Это видео недоступно.
Сожалеем об этом.
John Deere 450-C Hydraulic Fluid Change
HTML-код
- Опубликовано: 13 июн 2020
- #jd450c, #jd450-c, #jd450, #johndeere, #jddozer
This is a video showing the work that I did to change the hydraulic fluid on the John Deere 450C track loader. The hydraulic filter fell apart in the tank and it needed to be pulled out and cleaned.
I filled the tractor with 303 universal tractor fluid and its back up and working fine.
John Deere 450-C specs:
Dimensions
Width Over Tracks
6ft in
Specifications
Engine
Number Of Cylinders
4
Engine Make
2240
Engine Model
300 Series
Net Power
65hp
Power Measured @
2500rpm
Max Torque
178lb ft
Displacement
219cu in
Torque Measured @
1300rpm
Aspiration
Turbocharged
Operational
Operating Weight
14400lb
Fuel Capacity
31gal
Cooling System Fluid Capacity
4gal
Engine Oil Capacity
2.3gal
Hydraulic Fluid Capacity
7gal
Final Drives Fluid Capacity
1.6gal
Operating Voltage
12V
Transmission
Transmission Type
HLR:4 speed ranges with high, low and reverse
Number Of Forward Gears
4
Number Of Reverse Gears
4
Hydraulic System
Pump Type
Open Center
Relief Valve Pressure
2250psi
Pump Flow Capacity
14gal/min
Compare similar models
Manufacturer/Model
Net Power
Operating Weight
John Deere 450B
65 hp
14500 lb
Case 455C
63 hp
14431.5 lb
John Deere 450D
67 hp
14400 lb
Can you clean the site view from inside the tank with a rag
Sure.
Could you show a video of where and how your auxiliary outlets hook up from hydraulic power source. Wanting to pull a scraper with mine.
I will try and get one next time I am out there. It is a full time flow line though, so you would need to add a diverter valve in there to operate the scraper up and down. This setup was for a backhoe with valves on the hoe.
How do you change transmission oil... I've got milky oil leaking out around pto shaft
There is a drain plug under the transmission and a filler under the seat. Also change the filter in the front grill.
@@SeidelRanch Thnx 4 the time... Good Karma awaits You.
Hi did you clean the siv on the bottom off the tank
I did clean out the tank but don't remember seeing anything at the bottom. The draw for the pump in mine is a metal tube that comes up half way in the tank.
@@SeidelRanch that's the return there's a metal cup with a handle you push down and the whole unit comes out with the filter
@@andrewstewart9054 I need to check that. I did not see that and could be part of the slowness I have been seeing. It's always been slow so I figured it was just the flow of the unit. Thanks for pointing that out. I will see what it has.
What's the filter number and gasket number? The john Deere dealer can't find it.
The filter in the reservoir can been seen here: partscatalog.deere.com/jdrc/sidebyside/equipment/73571/referrer/navigation/pgId/259775
@@SeidelRanch Thanks alot! super useful info!
@@Pause0 Thanks. Glad it was helpful.
Need to clean up the whole area..is dirty..
I agree. I should have cleaned it up much better. Luckily after all this was done it got a good bath.
Can you clean the site view from inside the tank with a rag
You probably can, but I pulled mine off to clean it really good when it was empty.