Hey bud Thanks for the video you posted about the Alesis Strike Pro SE cases. I just bought my set and bought all the cases as you suggested except the hardware bag. Also I went with a bigger kick drum bag that allowed me to take the foam insert that came inside the Alesis kick drum shipping box and transfer it into the soft case creating a kinda hard case inside. Again your video was a HUGE help.
I posted here because your comments were disabled on that video. I would suggest turning on comments if possible now on that video because people love the Info!
Yo compre un compresor de estos de 1 galón para inflar una llanta para mi RV rin 16 y no funciono, asi que lo cambie por uno de 2 galones que tampoco alcanza a llenar la llanta, definitivamente creo que lo volvere a cambiar por el de 5 galones, pero dejame decirte que el de 1 galón y 2 galones no hace casi nada de ruido, pero son para trabajos pequeños y/o de baja intensidad. Si recomiendo estas herramientas. Debes verificar primero cual es la fuerza y poder que requieres para comprar el que nesecitas! Saludos a todos los que leyeron!
Looks pretty much identical to the DeWalt Job Max. For about half the price. Decent. I used to have the Porter cable Job Boss. But got burned in a fire. I loved it. But they're hard to find any more. I'm sure u'll like the 5 gal. But you'll have to buy a splitter if you're gonna run 4 hoses off it.
If you are thinking about buying this compressor, I VERY HIGHLY recommend that you DO NOT have it shipped and pick it up in the store!!! Mine arrived with: * a 9" hole punched in the side * the end seam staples torn out and the end flapping in the wind * NO owners manual * NO packing material to support it in transit * scratches on the metal, from what looks like sliding along a concrete floor When I called harbor freight, within hours of receiving the compressor, and after an hour on the phone, they said the I could ship it back, and AFTER THEY RECEIVED AND INSPECTED IT they would decide IF they would replace it!!! I showed the damaged box with the compressor sliding freely around inside the compromised box, and asked him if he would accept and pick up this box, that I had taped up for shipping. He said NO!
Square cubic feet per minute? Nope, that would be feet^6 per minute. SCFM is Standard Cubic Feet per Minute which is CFM based on standard temperature and pressure.
Do you see any reason that this can't be run vertically? Manual says not but it also shows a different compressor that I believe couldn't run vertically. I'm not sure on this one unless it's the location of the outputs that would prevent it for some reason?
Hi Erik. I had a question about your Strike kit, but comments are turned off. I'm going through the same issue, not wanting to transport the rack, and I was wondering if you would be willing to do a video showing exactly how you ended up mounting your toms. Cheers!
Did u break it in?? Or just turn it on in the manual it says open main drain valve and let run for 15 min with tool line valve closed jw maybe why it took so long to fill blow the ring out smh js
I was in search of a video on this compressor five days ago and found nothing. Now I search today and viola! Irritating. Thanks. Also, the instructions say not to use an extension cord.
it depends on how much paint you want to spray. I've got the same compressor. I shoot paint with an LVLP gun off a line that goes into an air dryer plumbed into the end of the manifold. Only one quick connect in that setup and the hose is relatively short. I get around five minutes of spray time before the compressor kicks in. For occasional jobs, it'll be fine.
Asking this myself. Manual says not but it shows a different compressor also. It's oil free so hoping, but perhaps the angle the outputs are it may not. But I've asked now also
Hi Eric, I have the identical compressor and have a little different problem than yours but with all your time spent on the phone maybe you know the answer. Mine will stop at the 225 psi but when I start using it the set pressure drops and it won’t maintain even 40psi. I was trying to spray paint and it wouldn’t hold any kind of pressure. I’ve used it in the past and it worked. Any ideas. Your other video had comments turned off.
If you are thinking about buying this compressor, I VERY HIGHLY recommend that you DO NOT have it shipped and pick it up in the store!!! Mine arrived with: * a 9" hole punched in the side * the end seam staples torn out and the end flapping in the wind * NO owners manual * NO packing material to support it in transit * scratches on the metal, from what looks like sliding along a concrete floor When I called harbor freight, within hours of receiving the compressor, and after an hour on the phone, they said the I could ship it back, and AFTER THEY RECEIVED AND INSPECTED IT they would decide IF they would replace it!!! I showed the damaged box with the compressor sliding freely around inside the compromised box to a FedEx driver, and asked him if he would accept and pick up this box, that I had taped up for shipping. He said NO!
Hey bud Thanks for the video you posted about the Alesis Strike Pro SE cases. I just bought my set and bought all the cases as you suggested except the hardware bag. Also I went with a bigger kick drum bag that allowed me to take the foam insert that came inside the Alesis kick drum shipping box and transfer it into the soft case creating a kinda hard case inside. Again your video was a HUGE help.
I posted here because your comments were disabled on that video. I would suggest turning on comments if possible now on that video because people love the Info!
Yo compre un compresor de estos de 1 galón para inflar una llanta para mi RV rin 16 y no funciono, asi que lo cambie por uno de 2 galones que tampoco alcanza a llenar la llanta, definitivamente creo que lo volvere a cambiar por el de 5 galones, pero dejame decirte que el de 1 galón y 2 galones no hace casi nada de ruido, pero son para trabajos pequeños y/o de baja intensidad.
Si recomiendo estas herramientas. Debes verificar primero cual es la fuerza y poder que requieres para comprar el que nesecitas!
Saludos a todos los que leyeron!
Looks pretty much identical to the DeWalt Job Max. For about half the price. Decent.
I used to have the Porter cable Job Boss. But got burned in a fire. I loved it. But they're hard to find any more. I'm sure u'll like the 5 gal.
But you'll have to buy a splitter if you're gonna run 4 hoses off it.
If you are thinking about buying this compressor, I VERY HIGHLY recommend that you DO NOT have it shipped and pick it up in the store!!!
Mine arrived with:
* a 9" hole punched in the side
* the end seam staples torn out and the end flapping in the wind
* NO owners manual
* NO packing material to support it in transit
* scratches on the metal, from what looks like sliding along a concrete floor
When I called harbor freight, within hours of receiving the compressor, and after an hour on the phone, they said the I could ship it back, and AFTER THEY RECEIVED AND INSPECTED IT they would decide IF they would replace it!!!
I showed the damaged box with the compressor sliding freely around inside the compromised box, and asked him if he would accept and pick up this box, that I had taped up for shipping. He said NO!
Square cubic feet per minute? Nope, that would be feet^6 per minute. SCFM is Standard Cubic Feet per Minute which is CFM based on standard temperature and pressure.
How long does it take to fill ?
What’s the max PSI you can get on the regulator? I know it gets the tank up to 225 but how much can you actually get out of it on the regulator side?
Do you see any reason that this can't be run vertically? Manual says not but it also shows a different compressor that I believe couldn't run vertically. I'm not sure on this one unless it's the location of the outputs that would prevent it for some reason?
Hi Erik. I had a question about your Strike kit, but comments are turned off. I'm going through the same issue, not wanting to transport the rack, and I was wondering if you would be willing to do a video showing exactly how you ended up mounting your toms. Cheers!
Did u break it in?? Or just turn it on in the manual it says open main drain valve and let run for 15 min with tool line valve closed jw maybe why it took so long to fill blow the ring out smh js
Can this be used standing upright ?
Watch the video - it is written there.
Per the user manual: “Do note operate compressor in upright position.”
First time I ever heard of Square Cubic Feet. Usually it's standard-
I was in search of a video on this compressor five days ago and found nothing. Now I search today and viola! Irritating. Thanks. Also, the instructions say not to use an extension cord.
So how did it perform at ur job site
Can this run on the predator 2000 inverter?
Why didn't you do the required break in procedure??
What's a break in procedure?
will this compress spray paint? or is it too small?
it depends on how much paint you want to spray. I've got the same compressor. I shoot paint with an LVLP gun off a line that goes into an air dryer plumbed into the end of the manifold. Only one quick connect in that setup and the hose is relatively short. I get around five minutes of spray time before the compressor kicks in. For occasional jobs, it'll be fine.
Can you use it upward?
Asking this myself. Manual says not but it shows a different compressor also. It's oil free so hoping, but perhaps the angle the outputs are it may not. But I've asked now also
Thanks
Hi Eric, I have the identical compressor and have a little different problem than yours but with all your time spent on the phone maybe you know the answer. Mine will stop at the 225 psi but when I start using it the set pressure drops and it won’t maintain even 40psi. I was trying to spray paint and it wouldn’t hold any kind of pressure. I’ve used it in the past and it worked. Any ideas. Your other video had comments turned off.
Now it's $300
Yes $300
Standard* cubic feet
If you are thinking about buying this compressor, I VERY HIGHLY recommend that you DO NOT have it shipped and pick it up in the store!!!
Mine arrived with:
* a 9" hole punched in the side
* the end seam staples torn out and the end flapping in the wind
* NO owners manual
* NO packing material to support it in transit
* scratches on the metal, from what looks like sliding along a concrete floor
When I called harbor freight, within hours of receiving the compressor, and after an hour on the phone, they said the I could ship it back, and AFTER THEY RECEIVED AND INSPECTED IT they would decide IF they would replace it!!!
I showed the damaged box with the compressor sliding freely around inside the compromised box to a FedEx driver, and asked him if he would accept and pick up this box, that I had taped up for shipping. He said NO!
thank you. my Harbor Freight store is in Hollywood, just a subway ride and walk with dolly away