i love how you fixed those problems as an electric engineer. why waste money and time replacing a cable when you can do what you did. Absolute Rock Star.
Hello Sorin and everyone. Happy new year!!!! 🎉🎉🎉 These Clevo machines are amazing. I'm on my 3rd one (from Sager, since Clevo is a white label brand). The one before the current one was badly damaged by a technician a few years ago. That job is what got me into repairing electronics. I did the repair by drilling into the shorted part of the motherboard until I removed the short. That laptop is still working in my shop 🙂
I wouldn't say anything good about these laptops taking to the account the fact that they are sending power and the ground to the screen through the same wire like in a TV antenna wire, with only difference in the case of the laptop such a wire is extremely small. To say that is a bad design is nothing to say...
Welcome back Sorin. hope that you and your family had a very Happy Christmas and I wish you and your family a very Happy New Year. I missed your videos.
Always use calibrated fingers to insert connectors, or the pins will get mashed together as they did here. Good job on undoing the mess that was the result.
i think it will not last long, because all the load is on 3rd wire now. because 1 point in screen side connector is broken and there is no pad you can see at 9:14 and you cut the 2nd wire at 18:51 so all the load will be transferred to the 3rd wire, and there too many chances that it will be heated and melted as well. Correct me if i am wrong 😊
Happy new year my dearest teacher!! I hope 2025 is a great year for you with many pizzas and loooots of "we have picture, I can't believe!" Thanks for your work and teachings!
Only replace the ribbon cable will be my approach, but this is delivery and so on. The rest will be as your steps. Just to be shure in the ribbon. Thank you for your videos. Keep spreading your knowledge in 2025.
hello sir I am from Algeria, graduated of electronic embedded systems, and I am fond of electronics. I want to master electronic maintenance.... What do you recommend?
22:23 I would've chosen to mode the problematic earth cable to the other side, where the second cable is soldered on. Just so it doesn't cross the uninsulated power cables. If I were too lazy to do even that, I would've cut the crossing earth cable and fold it back. Then put tape around it. Lots of more reliable, lazy options.
These Clevo board never break - unless someone break them. I work in Avell, something like Mechrevo and XMG that you may know. At each hundred tongfang board issues, we did get one Clevo board with problem. Note that tongfang boards is under 5 percent RMA rate.
Happy new 2025 year to you and the family, you have a great show 👍been a long time Romanian watcher from 🇦🇺 keep the good work up and show people how electronics use to be fixed in Romania under the communists🤣
well so far good on Janurary 20th america will be not so good and no im no lefty however i drank a little to much on the 1st so ill watch this and probably go back to sleep
I dlatego bezpieczników sie nie drutuje. Tu nasz przykład co sie stanie jak uzyjesz pr,eeodu zamiast bezpiecznika. Zamieni się w kulkę i wypali dziure w płycie.
only sorin can tell you that a proper fuse is better than a wire then 2 seconds later puts a proper calibrated wire lol, happy new year!
@@techprotips5865 😅 this is Sorin 💙
Lol, that was a classic one!!
i love how you fixed those problems as an electric engineer. why waste money and time replacing a cable when you can do what you did. Absolute Rock Star.
good luck finding a cable for this crappy brand.....owned one 2 yers ago...even finding a battery is a challenge
Hello Sorin and everyone. Happy new year!!!! 🎉🎉🎉
These Clevo machines are amazing. I'm on my 3rd one (from Sager, since Clevo is a white label brand). The one before the current one was badly damaged by a technician a few years ago. That job is what got me into repairing electronics. I did the repair by drilling into the shorted part of the motherboard until I removed the short. That laptop is still working in my shop 🙂
I wouldn't say anything good about these laptops taking to the account the fact that they are sending power and the ground to the screen through the same wire like in a TV antenna wire, with only difference in the case of the laptop such a wire is extremely small. To say that is a bad design is nothing to say...
La multi ani! Un an nou fericit
Welcome back Sorin. hope that you and your family had a very Happy Christmas and I wish you and your family a very Happy New Year. I missed your videos.
Proper calibrated teacher thank you and happy new year sorin
Happy New Year Sorin and to your whole family! I was starting to get bored there !! 💗
Happy New Year Sorin, Ihope you had a great time.
Respect for Sorin...
Happy New Year to you and your family. I am happy to can see your videos again this new year.
Sorin, Have a Happy and Healthy New Year!
Happy New Year Sorin and Everyone followers this channel!
Nice explained Good job!
👍
Happy New Year Sorin!
happy new year sorin.
It's working!!! Happy new year Sorin, keep up the good work!
Happy new year Sorin to you and your family!
Only proper calibrated wires are used to complete the job, I like this 😂 have a bountiful year ahead!
Happy new year Sorin ! Greetings from Belgium 🎉
Happy New Year and best wishes to you and your family, with proper calibrated wires and lots of dead caps and pizza times!!!
Always use calibrated fingers to insert connectors, or the pins will get mashed together as they did here.
Good job on undoing the mess that was the result.
Happy New Calibrated Year to You, Sorin!!!!
Happy New Year!!! La Multi Ani!!! Thank you Sorin for all your video!!!
Welcome back Sorin. Thanks for sharing
Excellent video Sorin. Happy New Year.
Happy new yesr Sorin, thank you so much for this sharing videos on RUclips ..
we have picture and its working, i cant believe !! happy new year @everyone
Happy new year.. my fav teacher..
Happy New Year Master Sorin.
Happy New Year Master Sorin!
Yes, Better safe than sorry, Everyone happy, Not overcomplicated or expensive overkill, Nice work!
Happy new year Sorin!
Very good, ART OF IMPERFECTION !
Happy new year Sorin
i think it will not last long, because all the load is on 3rd wire now. because 1 point in screen side connector is broken and there is no pad you can see at 9:14 and you cut the 2nd wire at 18:51 so all the load will be transferred to the 3rd wire, and there too many chances that it will be heated and melted as well. Correct me if i am wrong 😊
he's giving a warranty, just wait if the laptop is coming back or not
Happy New Year!! Best wishes to you and your family
proper dodgy repair :D Happy new year
Me to Sorin its just another day i dont get excited with a new year good job as usal
happy new year to you and your family
Proper proper proper nice repair, what a start for the 2025!!!!👏🏻👏🏻👏🏻
Happy Nwe Year to you and your family
Happy new year my dearest teacher!! I hope 2025 is a great year for you with many pizzas and loooots of "we have picture, I can't believe!"
Thanks for your work and teachings!
Good Job. Happy new year.
nice. Happy New year to you
Only replace the ribbon cable will be my approach, but this is delivery and so on. The rest will be as your steps. Just to be shure in the ribbon. Thank you for your videos. Keep spreading your knowledge in 2025.
Happy new year sorinn❤❤❤❤🎉🎉🎉
Feliz año 2025 para todos, por otro lado se aprende mucho de este canal.
Happy new year
Bonne et heureuse année 🎉🎉🎉
Happy new year.
Thank you very much sir you're the best. May good bless and straighten you. Please for keep your good work
Good job mate 👏
hello sir
I am from Algeria, graduated of electronic embedded systems, and I am fond of electronics.
I want to master electronic maintenance.... What do you recommend?
Nice job bro❤
Happy new year!
happy new year...
Happy new year everyone 🎉❤
sorin thankGOD there is only 8 comments love ur contant Unconditinal LOVE FROM KARACHI PAKISTAN
22:23 I would've chosen to mode the problematic earth cable to the other side, where the second cable is soldered on. Just so it doesn't cross the uninsulated power cables.
If I were too lazy to do even that, I would've cut the crossing earth cable and fold it back. Then put tape around it.
Lots of more reliable, lazy options.
Nice jop and nice say its working we have a picture
Hi friend happy new year 🎉🎉🎉🎉🎉
Power button this laptop have 18 volts
8:40 what are you referring by this "i know" ?
Should be test in the cable screen not in the connecteur 😂😢
@youneslafri9120 ok understand :)
"how that happened?" my guess is, someone watched your videos and decided to also use a "proper calibrated wire", instead of the proper fuse.
That's why I call you Mcgyver. Great content. Thanks
Love it! Good stuff.
If I understand correctly, the plus and the ground to the screen are through the same cable (shielded) like in a TV antenna wire?
New year new calibrated wires ! 🎉
At the end of video, you charge the laptop with 21 V. Is it save?
These Clevo board never break - unless someone break them.
I work in Avell, something like Mechrevo and XMG that you may know. At each hundred tongfang board issues, we did get one Clevo board with problem. Note that tongfang boards is under 5 percent RMA rate.
"We have picture that's crazy!" 😂
1:33 - I've just noticed that cable at 10 o'clock - is that a bare wire?
Could it be due to a shock that move the connector and shorted those pins ?
looks to me the solder ball shorted the grounded heat sink to a power pad on the board and shorted causing all the damedge
Nice! 😎
perfect 💯💯👌
Happy new year 🎊 and more work to do 😂
2025 the year of easy Pizza 🙂 ( Hopefully )
It´s not dodgy, it´s proper calibrated for the case at hand.
sorin saying proper nice sexy fuse was not on my bucket list for 2025
Happy new 2025 year to you and the family, you have a great show 👍been a long time Romanian watcher from 🇦🇺 keep the good work up and show people how electronics use to be fixed in Romania under the communists🤣
Thankssssssss❤
Szczęśliwego nowego roku 2025 🎉
La mulți ani!
Proper SORIN style job.. ha ha haaaaa...😊
Happy NY
Fixed one with a proper calibrated wire
well so far good on Janurary 20th america will be not so good and no im no lefty however i drank a little to much on the 1st so ill watch this and probably go back to sleep
I dlatego bezpieczników sie nie drutuje. Tu nasz przykład co sie stanie jak uzyjesz pr,eeodu zamiast bezpiecznika. Zamieni się w kulkę i wypali dziure w płycie.
I know it's all about low costs, but a screen ribbon cable is not that expensive, maybe could be offered to the client.
I think Sorin needs to replace his power supply for a better one that can give at least 10 amps. Nice video anyways
Sorin!!!!!....bended...bent you mean😂😂.
🍕🍕🍕🍕🍕🍕 Happy new year s
More grey hair ? Happy 2025 Sorin !
Hello 🤝👍👍👍👍👏👏👏👏👋👋👋👋👋
I would guess the user replaced the screen without disconnecting the battery first, blew the fuse, soldered across it...
and didn't connect the cable at the screen side properly :D
For the same user to be knowledgeable enough to find and bridge the fuse, but being unable to push in a connector properly, that doesn't make sense.
2025 started with dodgy repair🎉
what i like about u? for every dodgy repair u have an explanation.hhh
Un an Nou Fericit!
HNY..
I want all your old tools.if you can send it to me,iam am a subscriber from Pacific island country,Papua New Guinea.
Happy New Year 2025
👍👍👍💻