Hello. Love the video as its gave me an understanding of what I need to do. Quick question please... how did you get your internal channel inside your skirting? Or do you know the best way to it?? Thanks in advance 👍🏻
@Steven Flosi - Thank you for watching my channel and your kind comments. I did not use a connector because connector with time catch rust and moisture and stop working. I solider all my joints with using a 0.5sq wire. vi.raptor.ebaydesc.com/ws/eBayISAPI.dll?ViewItemDescV4&item=291366582086&category=20705&pm=1&ds=0&t=1519380967000&ver=0&cspheader=1 This Led strip a 12v with high 14watts per meter so due to the heat I am using the aliminum corner profile as conductor to release heat and looks nice. I should use a smoky effect diffuser aswell. Simple and effective result. Please subscribe to my channel. I have excellent bathroom Led lighting coming in few days on my channel. Just added Kitchen Led lighting strip video. Please Check it out.
Thank you for your comment, I will make another video for you and show what you have asked. There is no need for me to use a sensor at the bottom because my staircase is not that steep, as soon as I enter the stairs at the bottom the PIR sensor range is so strong that the lights turn ON. If your stair case is long and bending then it’s right to have two sensors.
Please give links to the products you bought, I'm interested in they lights and aluminiums strips out any light diffusers you may consider.... Keri up the good work bro...I just subscribed
@Neil Wilkinson - ofcourse, The sensor is effectively a switch so you will need to run a seprate wire for that but yes all is possible. Please Subscribe to enable my videos get better with time.
@Ryan H - Thank you so much for your comments. Yep you can connect them directly to a switch for sure. Try to use a profile that will dissapate the heat depending if you use 12v or 24v and how many lumens and leds are per meter. The more leds per meter means more brightness and more power. Good luck 🤞! Please subscribe I have some good videos coming shortly. Also watch my kitchen led install I done from my other videos where I used Loox.
Sure, thank you for asking, I would recommend using Aurora Led strip lighting and using a Led profile for heat disapation. If your asking for anything in particular please let me know where I might be able to help. Please kindly subscribe to my channel.
@Aamir Ansari - Thank you for watching my channel- please do subscribe as I am working on some really interesting LED lights in bathrooms at the moment. What you see in the video is a Aluminium profile but not to conseal the strip as I left it open. I will use a diffuser profile in my next videos.
@numan amjad - Thank you for watching my channel. Please subscribe. The items I used are a mix, some from Ebay and some from Aurora. www.edwardes.co.uk/products/enlite-en-stk5-40-24-watt-12v-5-metre-cool-white-led-tape-kit?gclid=EAIaIQobChMIxbaXrY7l6AIVWe3tCh3HyA3tEAQYAiABEgJnIvD_BwE Its basic wiring nothing that needs a diagram
This question has been asked few time here but his answer is all items are from eBay. There are tonnes of items in each category. People are asking to save their time but seemed you want to keep a secret😊.
Should have stuck it on the piece of trim above facing down so the led strip wouldn't be visible when it's off.
Yes or at least stuck on the wall side facing out so they actually illuminated the stairs instead of just blinding people
L-shaped tile edging would be perfect. Attach the LED strip to the underside of the profile so it shines downwards onto the stairs instead of upwards.
Hello. Love the video as its gave me an understanding of what I need to do. Quick question please... how did you get your internal channel inside your skirting? Or do you know the best way to it?? Thanks in advance 👍🏻
Sorry, you lost me, what do you mean by internal channel
Nice idea!
hi did u wired 1 or 2 motion sensors i’m looking for 1 downstairs and 1 upstairs but not sure how to wired them
What happens if you walk up the stairs do you not need a pir at top and bottom of stairs ?
Good job brother
Thank you, just a experiment how it will look. Appreciate your comments. 🙏
wow ,very nice .
Nice work. What kind of connector did you use in the corner?
@Steven Flosi - Thank you for watching my channel and your kind comments. I did not use a connector because connector with time catch rust and moisture and stop working. I solider all my joints with using a 0.5sq wire.
vi.raptor.ebaydesc.com/ws/eBayISAPI.dll?ViewItemDescV4&item=291366582086&category=20705&pm=1&ds=0&t=1519380967000&ver=0&cspheader=1
This Led strip a 12v with high 14watts per meter so due to the heat I am using the aliminum corner profile as conductor to release heat and looks nice. I should use a smoky effect diffuser aswell.
Simple and effective result. Please subscribe to my channel. I have excellent bathroom Led lighting coming in few days on my channel. Just added Kitchen Led lighting strip video. Please Check it out.
I wish you would have shown how you connected the items. And yeah, shouldn't you have a sensor at the bottom of the stairs, as well?
Thank you for your comment, I will make another video for you and show what you have asked. There is no need for me to use a sensor at the bottom because my staircase is not that steep, as soon as I enter the stairs at the bottom the PIR sensor range is so strong that the lights turn ON. If your stair case is long and bending then it’s right to have two sensors.
Please give links to the products you bought, I'm interested in they lights and aluminiums strips out any light diffusers you may consider.... Keri up the good work bro...I just subscribed
I will add them in few Days, Merry 🎄 Christmas and a Happy New Year
Merry Christmas bro
???
Bro can you give me the links to the products you used. Or atleast the names with technical details. Nice channel keep it up bro
Please look on Ebay, all items were from Ebay.
@@thespecialist786 Dude, you're missing a great opportunity to earn some money using affiliate links of this product, think about it 😉
Hi would it be possible to have 2 motion sensors one at the top and bottom
Thanks
@Neil Wilkinson - ofcourse, The sensor is effectively a switch so you will need to run a seprate wire for that but yes all is possible.
Please Subscribe to enable my videos get better with time.
@@wendyclarke2676 sure, let me make a video for you.
Nice job looks good I'm not going to bother with the sensor though because these lights use a tiny amount of power.
@Ryan H - Thank you so much for your comments. Yep you can connect them directly to a switch for sure. Try to use a profile that will dissapate the heat depending if you use 12v or 24v and how many lumens and leds are per meter. The more leds per meter means more brightness and more power. Good luck 🤞! Please subscribe I have some good videos coming shortly. Also watch my kitchen led install I done from my other videos where I used Loox.
How long are the strips?
Hay have would u recommend anything different now from then ? Thank ypy
Sure, thank you for asking, I would recommend using Aurora Led strip lighting and using a Led profile for heat disapation. If your asking for anything in particular please let me know where I might be able to help. Please kindly subscribe to my channel.
Have you use aluminium profile on stairs
@Aamir Ansari - Thank you for watching my channel- please do subscribe as I am working on some really interesting LED lights in bathrooms at the moment.
What you see in the video is a Aluminium profile but not to conseal the strip as I left it open. I will use a diffuser profile in my next videos.
Will this light consume same power on every brightness level
Good for old people for not falling down at night
I think they'd look better suck under the aluminium they would light the stairs without seeing the light source they look ugly imo
I get your point, they are super bright so can’t see them. I’ll do another video with install under the profile.
How do you do this with a pir on the top and bottom so you never have to touch a switch?
Thank you for watching my channel. You will need to run the power wire to the pir at the bottom aswell .
Sir can u tell which components you use ?
How to install staircase Strips
And also send shematic digram of whole circuit
@numan amjad - Thank you for watching my channel. Please subscribe.
The items I used are a mix, some from Ebay and some from Aurora. www.edwardes.co.uk/products/enlite-en-stk5-40-24-watt-12v-5-metre-cool-white-led-tape-kit?gclid=EAIaIQobChMIxbaXrY7l6AIVWe3tCh3HyA3tEAQYAiABEgJnIvD_BwE
Its basic wiring nothing that needs a diagram
Thanks 😊
Where did you get your kit?
I did not get a kit, I made this by different products. Kits are not that good.
Price kiya hai sir
Did ya toss the wife down the stairs? Looks like some nice blood spatter there about half way through ahah
No idea what your looking at. You need to go to Spec Savers
@@thespecialist786 bahahah. No idea what that is but I’m down.
@@thespecialist786 5:25-5:50 ish on the bottom portion
@@DropThatDelly That’s paint 🎨 that has come off. Thanks for noticing need to renovate the house again.😃
🤣🤣🤣 CSI in the hoooouse!
Bro where do I buy this. Can u help send me the website thank you
Ebay, is the source for these.
@@thespecialist786 bro Ebay is huge, please go to your order history and copy and paste the link
This question has been asked few time here but his answer is all items are from eBay. There are tonnes of items in each category. People are asking to save their time but seemed you want to keep a secret😊.
Good but why u speak so slow..? Make it at normal speed please
यह कितने की हे और यह कहा मिलेगी
Please write in English even if you are using Hindi words.
@@thespecialist786 there's a translate button you know
@@facefucker7923 There you go, English easy.
Meh.
Nothing about this installation that I liked.
🤣
Kill the music!
Thank you for the comments, music comes complementry