Best tutorial on RUclips so far. Thx buddy. One more question, can I do this settings offline without any connection to the car? I would prefer to upload it later after the coding is done ?
I have to say that it has long been the first video I have seen in such detail and intelligible. Do you only allow the ignition to run on the entire encodings or do you let the engine run? I ask because I am always afraid that the battery no longer has enough energy and that I can destroy a control unit. Anyway, I hope you make some coding videos about the BMW F10 with Esys.
i have a question is Esys free to use ? or we should buy the licence and also is there any free document for knowing which modules should we update for specific feture we want to update
You can either request the dealer to do it when you take it for service (that’s what I did) or look up on youtube for a tutorial using e-sys on how to flash the firmware. Side note, apparently///M cars do not support full screen
Hi! Nice initiative teaching how to code via E-SYS! I have a Way 2020-1 M1941D1R HeadUnit on a F48 BMW X1 and I've been told that I need to update my iDrive to 6 (which I think I have because it is the same the video and have touchscreen) to be able to active the fullscreen CarPlay. Can you help me with that? Thank you so much!
Try changing the value I put in the description for full screen CarPlay and see if it works. If it doesn’t then you will have to look up a guide on how to flash a newer version of the idrive software on your vehicle
Hello Professor . Bmw You can teach these a few things Installation Speed limit Automatic round lights Appel car play Activation Bmw idrivesoftware update2021
I coded SAT 2TB to my BMW F31 and everything is fine. However, do you know what must be coded to appear in the instrument cluster S1, S2... instead of DS? Thank you.
@@cs.studios I can do that but to be honest I didn’t find anywhere how to buy one or where is the option to activate it and to put the code.. is like a top secret feature 😂
Thanks man. I have an m sport 35d. So a lot of the features are unlocked already. But I really like the camera operation. That’s awesome. Do you know any coding about hitches by chance
i have a question is Esys free to use ? or we should buy the licence and also is there any free document for knowing which modules should we update for specific feture we want to update
thank you for this tutorial bro very clear and precise excellent!
Best tutorial on RUclips so far. Thx buddy. One more question, can I do this settings offline without any connection to the car? I would prefer to upload it later after the coding is done ?
Yes you just need to read the data first and save the file. Then you can edit anytime
Thank you for the information bro..
I have to say that it has long been the first video I have seen in such detail and intelligible. Do you only allow the ignition to run on the entire encodings or do you let the engine run? I ask because I am always afraid that the battery no longer has enough energy and that I can destroy a control unit. Anyway, I hope you make some coding videos about the BMW F10 with Esys.
Hello how to activate apple carplay and android auto?
thanks bro for good tutorial
i have a question is Esys free to use ? or we should buy the licence and also is there any free document for knowing which modules should we update for specific feture we want to update
Thank you!
THANK YOU 😀👍👍👍
can you show how to code the anti dazzle feature?
Realy nice and easy !
Can you do a video on how to retrofit or change NBT to NBT EVO HU and Change VIN Number
There should be a RUclips video on that process. Unfortunately I just ended up buying an Android screen
I have a 2015 f12 m6 will it mess up anything updating the idrive to the latest?
If you mean flashing the idrive version then as long as you don’t brick it, should be fine
hey buddy, how do you update the firmware? i am trying to get fullscreen but my firmware does not support full screen. thank you !
You can either request the dealer to do it when you take it for service (that’s what I did) or look up on youtube for a tutorial using e-sys on how to flash the firmware. Side note, apparently///M cars do not support full screen
@@cs.studios do you have a tutorial on how to code apple carplay?
It’s the same process as in the video. Just check the description for which thing to change for carplay.
I have a 640i gran coupe 2015. I believe it has NBT ID4. So the older version. Should I follow the same steps ?
I believe that one should have the same folders as mine. Maybe not NBT2 but NBT. It was CIC that was different.
Any success on updating bro I also have 2015 f06
Hello!
how can I replace the picture in "My Vechile" with my own car? BMW G31
Honestly I’m not sure. Might be available on some forum. Yours isn’t correct ?
Hello
can i use that enet cable for mercedes, vw group and other brands?
I personally have not tested them on other brand vehicles. You could try
Hi! Nice initiative teaching how to code via E-SYS! I have a Way 2020-1 M1941D1R HeadUnit on a F48 BMW X1 and I've been told that I need to update my iDrive to 6 (which I think I have because it is the same the video and have touchscreen) to be able to active the fullscreen CarPlay. Can you help me with that? Thank you so much!
Full screen CarPlay requires newer idrive software. Check the description for CarPlay part that needs to be set and see if it works
@@cs.studiosI already have de enet cable, e-sys and psdz. Just want to upgrade to get the fullscreen properly working
Try changing the value I put in the description for full screen CarPlay and see if it works. If it doesn’t then you will have to look up a guide on how to flash a newer version of the idrive software on your vehicle
The display stretches, I need upgrade the iDrive. Can you help?
Hello
Professor . Bmw
You can teach these a few things
Installation Speed limit
Automatic round lights
Appel car play Activation
Bmw idrivesoftware update2021
would this also work on a non NBT ID4?
I think so, since they’re from same generation.
I coded SAT 2TB to my BMW F31 and everything is fine. However, do you know what must be coded to appear in the instrument cluster S1, S2... instead of DS? Thank you.
DS is when you put it in sport transmission mode but S1, S2 etc is when it’s in step tonic mode and you manually shift
Do i need icom and battery charger for id4 to id6?
I think id4 to 5/6 requires new idrive unit? Maybe if you have a later one then you might be able to flash with icom
You are the best. Can you give me the link for e-sys software and tell me how to change the size of the screen. Thanks
E sys can be found by following the instructions in the description. It’s available on a forum
Any video tutorial how to activate things like carplay or mirrors and stuff for the G30 ? Or is kind of the same with the F version ?
Should be the same way. The actually values to find might be very slightly different. I would check out some forums to be sure
@@cs.studios idk why but CarPlay as I understood is not possible with esys but maybe you know better 💪🏻
For carplay you will most likely need to pay for a FSC code
@@cs.studios I can do that but to be honest I didn’t find anywhere how to buy one or where is the option to activate it and to put the code.. is like a top secret feature 😂
Most places should give you a file that you put on a usb and it should pop up on the idrive system
Nice vid 🔥
Hi, is there a way to code the parking brake to engage after shutting down the engine?
I haven’t found any code to mod for that, may need to look around the f10 forums maybe someone else has done it
Will this work for an '15 650i gran coupe?
Yes, it should work on any F chassis BMW regardless of series
Hi! my f20 idrive got broken. So can you help on how I can change my instrument cluster language from Japanese to English using Esys. thanks!
Did it break from esys? If so if you have the original file backed up you can restore it.
@@cs.studios hi! the CIC is gone. it just keep on frozen BMW logo.
Where did you find the codes bro
Online forums
@@cs.studios can you gibe a link to these ones
Hey bro, which soft And hardware you use?
E-sys software. The cable I use is in description
@@cs.studios where i should buy that program please?
So I have the M6 Coupe (F13). Do the same steps apply? & Is there a new ID update? iDrive 8?
Same steps. We don’t get the latest idrive, it requires all new hardware
@@cs.studios can you install it for me? The new hardware in my 2014 F13
will this work on f15 model? thanks great video by the way
Yup any F series BMW. This tutorial focuses on newer models with NBT Evo since most tutorials were for CIC.
Thanks man. I have an m sport 35d. So a lot of the features are unlocked already. But I really like the camera operation. That’s awesome. Do you know any coding about hitches by chance
Can I do this with a 2013 650i
Yes some of the names might be different. Like mine says nbt yours will probably be cic
@@cs.studios OK so I can upgrade my idrive system to something newer like 6?
It’s pricey but you can go up to the one i got. Nbt evo
Great video, thank you. Does ID6 Light allow Apple CarPlay to go full screen?
ID6 lite doesn’t add full screen carplay. You need to update the head unit software itself to version X or newer
can not find the free E-Sys software?
Check description for links to where it can be found
Hello : your email
Click my channel then click about then show email
i have a question is Esys free to use ? or we should buy the licence and also is there any free document for knowing which modules should we update for specific feture we want to update
You can find some people made an excel file online with what modules can be programmed