocket. So I'm not sure if additional shimming is needed, or if I should just use the leveling screws in the leg pedestals. Wouldn't want to make things worse. I've thought maybe I should just hire a pool table installer here in Reno to tweak things, but I like knowing how to do things myself.
I’m glad you like my stuff. I don’t have info or much experience with leveling Diamond tables, but I think there some good YT videos on this topic if you do a search.
Let the binge begin; although, you don't have that kind of time available with all you RDS Live Stream work. I look forward to seeing how the next tournament goes.
@@DrDaveBilliards you are correct! No more free time! I am awaiting for people to reach out to me before i schedule the next start date for tournament number 2!!
Me (thinking to myself): I have a question about pool. Dr. Dave: Here's a high quality video with the precise answer. Me: How did he know? Dude reads my mind.
If you have closed pockets, vacuum and wipe down in there too! I used to play free in exchange for cleaning the tables at my local poolhall. Now its closed, havent played in over a year. I miss pool so much.
Let me start by saying how much I love tour videos! Is it safe to vacuum the felt? Does it not pull/stretch the material? Thx again and keep up the top notch work
It is not a problem. Most pool hall and home table owners vacuum their tables. I have for many years. Although, I wouldn’t use a powerful Shop Vac or a vacuum with power-scrubbing attachments.
As someone who has covered tables for many years, I would caution the use of a vacuum cleaner to clean on table that has 3 slates (as most 4-1/2 by 9 tables do) or you might suck up the plaster that seams the slates (there would be 2 seams and yes some repairman use wax for the seam-same result possible) and then have to recover the table.
Thank you and you're welcome. I don't have any specific brand recommendations, but it doesn't really matter. For more info, see: billiards.colostate.edu/faq/cue/selecting/
Great video, Doc! I've long awaited your tips on how to clean the table. Your advice on using a vacuum and lint roller run counter to what I have seen in many places, including what I was told by the retailer who sold me my table. Their advice to only use a brush seemed ineffective. What do you think about comments I've seen indicating that a vacuum can pull the felt off the table and leave it loose? I've been using my Dyson handheld with the mattress attachment, as that seems to hold the felt down while the vacuum goes over the table. But watching this... maybe it doesn't matter? I'm now very tempted to get a Roomba! :D
i have 6 7ft tables and 1 9ft table. I love the roomba. the suction isn't too powerful and the bristle brush is soft. i have to clean often because the tables get a lot of play. it doen't seem too rough for my simonis felt. i say get it
Hello DrDave. Thank you so much for the frequent answers you always give to the community. I've a problem: I was cleaning my ferrule with the mr clean magic eraser but my tip (medium hardness) got wet. Should I change my tip or I can still play with it?
Getting the tip wet isn't a problem. In fact, the tip is often wet on purpose before burnishing. See step 9 in my "HOW TO REPLACE A CUE TIP … No Special Tools Required" video: ruclips.net/video/ta5M0uCKkZU/видео.html
Great video, Dr.! Good to know I've been doing most of this right. I use a Magic Eraser dampened with 70% (or 91%) rubbing alcohol. (I avoid water as much as possible.) I use a Jacoby Hybrid Elite (skinny) shaft, made up of 140 individual pieces of laminated maple. I'm going to use your table cleaning method whenever I can get back to my usual pool room...damned covid.:-(
@@DrDaveBilliards actually no, I unfortunately don't have room in my home for a table, but as an Officer , I care for the Diamond we have at our American Legion. Vacuuming and microfiber cloth wiping with a woolite/water mixture (as told to do so by Diamond) . I did laugh my butt of when you put the roomba on the table tho!! Good content as always, love your videos.
I’ve used that aramith ball cleaner and although it does a great job at making the balls shiny I swear it makes the balls play different especially down the rail idk it could just be me but I noticed it the first time I used the product.
My experience and testing show that the balls play normal after cleaning with Aramith. See the video and info here: billiards.colostate.edu/faq/ball/cleaning/
You know, you can also use Predator Revo Wipes to clean the Predator carbon fiber pool shaft. I also heard there’s a brand called “Chalk-Out” which wipes off chalk debris on the pool table. If possible, I can use a homemade DIY pool ball cleaner machine that’s made from large paint can, a woolly polisher device, and an old woolly rug to clean and polish pool balls. And yeah, if the pool balls are dirty and very dull, they’re not able to roll on the table effectively, isn’t it?
I was about to make a Roomba comment then you put your Roomba on there. . . Well with older cloth it may not be good to use a Roomba because it seemed to make mine worse. 🤣
Love the part where you are showing the quote on quote opponent which is you with the hat on showing him eating, drinking, using talcum powder and putting the chalk face down on the table. What a rookie lol. Funny stuff.
If you want to see more like that, check out my "POOL ETIQUETTE ... Everything You Need to Know" video: ruclips.net/video/8UdqaV05Kuk/видео.html Enjoy!
to clean my pool table, i like to use the simonis cleaning system... dont now the name, something with an x :D however, it does an amazing job getting the chalk out of the cloth
By "better," do you mean "more?" Regardless, I don't think cleaning the cushions make much difference in how they react to spin. Although, older and dirtier cushion cloth will tend to react to spin more, especially in humid conditions.
I thought that would be a more-effective presentation rather than just saying "don't do it." My favorite part was the peanut butter ball-in-hand demo. :)
@@DrDaveBilliards I’ve actually seen that irl but with bbq! Guy licked his fingers and with the chicken still in his mouth ready to shoot! His fingers were sticky😂 the peanut butter part was my fav too. Hilarious🤦♂️😂
So 1-8 are Solid, and 9-15 are Stripe I Remember the First Time I Played Pool, I was 10, We were at the Red Lodge Bowling Alley, that had a Pool Table in the Back, I hit a Stripe in So I was Stripes, I learned fast the Rules of Pool.
Hi Dr.Dave love the videos! I have a question. You seem to not be concerned about using a vacuum on the felt. Yet others say it’s bad. I have Simonis 860 and a cordless Dyson vacuum. Would the rotating bristles be too much for the table? Any input would be great! Thanks
Some people consider rotating bristles too aggressive for the cloth. I agree a simple non rotating brush is preferred. That’s what I have on the hand-held vacuum in the video.
Hi Dr. Dave, I have a question. Recently, I haven't been able to do a good top spin when I play, but draw shots are fine. I thought I was not hitting the cue ball high enough, but then I tried using my friend's cue and it worked just fine. I haven't changed my tip for 3 years, but there's still around 0.3cm left of it and it's also dime shaped. Do you have a possible explanation for this? Is it possibly caused by my tip? Thanks.
If you are miscuing with the same stroke and hit as with your friend's cue, then the tip might need a scuffing. But first use a marked CB or a stripe to make sure the chalk mark on the ball is at the same height with each stroke.
@@DrDaveBilliards Thank you for answering Dr. Actually, I don't miscue during the shot, the topspin simply doesn't activate for my cue. I'm really bedazzled by this phenomena and hope that there isn't a more severe underlying problem with my cue as a whole.
@@derickbergouser2439 If you are not getting good follow action, the tip is not contacting the CB high enough. It is that simple. For more info, see the info, videos, and links here: billiards.colostate.edu/faq/sidespin/maximum/
Thanks Dr Dave! Are you worried about using vacuum attachments or brush rotors with bristles that are too stiff? I worry about abrading my cloth. I see you going pretty hard at the cloth when wiping it down, though, maybe modern cloths (Simonis) are pretty tough?
DrDave, thanks for this awesome vídeo! A question... Whats the height of the cushions in a pool table? Here on Brazil se dont have this pool tables, i what to adapt my table to this pool table model with larger pockets and 57mm balls...
In re: cleaning the table: you didn't mention cleaning the bottom of the pockets (for drop pockets). Dust gets on the balls and collects at the bottom of the pocket.
How to know when my simoni’s 860 is worn enough to warrant replacement? Mine seems to be a little threadbare. It’s about 8 yrs old and I try to play around an hour a day. At 77 yrs old they’re light sessions, and I don’t jump and rarely mass’e.
Hi, I have a Brunswick GC4 table at home and I also play at a pool hall on GC3 tables. On my table the balls (Aramith TV pro) seem to roll less then on the hall's tables and my table feels slow. Lately I selected a 860HR cloth against the 860 that I had been using and that made the table play like the pool hall's that have the 860. I was wondering what can make similar tables play differently. Could it be the type of the slate ? Mine is light colored and the surface is not smooth to the touch (like "corduroid") and the GC3s have a very smooth black slate... I have even installed heating elements to make sure the problem is not moisture ....
The cloth and cushions (and rail support) are the only things that affect how fast the table plays, but the cloth and cushions can also be affected by cleanliness, wear, cloth tightness, and humidity.
@@DrDaveBilliards Thanks for the reply! I make the comparison when the cloth is brand new and installed by the same pro technician. I have the table for 10 years. The bounce of the rails is similar . The way balls run and stop on the cloth is different when both tables have the same 860 cloth....860HR on my GC4 (that is supposed to be faster) plays as the 860 on the GC3s....
I don't have any experience with old directional-felt cloth, so I don't know. I would think if you vacuum directionally with a brush attachment, it would be fine; but, again, I don't really know.
Car wax is not a good choice. It reduces throw too much, and then the throw amount changes a lot during play. For more info, see the 2nd video and related info here: billiards.colostate.edu/faq/ball/cleaning/
Here: drdavebilliardtshirts.com/ Unfortunately, the version with the face on it is no longer available (although an alternative with the text is). Earl didn't want his image used.
I've heard different opinions on using the hose attachment for a Dyson vacuum. Do you think it's safe to vacuum the cloth this way or is the Dyson too powerful?
im here because of the new trending vlogs of many content creators whom their wives are cleaning their billiard table by washing it using water with soap and using brush😂
Got a question...I recently bought your book the illustrated principles of pool...what do you think of those cue lasers? Can they really help improve my aim and markmanship?
They might help some people, but I honestly don't like them. There are much better ways to improve your fundamentals and shot making. Many can be found here: billiards.colostate.edu/tutorial/fundamentals/ and here: billiards.colostate.edu/faq/advice/improving/ Enjoy!
Great video, thanks! Curious... what brand/model of vacuum are you using in this video? I can’t quite make it out. It looks ideal for my needs, but I am not finding it online. :)
hi dr dave. sometimes my cue ball jumps after hitting the target ball when i take followshot,according to your video , the cue ball dirty? 11:11 , i don't know much english. thankyou sir from vietnam.
I don't know of anything. Cleaning products with solvents like alcohol can be problematic per the video and articles in the 3rd section here: billiards.colostate.edu/faq/ball/cleaning/
I hope you can answer my question . I am playing snooker 3 hours every day with aramith tournament champion snooker balls, should i clean the balls with the aramith Ball cleaner every week or after every day of use?
I just bought the Predator arcos 2 balls, and they appear a little yellow. Is that how it is supposed to be? If not, is there a way I can whiten them without harm?
@@DrDaveBilliards I concluded that the yellow is totally normal, and since the color does not appeal to me, I decided to return them. I will settle for the aramith blacks now
*Contents:*
0:00 - Intro
0:24 - Cue Care
2:12 - ---- carbon fiber
3:29 - Cue Tip Care
4:16 - ---- shaping
6:22 - Table Care
7:43 - ---- vacuuming and wiping
10:47 - Ball Care
11:46 - ---- cleaning and buffing
12:54 - Wrap Up
13:30 - ---- montage
*Supporting Resources:*
- caring for a cue resource page: billiards.colostate.edu/faq/cue/care/
- cleaning a table resource page: billiards.colostate.edu/faq/table/cleaning/
- ball cleaning and surface treatment resource page: billiards.colostate.edu/faq/ball/cleaning/
- how to chalk properly: billiards.colostate.edu/faq/chalk/how-to/
- cue tip harness effects: billiards.colostate.edu/faq/cue-tip/hardness/
- how to replace a cue tip: billiards.colostate.edu/faq/cue-tip/replacing/
- chalk testing and comparison resource page: billiards.colostate.edu/faq/chalk/comparison/
- cling/skid/kick resource page: billiards.colostate.edu/faq/throw/cling/
- miscue resource page: billiards.colostate.edu/faq/foul/miscue/
- pool etiquette: billiards.colostate.edu/faq/advice/etiquette/
- T-shirts, polos, mugs, caps, posters available at: drdavebilliardtshirts.com/
Hello Dr Dave.
I am subscribed and I love your channel.
I used to love pool but I got old and don't play anymore.
But it's always nice to watch you and Efren Reyes.
Keith
@@KTHKUHNKK I'm glad you like my stuff even if you don't play anymore. And I especially like being included with the same sentence as Efren! Thanks!
@@DrDaveBilliards
You must love Efren he is quite the guy.
A true gentleman player.
He is truly amazing.
Keith Kuhn
KK Motion Pictures
Promo
Type it into RUclips
Thanks doctor
@@KTHKUHNKK I am a fan of Efren. See my "Top 10 Efren Most Famous Shots" video:
ruclips.net/video/V1czUp9k2Uk/видео.html
Is that you in the promo?
@@DrDaveBilliards hello Dr Dave how I can cleany felt on my snooker table
You, sir, are a gift to the billiards community!
Thank you. I aim to swerve. :)
Yes
My wife just yelled out what the fuck are you watching when you said wear a playing glove to keep your shaft clean 😂
Dr. Dave I can’t thank you enough for all the work you put into these videos. Thanks a ton.
You're welcome. I'm glad you enjoy and benefit from my stuff!
I am going to vaccuum my table right NOW (9 months old... but I never did that!) ... plus a damp cloth after... looking forward to see the difference! Thanks!
You’ll be amazed at the difference
Thanks for telling everyone about using a Magic Eraser for cleaning a cue shaft. I've been doing this for years. Instead of water, I use a little rubbing alcohol. It seems to work better and faster than water for me.
I loved seeing you use a damp cloth to wipe the table. I used to do that at my local pool hall. Our pool hall would replace the Simonis Cloth every year! If only they would have practiced our cleaning methods!
Now if only I could get everyone to leave their chalk face up!
Good point. Alcohol is a better solvent for dissolving grease and grime.
Oh , face down chalk makes me rage...
1:45 dr dave played a 700 series in bowling. Well done Dr dave
Good eye. I have bowled since I was 4 years old.
I thought the balls were starting to play a little different now that they are getting chalky. The intricacy and complexity of this game is what just keeps drawing me in. Every minute factor changes the game. I don't go to bars, but I would imagine none of them around here clean the table or the balls. Thanks for keeping me on the right track Doc.
Always try to keep your balls clean. :)
Perfect timing, I cleaned my table and balls yesterday and said to myself someone must have a video out there on how to do this properlt and I open mt pgone 5his morn8ng and there it was. Thank you for this video and all of your others I've enjoyed since I found your series.
I hear everything. :)
So did you do it right?
I clean my balls regularly, at least once a week. Without that you won’t get the sheen and finish you’re after. All the friction against the cloth can get your balls dirty quick.
Gangster Dave in the house 😎👍. Enjoying the maintenance tips Dr Dave. 🤩👍.
"What ... I got ball in hand?" I'm glad you liked it.
Thanks! You've confirmed all of my theories about cleaning the cloth...balls...and cue!
I'm glad to hear it. I guess great minds think alike. :)
I enjoy receiving your tips and it is not boring listening to you talk like it is with others. So please keep up the good work.
I'm glad to hear it. Thanks.
Good info thanks. I'm going to try burnish my pool shaft I sanded with 220 down to wood and applied hemp seed oil, sanded w 320 and same it is smooth but not "shiny". That shaft I tried the magic eraser but the oils and grime were too deep it needed the sand, got rid of all the dings and dents but did make the shaft slightly smaller in radius probably not very noticeable. Cost me $10 for the hemp seed oil and got lots left, I don't have the tools to apply an epoxy and that would prob cost more. It works for me I'm happy.
Thanks for the info. BTW, it is "burnish," not "barnish."
@@DrDaveBilliards lol thanks
Awesome videos, long time player, but new to owning a table so these videos are perfect!
Great video Doctor! Thanks for giving the cleaning and maintenance tips for the equipment! I love to watch your videos. There is always something new to learn!
Thanks! I'm glad you liked it.
Thank you Dr Dave! Your videos are a blessing. Thank you.
You're welcome. I'm glad you like my stuff.
Thanks for bringing this together in one place. I would like to add to keep the bristle brush vacuum attachment clean and dry. If the vacuum is used elsewhere it is not good to bring foreign material to the cloth. Dish soap and hot water work well on the attachment brush.
Good points. Thanks.
Anything I need to learn something, I always end up back on this channel
I'm glad to hear it.
Brilliant as always!! I'm literally having a table installed tomorrow at home, was looking for a video as to how properly maintain the table, this one sorted me out, MANY THANKS!!!
You're welcome. I'm glad I had good timing. Have fun with the table!
If it doesn't have a high quality cloth like Simonis on it, you should not use a vacuum on it. They can and do raise a nap on the cheaper felt choices.
Also clean out the pockets. Great video. Thank you.
Good point. My table has mesh pockets, but I should have mentioned this for the benefit of others. I'm glad you liked the video.
Thanks Dave - I really liked the video. I have been using my Dyson cordless vacuum with the bristle brush (like the brush you showed in the video) and it works great. Previous to that I had been using a pool brush as on many pool forums people make a big deal about vacuuming a table but I found the vacuum picks up debris (chalk, dust, etc) way better than a horse hair brush and it's way easier. I guess using a vacuum with a beater brush might be bad for some types of cloth but there is no way using the bristle brush is bad for the cloth because it's no different than the pool brush except it sucks the debris off of the table. I was just practicing earlier and thinking I need to clean my balls and right after playing I see this video so the timing was funny. I really need to go buy some Aramith pool ball cleaner as I was just going to use soap and water.
I'm glad the video was timely and useful.
Wow, just wow, for a novice like me whos just bought her first pool table set, I am so glad ive found your channel! Thank you for the informative video!
If you want help with learning how to play properly, there are lots of good videos under the various topics here:
billiards.colostate.edu/tutorial/
Obviously, start with the "Fundamentals" stuff.
I also have lots of other good advice and help for beginners here:
billiards.colostate.edu/beginner-help/
Enjoy, and good luck with your game!
Very cool. ALOT of stuff I never knew! Just received my first pool table from a friend, and wasn't quite sure how to clean the cloth. It's not horrible (no rips/tears) but it is kinda dirty since the kids didn't maintain it like you described. Guess I have some work to do now! Thanks!
I'm glad to hear it. Have fun with the table!
thanks for sharing these tips. slowly getting through some of your other shot technique videos. 👍 great content
You've got a long road ahead. I have over 530 videos on RUclips now! Enjoy!
so helpful
Thanks Dr Dave
You're the man!!
You're welcome. I'm glad you liked it.
Thanks Dr Dave I always look forward to your videos they really help
You’re welcome. I’m glad to hear it.
I just finished your video and I noticed Doofus Dave 😆
I was happy to be able to give Doofus Dave a cameo appearance. He hasn't been out in a while.
😀
Thanks Dr Dave!
You're welcome! I aim to swerve. :)
Played a game of pool at a bar last night... It's the best feeling going out and playing on someone elses table! Mine needs a break! Lol.
How I wish to have my own table to play and to maintain on
Oh, that also gives me inspiration to write and create books.
Thanks Dr. That's a Beautiful Table👍
You're welcome, and thank you. The table was previously owned by the late, great Robert Byrne. I treasure it because he was a hero of mine.
Dr. Dave:
As a fellow mechanical engineer, I love your attention to detail, and your scientific approach. You're a national treasure as far as I'm concerned!! I'm getting interested in pool again despite not playing much in the past 10 years thanks to you.
Any tips on how to level your table? I own a 4-1/2 X 9 Diamond Professional, and have a machinists level. I know I have one edge on the long rail where a slow rolling ball will roll away from the cushion when about 2 feet from the corner pocket. So I'm not sure if additional shimming is needed, or if I should just use the leveling screws in the leg pedestals. Wouldn't want to make things worse. I've thought maybe I should just hire a pool table installer here in Reno to tweak things, but I like knowing how to do things myself.
I’m glad you like my stuff. I don’t have info or much experience with leveling Diamond tables, but I think there some good YT videos on this topic if you do a search.
The set of balls i have always look clean and shine.
... then don't clean them until they stop looking clean and shining.
Always well done!
400+ videos so start binge watching haha
Let the binge begin; although, you don't have that kind of time available with all you RDS Live Stream work. I look forward to seeing how the next tournament goes.
@@DrDaveBilliards you are correct! No more free time!
I am awaiting for people to reach out to me before i schedule the next start date for tournament number 2!!
Me (thinking to myself): I have a question about pool.
Dr. Dave: Here's a high quality video with the precise answer.
Me: How did he know? Dude reads my mind.
I'm glad my mind-reading trick worked.
Thanks!
You’re welcome!
If you have closed pockets, vacuum and wipe down in there too!
I used to play free in exchange for cleaning the tables at my local poolhall. Now its closed, havent played in over a year. I miss pool so much.
Good point about also cleaning the pockets. I hope your pool life returns to normal soon.
Another great video, Dr. Dave! Very useful information as always!
Thank you. I'm glad you liked it.
This video is AWESOME! Thank you!
Thank you, and you’re welcome!
Let me start by saying how much I love tour videos! Is it safe to vacuum the felt? Does it not pull/stretch the material? Thx again and keep up the top notch work
It is not a problem. Most pool hall and home table owners vacuum their tables. I have for many years. Although, I wouldn’t use a powerful Shop Vac or a vacuum with power-scrubbing attachments.
Helpful 👍🏻
I’m glad to hear it.
I use my IRobot Vacuum to clean my table too! It’s the best!
I call mine "WALL-E." He is such a good boy.
@@DrDaveBilliards I call mine, Ruby!
Exactly what I was looking for! Thanks man, that was perfect. New sub
I’m glad to hear it. You’re welcome.
Greate vidio. Didnt help me tho as the pool table i have to clean is at a bar and full of alcohol and other stuff
Thanks. You can offer to clean the table at the bar. Or you can ask the bar owner watch the video. :)
As someone who has covered tables for many years, I would caution the use of a vacuum cleaner to clean on table that has 3 slates (as most 4-1/2 by 9 tables do) or you might suck up the plaster that seams the slates (there would be 2 seams and yes some repairman use wax for the seam-same result possible) and then have to recover the table.
Good point. You wouldn't want to use a powerful vacuum, especially on a loose cloth over a slate with cracked seams.
@3:22 thats me at the moment 😵💫
DrDave, yours is the best pool channel on YT. Do you have any recommendations for a good cue for a home recreational player? Thank you!
Thank you and you're welcome. I don't have any specific brand recommendations, but it doesn't really matter. For more info, see:
billiards.colostate.edu/faq/cue/selecting/
I've been waiting for this one 👍👍👍
I'm glad the wait is over, and I hope you liked it.
thanks for the video
You're welcome.
Great video, Doc! I've long awaited your tips on how to clean the table. Your advice on using a vacuum and lint roller run counter to what I have seen in many places, including what I was told by the retailer who sold me my table. Their advice to only use a brush seemed ineffective. What do you think about comments I've seen indicating that a vacuum can pull the felt off the table and leave it loose? I've been using my Dyson handheld with the mattress attachment, as that seems to hold the felt down while the vacuum goes over the table. But watching this... maybe it doesn't matter? I'm now very tempted to get a Roomba! :D
I don't think a vacuum is a problem unless the cloth is very loose and the vacuum is super powerful.
i have 6 7ft tables and 1 9ft table. I love the roomba. the suction isn't too powerful and the bristle brush is soft. i have to clean often because the tables get a lot of play. it doen't seem too rough for my simonis felt. i say get it
If using a vacuum like dirt devil or anything with beater brush, remove that spinning brush or it can burn your cloth.
Hello DrDave. Thank you so much for the frequent answers you always give to the community. I've a problem: I was cleaning my ferrule with the mr clean magic eraser but my tip (medium hardness) got wet. Should I change my tip or I can still play with it?
Getting the tip wet isn't a problem. In fact, the tip is often wet on purpose before burnishing. See step 9 in my "HOW TO REPLACE A CUE TIP … No Special Tools Required" video:
ruclips.net/video/ta5M0uCKkZU/видео.html
thank you Dave!!👏👏🥳
You're welcome! I'm glad you liked it.
Great video, Dr.!
Good to know I've been doing most of this right. I use a Magic Eraser dampened with 70% (or 91%) rubbing alcohol. (I avoid water as much as possible.) I use a Jacoby Hybrid Elite (skinny) shaft, made up of 140 individual pieces of laminated maple.
I'm going to use your table cleaning method whenever I can get back to my usual pool room...damned covid.:-(
COVID has definitely been a major bummer for pool.
Hahaha lol.., nice vid and humor😁🎃😂 doctor tip 👍🏻👍🏻, you got my subscribed
I’m glad you liked it. Welcome aboard.
Roomba!..... love that idea!!
You must be one of those "lazy" people I was talking about. :)
@@DrDaveBilliards actually no, I unfortunately don't have room in my home for a table, but as an Officer , I care for the Diamond we have at our American Legion. Vacuuming and microfiber cloth wiping with a woolite/water mixture (as told to do so by Diamond) .
I did laugh my butt of when you put the roomba on the table tho!!
Good content as always, love your videos.
I'm glad you like it, especially the Roomba part. :)
Never would have occurred to me. I laughed too.
@@DrDaveBilliards How many pool tables do you have Dr Dave? ;)
I’ve used that aramith ball cleaner and although it does a great job at making the balls shiny I swear it makes the balls play different especially down the rail idk it could just be me but I noticed it the first time I used the product.
My experience and testing show that the balls play normal after cleaning with Aramith. See the video and info here:
billiards.colostate.edu/faq/ball/cleaning/
You know, you can also use Predator Revo Wipes to clean the Predator carbon fiber pool shaft. I also heard there’s a brand called “Chalk-Out” which wipes off chalk debris on the pool table. If possible, I can use a homemade DIY pool ball cleaner machine that’s made from large paint can, a woolly polisher device, and an old woolly rug to clean and polish pool balls. And yeah, if the pool balls are dirty and very dull, they’re not able to roll on the table effectively, isn’t it?
Great tips
Thanks.
Magic eraser, nice.
That stuff truly is magic.
Great video!
Thanks!
I was about to make a Roomba comment then you put your Roomba on there. . . Well with older cloth it may not be good to use a Roomba because it seemed to make mine worse. 🤣
Love the part where you are showing the quote on quote opponent which is you with the hat on showing him eating, drinking, using talcum powder and putting the chalk face down on the table. What a rookie lol. Funny stuff.
If you want to see more like that, check out my "POOL ETIQUETTE ... Everything You Need to Know" video:
ruclips.net/video/8UdqaV05Kuk/видео.html
Enjoy!
"I got ball in hand?" lol that's comedy man
... umm ... peanut butter. :)
Can you do a video about the tip shape differences and effectiveness on the spin/force induced
FYI, I cover this topic in detail here:
billiards.colostate.edu/faq/cue-tip/size-and-shape/
any tips on re-shaping a tip that has mushroomed?
nm: i found the info needed in your video about changing a cue tip.
thanks for all the great info!
See:
billiards.colostate.edu/faq/cue-tip/mushrooming/
to clean my pool table, i like to use the simonis cleaning system... dont now the name, something with an x :D
however, it does an amazing job getting the chalk out of the cloth
Some people mix some Woolite into the water when wiping the table, especially if the table is really dirty.
Teach them how to clean DrDave.
Most people are not very good with "pool hygiene" (or personal hygiene). :)
roomba for the pool table. who'da thunk it. LOL. cool stuff.
I love the sound he makes when he is done. My wife and I call our Roomba "Wall-E."
Great video, DrDave. One question: Do balls react to spin better off cushions after cleaning the cushions, or does it make no difference?
By "better," do you mean "more?" Regardless, I don't think cleaning the cushions make much difference in how they react to spin. Although, older and dirtier cushion cloth will tend to react to spin more, especially in humid conditions.
Thank you. How do you remove stains and dirt marks?
I don't have any direct experience because I keep my table clean, but I've heard of some people using Woolite mixed with water.
I just had to laugh when you showed all the things you said not to do😂 too funny
I thought that would be a more-effective presentation rather than just saying "don't do it." My favorite part was the peanut butter ball-in-hand demo. :)
@@DrDaveBilliards I’ve actually seen that irl but with bbq! Guy licked his fingers and with the chicken still in his mouth ready to shoot! His fingers were sticky😂 the peanut butter part was my fav too. Hilarious🤦♂️😂
So 1-8 are Solid, and 9-15 are Stripe I Remember the First Time I Played Pool, I was 10, We were at the Red Lodge Bowling Alley, that had a Pool Table in the Back, I hit a Stripe in So I was Stripes, I learned fast the Rules of Pool.
Hi Dr.Dave love the videos! I have a question. You seem to not be concerned about using a vacuum on the felt. Yet others say it’s bad. I have Simonis 860 and a cordless Dyson vacuum. Would the rotating bristles be too much for the table?
Any input would be great!
Thanks
Some people consider rotating bristles too aggressive for the cloth. I agree a simple non rotating brush is preferred. That’s what I have on the hand-held vacuum in the video.
I heard that there are 2 kinds of pool ball cleaner Aramith Ball Cleaner and Aramith Restorer.
Hi Dr. Dave, I have a question. Recently, I haven't been able to do a good top spin when I play, but draw shots are fine. I thought I was not hitting the cue ball high enough, but then I tried using my friend's cue and it worked just fine. I haven't changed my tip for 3 years, but there's still around 0.3cm left of it and it's also dime shaped. Do you have a possible explanation for this? Is it possibly caused by my tip? Thanks.
If you are miscuing with the same stroke and hit as with your friend's cue, then the tip might need a scuffing. But first use a marked CB or a stripe to make sure the chalk mark on the ball is at the same height with each stroke.
@@DrDaveBilliards Thank you for answering Dr. Actually, I don't miscue during the shot, the topspin simply doesn't activate for my cue. I'm really bedazzled by this phenomena and hope that there isn't a more severe underlying problem with my cue as a whole.
@@derickbergouser2439 If you are not getting good follow action, the tip is not contacting the CB high enough. It is that simple. For more info, see the info, videos, and links here:
billiards.colostate.edu/faq/sidespin/maximum/
Thanks Dr Dave! Are you worried about using vacuum attachments or brush rotors with bristles that are too stiff? I worry about abrading my cloth. I see you going pretty hard at the cloth when wiping it down, though, maybe modern cloths (Simonis) are pretty tough?
I wouldn’t use stiff or rotating bristles, but damp wiping seems harmless to me. High quality cloths are tough.
DrDave, thanks for this awesome vídeo! A question... Whats the height of the cushions in a pool table? Here on Brazil se dont have this pool tables, i what to adapt my table to this pool table model with larger pockets and 57mm balls...
All pool table specs can be found here:
wpapool.com/equipment-specifications/
@@DrDaveBilliards thanks!
@@martinandredill You're welcome!
How did you get so good at the shaft stroking motion!?
Lots of practice. :)
In re: cleaning the table: you didn't mention cleaning the bottom of the pockets (for drop pockets). Dust gets on the balls and collects at the bottom of the pocket.
Good point.
How to know when my simoni’s 860 is worn enough to warrant replacement? Mine seems to be a little threadbare. It’s about 8 yrs old and I try to play around an hour a day. At 77 yrs old they’re light sessions, and I don’t jump and rarely mass’e.
If it has any tears or divots, it should be replaced. Otherwise, if you don’t mind how it plays or looks, there is no need to replace it.
Hi, I have a Brunswick GC4 table at home and I also play at a pool hall on GC3 tables. On my table the balls (Aramith TV pro) seem to roll less then on the hall's tables and my table feels slow. Lately I selected a 860HR cloth against the 860 that I had been using and that made the table play like the pool hall's that have the 860.
I was wondering what can make similar tables play differently. Could it be the type of the slate ? Mine is light colored and the surface is not smooth to the touch (like "corduroid") and the GC3s have a very smooth black slate...
I have even installed heating elements to make sure the problem is not moisture ....
The cloth and cushions (and rail support) are the only things that affect how fast the table plays, but the cloth and cushions can also be affected by cleanliness, wear, cloth tightness, and humidity.
@@DrDaveBilliards Thanks for the reply!
I make the comparison when the cloth is brand new and installed by the same pro technician. I have the table for 10 years. The bounce of the rails is similar . The way balls run and stop on the cloth is different when both tables have the same 860 cloth....860HR on my GC4 (that is supposed to be faster) plays as the 860 on the GC3s....
@DrDaveBilliards - for wood shafts, do you recommend not using wax?
I’m not a good person to ask because I’ve never tried it, and I’ve been using carbon fiber exclusively for many years now.
I have a 40 year old table with original directional felt thats still in great shape. I was told to NEVER use a vacuum cleaner on it.
I don't have any experience with old directional-felt cloth, so I don't know. I would think if you vacuum directionally with a brush attachment, it would be fine; but, again, I don't really know.
Never with the spinning brush. It burns the material.
Genius
I’m glad you like it.
Hey Dr. Dave , will car wax work just as well to clean object balls with ? Thank you for the great video by the way .
Car wax is not a good choice. It reduces throw too much, and then the throw amount changes a lot during play. For more info, see the 2nd video and related info here:
billiards.colostate.edu/faq/ball/cleaning/
@@DrDaveBilliards Okay . Thank you for the reply Dr. Dave .
Unfortunately I don't own my own pool table 😭 but this is so useful to know 👌🏼
I'm glad you think so. There is a lot of useful info in the video even for non-table-owners.
Dave, where did you get the Earl Strickland T shirt at the end of the video? Thanks
Here:
drdavebilliardtshirts.com/
Unfortunately, the version with the face on it is no longer available (although an alternative with the text is). Earl didn't want his image used.
I've heard different opinions on using the hose attachment for a Dyson vacuum. Do you think it's safe to vacuum the cloth this way or is the Dyson too powerful?
Sorry, but I don't know how powerful a Dyson is. Although, as long as the cloth isn't too loose, I wouldn't think it would be a problem.
I need that Earl shirt.
This and many other shirts are available here:
drdavebilliardtshirts.com/
hey Dr Dave, quick question, i currently use a 8 foot table and i’m thinking about buying a new table should i get a 6ft or stay with 8?
Only you can answer that. I prefer practicing on a 9’ table. That way, when I play in league on bar boxes, every shot seems short.
@@DrDaveBilliards Steve Miserak said he practiced on a 10' table at his home he felt it gave him a advantage.
im here because of the new trending vlogs of many content creators whom their wives are cleaning their billiard table by washing it using water with soap and using brush😂
Got a question...I recently bought your book the illustrated principles of pool...what do you think of those cue lasers? Can they really help improve my aim and markmanship?
They might help some people, but I honestly don't like them. There are much better ways to improve your fundamentals and shot making. Many can be found here:
billiards.colostate.edu/tutorial/fundamentals/
and here:
billiards.colostate.edu/faq/advice/improving/
Enjoy!
Great video, thanks! Curious... what brand/model of vacuum are you using in this video? I can’t quite make it out. It looks ideal for my needs, but I am not finding it online. :)
I bought that vacuum about 35 years ago, so I doubt it still exist. Just search for "small canister vacuum." That should turn up some options.
@@DrDaveBilliards lol. I figured that was the case. Thanks. :)
hi dr dave. sometimes my cue ball jumps after hitting the target ball when i take followshot,according to your video , the cue ball dirty? 11:11 , i don't know much english.
thankyou sir from vietnam.
Firm follow shots also cause the CB to hop naturally. See:
billiards.colostate.edu/faq/follow/ball-hop/
I just wanted to know if there's any use of water in a pool that isn't for swimming
Frogs probably like it.
any other cheap product i can use instead of the aramith cleaner ?
maybe something from kitchen ?
I don't know of anything. Cleaning products with solvents like alcohol can be problematic per the video and articles in the 3rd section here:
billiards.colostate.edu/faq/ball/cleaning/
I hope you can answer my question . I am playing snooker
3 hours every day with aramith tournament champion snooker balls, should i clean the balls with the aramith Ball cleaner every week or after every day of use?
I only clean my balls when they seem dirty or when they seem to be playing differently. Once a week is probably good.
@@DrDaveBilliardsthank you you dr. Dave
You're welcome. I aim to swerve. :)
I just bought the Predator arcos 2 balls, and they appear a little yellow. Is that how it is supposed to be? If not, is there a way I can whiten them without harm?
I have a set too. They do seem to have a slight ivory tint. I can't imagine anyway to whiten them, nor do I see a reason to do so.
@@DrDaveBilliards I concluded that the yellow is totally normal, and since the color does not appeal to me, I decided to return them. I will settle for the aramith blacks now
Can you spray color back into an old pooltable cloth??
Dye would be better than paint.