I decided to make a video of 5 places that I have found scrap copper and this is what I came up with. Let me know what you think.. just trying out different types of videos.
All of the air conditioners we scrap are and must be emptied by the hvac tech before we purchase them and if we come across one that is still full of gas I have a hvac friend who recovers and recycles all the gasses! The ac you see in the video was emptied out of all gasses and then refilled with pressurized air from an air compressor so I could cut it open in this video to get more comments.. Should I make a video of how to re-pressurize a condenser unit with compressed air..?? hahahah
You obviously never passed the epa test. You definitely vented that gas that’s not compressed air. Not only illegal, immoral and terrible for the environment but a 40k fine. Not funny.
i haven't made it to the big time yet, commercial grade motors and transformers... still piddling with household stuff, but i've just started so... i like the way you went thru it all, (separated) and identified what was in the truck, lol, but at least where i'm at it doesn't snow...
haha I haven't made it to the big time yet either I wish I had but all we can do is one step at a time and keep working in the right direction. Slowly I'm starting to learn more and make more connections so it does get better slowly 👍 Must be nice! are you just trying to rub it in? its the middle of winter here right now and it sucks! lol
I just knew someone would bring that up. If you pay someone to remove the ac gases you would not be making any money. And besides laws were meant to break. Hell with them.
Good video. Its copper I'm mainly into, along with cable and brass. But I'm currently saving up for a truck and then I will be taking steele and anything metal, so good to know how to get more copper. 👍👍👍
awesome good to hear I used to walk around with my dog and just find metal then got a car then a truck. copper and non ferrous metals are nice of course but steel is a steady supply and helps to pay the bills
seen a few of your comments sorry I haven't been back on here in so long now I've been struggling with things. I'm back at it now and am going to be posting again!
@CYRUS DAWSON, my plan is this: fours days a week in the van. Three days on the bike and an occasional day off. I say day off, I'm sure I'm like most scrappers, we still tend to do a bit of cleaning up of scrap and generally still scrapping. This is my favourite occupation I've ever had. I scrapped as a kid, as a teenager and now as an adult. I plan to always be a scrapper. As long as my body allows me to. All the best buddy.
Right!!...so how do I get that transformer. I know there is a shit ton of copper in it. How do I find them? I think this vid may be for people trying to understand where copper is located. IDK! LOL
You can get a transformer at your nearby substation. But you wont enjoy the spoils because you will probably be dead. And your family will be without power for up to 30 minutes.
I also found a local electrical supply guy that buys and sells certain used equipment for much more than scrap. Cuttler Hammer (?) Breakers are in demand.
Local? local to where? I would like a connecting that buys electrical equipment lol I mainly sell stuff on eBay if I think there will be any sort of demand for it, sold some large breakers before
If you run a Sawzall down the sides of those coils and cut the copper to get more for it the coils are aluminum copper mix so you only get like half of the price so if you cut the copper off to get quite a bit more
What about plumbing copper? Granted new construction is more into PVC but I get most of my copper from bathroom and kitchen remodels (big role off dumpsters in the street)
Thank you so much for the information.. Where would you recommend for a person just starting out to find such treasures? I see the value in your information. If you had to start over, were would you start your treasures hunt at?
Hey thanks for watching! if someone is just starting out id start by searching the streets on garbage nights as well as dumpsters.. start trying to do some advertising in your local area offering free pick up. Start learning slowly and slowly building some connections with clients and scrap yards. Ask lots of questions at your local yard
Now, HERE'S a good question.. Do you keep it & melt it down or do you turn it in?? I'm melting mine down as I find it & turning them into 5lb bars of solid copper ingots, that of which I have 10 currently, with another 30-40lbs sitting in a tub waiting for spring to come back so I can start melting again.. (edit) I mean, you've already got the tools to extract it all, it's actually pretty fun to melt it all down & turn em into ingots, they look nicer too!!😁. During the lockdown I picked up a smelting furnace, some molds & a bunch of crucibles & haven't looked back!!
Nice I've always wanted to try melting some ingots my self as well but I never got around to it. most scrap yards don't actually like buying ingots unless you have a close contact with them because they don't know forsure what's in it..
what type of wire can you buy for that price? there is a lot of competition with buying copper around here so you'd be really lucky to have a source at that price
As I'm watching this video I am looking at the "next up" video which reads 'How to make 900 dollars an hour scrapping copper' and thinking "ok that is some bull."😂💤
Yeah not going to find that many or those type of things at the curb very often or ever lol Ive been doing this for a while so you slowly build some connections and I'm always searching and advertising in different ways offering to pick up scrap metals or offering to buy scrap. I've only been to a few auctions but I have a buddy who works with storage unit places so we get some connections through that as well
There’s shops and scrap yards and private mechanics doing these things in shops around the world and no one is watching or paying attention or cares, it’s only when someone posts a video that all your environmental experts want to put their two cents in. If they really cared, instead of making a comment that had zero impact and changes nothing. Actually get up off your ass and go to auto shops and air conditioning heating companies. Take a camera with you and document and do something to take action!! Don’t just anonymously point out obvious shit just to feel important like you actually care. At the end of the day you should worry more about the obvious things that are plain for everyone to see. Worry about the blatant pollution and destruction of the planet we all need to survive! Every day you start your vehicle and drive it back n forth to work your daily emissions are far worse than the occasional release of refrigerant into the atmosphere. The fact remains. The tougher it becomes to have a garage or so called professional mechanic fix your vehicle, the more people who learn to make their own repairs at home and will cut corners and save whatever money they can. Most ac units in any car that’s not regularly maintained and are at least a couple years old will leak out all the refrigerant eventually. One rubber gasket , gets worn or dry rot and it will leak. Whoever complained about this guy, I’ll bet at least one of them is currently driving a vehicle that is leaking refrigerant or oil or coolant and isn’t even aware or is and don’t care. Moral of the comment is there’s much bigger problems and concerns that you can actually do something about. Also never assume what you see in a video is the whole story. People usually edit and don’t tell every detail. Which was the case in this video and most that I’ve seen people jump to conclusions and make assumptions. Pretty sure most have heard the saying when you assume, you make an ass out of yourself or something like that!! Thanks for the guy who took the time to make the video so it could help others. I’m sure he appreciates the assumptions of how he does or doesn’t do things!
I have seen a couple of guys on RUclips that actually buy insulated wire and then strip it to maximize the profit. Not sure where they buy it but I suspect demolition companies may be willing to sell rather than do the work
I think he's asking how much a kg of copper is worth , since a kg is 2.2 pounds and copper clean or #2 for most other people is (at my yard 3.73/lb right now that would make a kg of copper 8.21/kg) however if it's bright wire (4.10 at my yard rn) then it's 9.02/kg
@@joehertel8846 thanks for clarifying it for him and me lol. Right now #2 copper is at $4.40-$4.50 right now in my area! Crazy high prices! Near Toronto Canada
Thats the big question.. the real struggle is finding new connections and ways to advertise. like most types of business new / unique forms of marketing is what's going to make the most impact
If you see any construction sites or where an old building is being remodeled you can stop by and ask. If you know anyone that works in restaurants have them keep an eye out bc restaurants are always getting new equipment. If your area has a spring cleaning time where they pick up large items for the dump be prepared and especially drive through the more affluent areas as the wealthy tend to throw out good things. Look for old illegal dump sites.
Hi new sub in the uk, nice vid something about all that copper really excites me lol. Will you be doing any more content? I notice it’s been a year since your last upload.
Hey thanks for subscribing! copper always excites me too lol Yes I I'm going to start posting again now, I was just going through some rough times and lost all my motivation to be posting.. I was still filming some things just never got around to posting. Feeling better now and ready to get back to posting regularly 👍
@@scrap2cash712 glad you will be doing more, I went through a phase last year for a couple of months where I lost all my motivation. Then towards the end of the year started posted again, and I’m glad I had that little break.
@@ScrapRushUK glad you are doing better and back to posting as well. sometimes we need a break and sometimes it helps feeling like starting fresh again
If you let that refrigeration gas out into the open air here in Australia, you would cope a Hugh fine and if the Authorities found out that you are a serial offender, you would most likely have stint behind bars. And rightfully so
I had the scrappers fuckin wet dream of an opportunity so a guy from green bay calls me and says he owns so and so business and he needs a guy with a truck to come out to his job address (taking 2 old parking lot light fixtures down and putting in led) the job had 380 or so light pole fixtures and there is 2 on every pole imagine the door of a dishwasher all the way around same size all cast aluminum wired with nice thick 10g house wire and a beefy transformer containing from 3-5lbs of copper on every one. Now remember almost 400 of them! The cast alone I made a killing
I understand scrapping but you never let a/c fluid out into the air if you gonna do this kind of money making deal do it right ....... 1 fine from epa youll quit
Always searching for more 5 star scrap yards lol. I get pretty good prices because I have been dealing with the same people for a while and I sell stuff in larger quantities. Also being centrally located there's lots of competition in my area
I bought the trailer for cheap off of Kijiji.. just got lucky and found a good deal after searching for a long time and then added the winch on my self. bought the winch on clearance at princess auto for cheap too!
I got a lot of the motors from one connection I had for a while I no longer get them from him though. just advertising in different ways trying to find more connections
No a transformer isn't a battery, a battery stores power and a transformer transforms the power into different voltages.. I do not know very much about either of them my self either. except how to recycle them 👍
You didn't really explain where you're getting all of these copper items. Most are not easy to find and even far more rare to acquire without paying for them.
I'm in the US-Minnesota and nobody here will buy burnt copper.. and if you try to sell to scrap yard that isnt fond of you or your attitude they will report to authorities your license and information to be on file for theft and burglary type crimes. So we NEVER burn here.. love video but too big for me.lol
My yard won't buy wire if it's burned unless you have papers showing you were hired to cleanup after a housefire and on the rare occasion they do buy it they will only give the person the lowest copper price they have at the time like insulated copper wire low grade price .
@@joehertel8846 Yeah as I understand it here in Ontario yards are not supposed to be allowed to buy burnt wire anymore but there are still places around that will buy it.. Enabling and almost encouraging people to burn it and hurt the environment lol
lmao want me to deliver cash right to your door for you? you need to do the work your self.. no one is going to tell you exactly how to do it and hold your hand so you can make some money. if you want it too get out there and start trying to get it!
@@kadehebert4054 lol I'm sure people do steal stuff because its valuable but I do not steal anything. most of the time if it is a valuable thing I am recycling I my self had to pay someone or a business for it. I offer to pick up and pay depending on what it is and where they are located
lol you are on a negative commenting spree? Of course I don't leave that crap on the copper before I sell it.. if I did I wouldn't be able to sell it for top dollar if it was too hard to separate maybe id sell it as dirty copper.. that seem shady? lol
![KSI - Thick Of It (feat. Trippie Redd) [Official Music Video]](http://i.ytimg.com/vi/At8v_Yc044Y/mqdefault.jpg)
All of the air conditioners we scrap are and must be emptied by the hvac tech before we purchase them and if we come across one that is still full of gas I have a hvac friend who recovers and recycles all the gasses!
The ac you see in the video was emptied out of all gasses and then refilled with pressurized air from an air compressor so I could cut it open in this video to get more comments.. Should I make a video of how to re-pressurize a condenser unit with compressed air..?? hahahah
For sure. I also take the copper form my hvac installs.
Air does not comes out looking like white gases.
Sure,, right right. Whatever you say.
Lol
Phish!!!!
2:13
You obviously never passed the epa test. You definitely vented that gas that’s not compressed air. Not only illegal, immoral and terrible for the environment but a 40k fine. Not funny.
i haven't made it to the big time yet, commercial grade motors and transformers... still piddling with household stuff, but i've just started so... i like the way you went thru it all, (separated) and identified what was in the truck, lol, but at least where i'm at it doesn't snow...
haha I haven't made it to the big time yet either I wish I had but all we can do is one step at a time and keep working in the right direction. Slowly I'm starting to learn more and make more connections so it does get better slowly 👍
Must be nice! are you just trying to rub it in? its the middle of winter here right now and it sucks! lol
If the EPA ever seen you put all that air conditioner freon in the air like that they would be upset.
lmao
try reading the top comment
Fines...
I call bs on the top comment and any authorities worried enough to do anything have bigger issues.
I just knew someone would bring that up. If you pay someone to remove the ac gases you would not be making any money.
And besides laws were meant to break. Hell with them.
Good video. Its copper I'm mainly into, along with cable and brass. But I'm currently saving up for a truck and then I will be taking steele and anything metal, so good to know how to get more copper. 👍👍👍
awesome good to hear I used to walk around with my dog and just find metal then got a car then a truck. copper and non ferrous metals are nice of course but steel is a steady supply and helps to pay the bills
seen a few of your comments sorry I haven't been back on here in so long now I've been struggling with things. I'm back at it now and am going to be posting again!
@@scrap2cash712 looking forward to it buddy.
@CYRUS DAWSON, my plan is this: fours days a week in the van. Three days on the bike and an occasional day off. I say day off, I'm sure I'm like most scrappers, we still tend to do a bit of cleaning up of scrap and generally still scrapping. This is my favourite occupation I've ever had. I scrapped as a kid, as a teenager and now as an adult. I plan to always be a scrapper. As long as my body allows me to. All the best buddy.
@CYRUS DAWSON, good on you.
Love the background music 2👍
All good sources for copper 👍
David Carlisle Thanks for watching it!
Hey man. I love your video. Its so satisfying to watch. Im collecting copper too.
You said places but showed us 5 things great for copper... It be nice to know where to get these things
Right!!...so how do I get that transformer. I know there is a shit ton of copper in it. How do I find them? I think this vid may be for people trying to understand where copper is located. IDK! LOL
You can get a transformer at your nearby substation. But you wont enjoy the spoils because you will probably be dead. And your family will be without power for up to 30 minutes.
@@Chewy_GarageBandDad look for buildings that are being demolished or remodeling is taking place.
@@FireSkittlez85 right ooon. Preesh
Love the Adiktheone music! TNTL about copper, yeeeaaahhh!!!
As an electrician I get a fair bit of cable. I also process it through a stripping machine that increases the value.
Sounds good Luton. Are you selling your copper right away or are you sitting on it waiting for the price to go up ?
@@jussitikkuri6991 I will be holding it December and January. Prices ALWAYS go down
I also found a local electrical supply guy that buys and sells certain used equipment for much more than scrap. Cuttler Hammer (?) Breakers are in demand.
Local? local to where? I would like a connecting that buys electrical equipment lol
I mainly sell stuff on eBay if I think there will be any sort of demand for it, sold some large breakers before
You should strip your wire you get more money for it
some wire I do strip I just don't think its worth the time it takes for most types of wire
If you run a Sawzall down the sides of those coils and cut the copper to get more for it the coils are aluminum copper mix so you only get like half of the price so if you cut the copper off to get quite a bit more
It's totally illegal to vent air conditioner systems into the atmosphere. Big fines from the EPA.
i was thinking the same thing lol
I dont anyone cares
Yeah that was nuts.
Some places won’t take air conditioner parts unless you’re a licensed technician
What about plumbing copper? Granted new construction is more into PVC but I get most of my copper from bathroom and kitchen remodels (big role off dumpsters in the street)
Tom TTFNCachn very good point lol I get some that way as well just didn’t think about it even had copper tubing in the video I didn’t mention lol
Good for nightime dumping of an old sofa!!!😂😂😂
@@leechjim8023 So that was you. 👹
Places you FIND copper. Those were buildings u were cutting those out of. This helped so much where to FIND copper. Lol
New subscriber..great video buddy.going to be busy watching your videos now.👍👍👍
Thank you!
Oh man it's a thing of beauty. No one processes scrap around here I want to do it so bad I just need start up money. I will get it though
nice you can start small without very much start up costs.. where are you located? there's scrap being processed every where!
Find a scrapyard your family has been to, fill car/truck with metal and find out what shit is worth
Wish I knew WHERE you found these. It could be used to make stuff.
Found which items.? and what could they be used to make??
@@scrap2cash712 I guess any motors and fridges. I don't remember now. But I would also have to know how to weld or solder.
Thank you so much for the information.. Where would you recommend for a person just starting out to find such treasures? I see the value in your information. If you had to start over, were would you start your treasures hunt at?
Hey thanks for watching! if someone is just starting out id start by searching the streets on garbage nights as well as dumpsters.. start trying to do some advertising in your local area offering free pick up. Start learning slowly and slowly building some connections with clients and scrap yards. Ask lots of questions at your local yard
Strip all that wire for the win!!!
would have been so much copper! lol but also too much work
Great video
Glad you enjoyed it
Heavy duty copper out there
Next time please lower the music and increase the speak
Videos nice
Now, HERE'S a good question.. Do you keep it & melt it down or do you turn it in?? I'm melting mine down as I find it & turning them into 5lb bars of solid copper ingots, that of which I have 10 currently, with another 30-40lbs sitting in a tub waiting for spring to come back so I can start melting again.. (edit) I mean, you've already got the tools to extract it all, it's actually pretty fun to melt it all down & turn em into ingots, they look nicer too!!😁. During the lockdown I picked up a smelting furnace, some molds & a bunch of crucibles & haven't looked back!!
Nice I've always wanted to try melting some ingots my self as well but I never got around to it. most scrap yards don't actually like buying ingots unless you have a close contact with them because they don't know forsure what's in it..
@@scrap2cash712 well, there are machines that can tell them the composition of the bars, they've just gotta invest in them..
@@gingervikingjesus2351 Yeah bro, they are not buying a 20k machine to scan 10 bucks worth of copper bars per year,lol
@@yaykruser lol try 110lbs of copper..
@@yaykruser The goal is 300lbs..
Dude started the hole in the ozone layer 😂
I dont know where to get any stuff like that sadly i love to get my hands on that
Buy insulated copper wire from the scrap yard for $0.81 take the rubber off and scrap the copper for $2.70
what type of wire can you buy for that price? there is a lot of competition with buying copper around here so you'd be really lucky to have a source at that price
As I'm watching this video I am looking at the "next up" video which reads 'How to make 900 dollars an hour scrapping copper' and thinking "ok that is some bull."😂💤
About a $10,000 fine for that condenser stunt. Smart move.
Read the top comment.
Have to catch me first though!!😂😂😂
You left out old analog TV sets. You can find these relics at yard sales and abandoned hotels/motels/houses.
yeah good call old crt tvs have a decent chunk of copper in them!
It sucks not having any land or i would be scrapping like a maniac
Do you get your stuff in auctions? Those commercial ac units and that many electric motors are not usually on the curb or a dumpster
Yeah not going to find that many or those type of things at the curb very often or ever lol
Ive been doing this for a while so you slowly build some connections and I'm always searching and advertising in different ways offering to pick up scrap metals or offering to buy scrap.
I've only been to a few auctions but I have a buddy who works with storage unit places so we get some connections through that as well
There’s shops and scrap yards and private mechanics doing these things in shops around the world and no one is watching or paying attention or cares, it’s only when someone posts a video that all your environmental experts want to put their two cents in. If they really cared, instead of making a comment that had zero impact and changes nothing. Actually get up off your ass and go to auto shops and air conditioning heating companies. Take a camera with you and document and do something to take action!! Don’t just anonymously point out obvious shit just to feel important like you actually care. At the end of the day you should worry more about the obvious things that are plain for everyone to see. Worry about the blatant pollution and destruction of the planet we all need to survive! Every day you start your vehicle and drive it back n forth to work your daily emissions are far worse than the occasional release of refrigerant into the atmosphere. The fact remains. The tougher it becomes to have a garage or so called professional mechanic fix your vehicle, the more people who learn to make their own repairs at home and will cut corners and save whatever money they can. Most ac units in any car that’s not regularly maintained and are at least a couple years old will leak out all the refrigerant eventually. One rubber gasket , gets worn or dry rot and it will leak. Whoever complained about this guy, I’ll bet at least one of them is currently driving a vehicle that is leaking refrigerant or oil or coolant and isn’t even aware or is and don’t care. Moral of the comment is there’s much bigger problems and concerns that you can actually do something about. Also never assume what you see in a video is the whole story. People usually edit and don’t tell every detail. Which was the case in this video and most that I’ve seen people jump to conclusions and make assumptions. Pretty sure most have heard the saying when you assume, you make an ass out of yourself or something like that!! Thanks for the guy who took the time to make the video so it could help others. I’m sure he appreciates the assumptions of how he does or doesn’t do things!
Where did you get all those mate?
2:55 that’s a chilling unit I took one of them apart that was much larger got almost a grand
Bs
@@ronisaarinen8526 how is that bs buddy could care less if you believe it or not
@@joshuamorris9050 hah $1000 for only copper or the whole thing?
@@ronisaarinen8526 whole copper motors brass ect
@@joshuamorris9050 ah ok 👍🏻 how much does those things average weight?
Says the Freon has been recovered before hand but you see it all blowing off into the air😂😂😂
we need to move towards a circular economy, no longer demolish but reuse.
strip the #1 copper. you will get clean price for it.
id like to know how to get all those copper wires on a regular basis
Id like to know as well lol I do not get copper wire on a consistent basis.. other then lower grade wire from taking furnaces, acs etc apart
I have seen a couple of guys on RUclips that actually buy insulated wire and then strip it to maximize the profit. Not sure where they buy it but I suspect demolition companies may be willing to sell rather than do the work
Good Job-may i ask how many 1kg scrap copper-Tks
What do you mean how many 1kg of copper..??
@@scrap2cash712 when your sale
@@guitarbbb123 sorry I am not sure what you are talking about
I think he's asking how much a kg of copper is worth , since a kg is 2.2 pounds and copper clean or #2 for most other people is (at my yard 3.73/lb right now that would make a kg of copper 8.21/kg) however if it's bright wire (4.10 at my yard rn) then it's 9.02/kg
@@joehertel8846 thanks for clarifying it for him and me lol.
Right now #2 copper is at $4.40-$4.50 right now in my area! Crazy high prices!
Near Toronto Canada
Only problem is most transformers I've come across has copper plated aluminium windings so not really worth stripping?
I call BS, that WAS refrigerant, in the condenser. I'm an HVAC Tech/Instructor. I know the difference between compressed air and refrigerant.
What I want to know is how you get the ok to collect all that scrap? Like how did you go about finding these places?
Thats the big question.. the real struggle is finding new connections and ways to advertise. like most types of business new / unique forms of marketing is what's going to make the most impact
If you see any construction sites or where an old building is being remodeled you can stop by and ask. If you know anyone that works in restaurants have them keep an eye out bc restaurants are always getting new equipment. If your area has a spring cleaning time where they pick up large items for the dump be prepared and especially drive through the more affluent areas as the wealthy tend to throw out good things. Look for old illegal dump sites.
@@brianallison1913 Good call lots of places to find stuff and meet some connections
impressive contract you get
Once in a while I get lucky lol. you know how it is
Hi new sub in the uk, nice vid something about all that copper really excites me lol. Will you be doing any more content? I notice it’s been a year since your last upload.
Hey thanks for subscribing! copper always excites me too lol
Yes I I'm going to start posting again now, I was just going through some rough times and lost all my motivation to be posting.. I was still filming some things just never got around to posting. Feeling better now and ready to get back to posting regularly 👍
@@scrap2cash712 glad you will be doing more, I went through a phase last year for a couple of months where I lost all my motivation.
Then towards the end of the year started posted again, and I’m glad I had that little break.
@@ScrapRushUK glad you are doing better and back to posting as well. sometimes we need a break and sometimes it helps feeling like starting fresh again
@@scrap2cash712 exactly my brother, keep at and keep up the hard work.
@@ScrapRushUK thanks
Don't think that is compressed air coming from that outdoor unit. Hmm... EPA? Will I get a payday... Interesting
If you let that refrigeration gas out into the open air here in Australia, you would cope a Hugh fine and if the Authorities found out that you are a serial offender, you would most likely have stint behind bars. And rightfully so
You need to take the wire out of the bx then you’ll get more
sometimes I will if I don't have other things on the go at the time. I don't think its worth it most the time for the amount of time it takes
I had the scrappers fuckin wet dream of an opportunity so a guy from green bay calls me and says he owns so and so business and he needs a guy with a truck to come out to his job address (taking 2 old parking lot light fixtures down and putting in led) the job had 380 or so light pole fixtures and there is 2 on every pole imagine the door of a dishwasher all the way around same size all cast aluminum wired with nice thick 10g house wire and a beefy transformer containing from 3-5lbs of copper on every one. Now remember almost 400 of them! The cast alone I made a killing
Great video, new to channel.
I understand scrapping but you never let a/c fluid out into the air if you gonna do this kind of money making deal do it right ....... 1 fine from epa youll quit
Take it to a 5 star scrap yard for maximum price,also get yourself a band saw that cuts metal pipe and beams to gut open compressors
Always searching for more 5 star scrap yards lol. I get pretty good prices because I have been dealing with the same people for a while and I sell stuff in larger quantities. Also being centrally located there's lots of competition in my area
How much u payed for that trailer with the hydrolic cable
I bought the trailer for cheap off of Kijiji.. just got lucky and found a good deal after searching for a long time and then added the winch on my self. bought the winch on clearance at princess auto for cheap too!
curious if anyone checks to see if any of the transformers are still good?
Scrappers don't care. they will destroy $10,000 worth of equipment for $5.00 worth of scrap.
Where do u find ur motors
I got a lot of the motors from one connection I had for a while I no longer get them from him though. just advertising in different ways trying to find more connections
are transformers batteries?
No a transformer isn't a battery, a battery stores power and a transformer transforms the power into different voltages.. I do not know very much about either of them my self either. except how to recycle them 👍
Omg you let all that freon go into the atmosphere?? Wtf
Hey that compressor is on fire ?
Where's the 5 places?
Meatheads drooling
I'm pretty sure 90% of the dark red wire is aluminum
Aluminum has more vule then Metal rn
aluminum is metal
You didn't really explain where you're getting all of these copper items. Most are not easy to find and even far more rare to acquire without paying for them.
why not pay for it then?
Location pls
The transformers are Ali👍🏼
Some transformers are aluminum.. the ones I showed in this video were all copper. I have other videos where I pulled all the copper off them
If u burned all that u would make nearly double 🤣👍
Not supposed to be burning wire.. lol bad for the environment they say
I don't have a place where I could burn it though even if I wanted too
I'm in the US-Minnesota and nobody here will buy burnt copper.. and if you try to sell to scrap yard that isnt fond of you or your attitude they will report to authorities your license and information to be on file for theft and burglary type crimes. So we NEVER burn here.. love video but too big for me.lol
My yard won't buy wire if it's burned unless you have papers showing you were hired to cleanup after a housefire and on the rare occasion they do buy it they will only give the person the lowest copper price they have at the time like insulated copper wire low grade price .
@@joehertel8846 Yeah as I understand it here in Ontario yards are not supposed to be allowed to buy burnt wire anymore but there are still places around that will buy it..
Enabling and almost encouraging people to burn it and hurt the environment lol
2:10 😵
he never said where he got any of it. he was just bragging showboating the whole time.
lmao want me to deliver cash right to your door for you?
you need to do the work your self.. no one is going to tell you exactly how to do it and hold your hand so you can make some money.
if you want it too get out there and start trying to get it!
Bruh, the Air conditioner thing is super bad for the ozone layer...
And?
copper scores 💰
Bill Junking_fool everyone loves copper! Lol
Man where do you get all this stuff. Do you recycle for NASA 😂
lmao just consistency always looking for more and new connections..
its a never ending battle always searching for more
@@scrap2cash712 I get that. I get most of the old appliances and junk metal from my cousins and other family.
Fuck I'm small scaling shit. Damn damn
My Toyota is scared for it's life.
it should be! the catalytic converters are probably worth more then the car lmao
I want to purchas COPPER scrap pls contact kare
sorry I do not have copper on any where near large enough quantities for exporting
Dislike for loud music and not hearing anything else
And 2nd thing... your camera shakes like you are on drug crisis
So many whiny wankers, don't watch it if making your menstrual cycle start earlier than usual
Yal stole that?
What are you talking about? stole this video? lol
Lol no the bundle for that exchanger haha jk …. That happened before here in Louisiana
@@kadehebert4054 lol I'm sure people do steal stuff because its valuable but I do not steal anything. most of the time if it is a valuable thing I am recycling I my self had to pay someone or a business for it. I offer to pick up and pay depending on what it is and where they are located
Very nice
BAD RECYCLE!!!!
You cant leave insulated wire and other plastic and crap from motors on the copper, just a bad way to show shady work
lol you are on a negative commenting spree? Of course I don't leave that crap on the copper before I sell it.. if I did I wouldn't be able to sell it for top dollar if it was too hard to separate maybe id sell it as dirty copper.. that seem shady? lol
That stuff gets released all over every day. I just cut the pipe as well. Big deal!