Good review, thanks. I just bought the 120v version (USA) for broken bolt and stud extraction. Yeah, display is off by a factor of 2. So just double what you need to get what you want. Still very small and light. Easy to carry on field work. :-)
@@tdivison Lol. Same here. I bought a 225 amp havadou from a pawn shop I spotted it in so i grab it for 45 bucks. I knew there was no way it could reach 225 amps on a 120 breaker but it's still a little beast that can run 1/8 6010 rods which surprised me and definitely 3/32 7018 all day.
110 Amper?? No.. Nö!! Only the half 55 Amper is the Real energy with 55 Volt DC and for 250 the Real Result is exactly 125 Amper Max DC!! Made in China
Goode Nice. Il faut toujours diminuer la tension ampère. De presque 30% de ce qui est indiquer sur l’afficheur digital. 90 c’est 60 ampères en réelle. Plusieurs machines chinois sont comme celle ci
Make sure your welding rods are dry, If in doubt leave them on a hot radiator to dry out, bag them with silica gel and keep dry in the house. Nothing worse than cold damp rods
the display reading is alwaysdoubled for chinese machine! you can adjust it internall, 105A is around 50A, 250A is around 125A . i suspect the importer should calibrate the display themselves for their country's power
hindi consistent yung amperahe...kung di ako nagka mlai,,2.5mm lang yung diameter ng electrode peru nahirapan pa rin itong lusawin...sa presyung Php 2,300.00+?...mag KAWASAKI ka nalang..subok na at matibay,,
It is thin steel. Easy to burn though. I'm not a fan of it either, but as long as it is strong enough for the application. This welder is hard to use at low amps.
Thanks just what I wanted !
Galing tlga! Lagi ako nag aabang nng vids mo idol!
Aside from above...impressive!
nice to see that you have your welding sandals on😝
Hello, can I use this to weld car exhaust?
Wow that’s pretty impressive!!
Nice work...thank you
Good review, thanks. I just bought the 120v version (USA) for broken bolt and stud extraction. Yeah, display is off by a factor of 2. So just double what you need to get what you want. Still very small and light. Easy to carry on field work. :-)
My same experience. If the unit claims to be 200 amps, it is most likely around 100 amps, which is still useful for a lot of around the home jobs.
@@tdivison Lol. Same here. I bought a 225 amp havadou from a pawn shop I spotted it in so i grab it for 45 bucks. I knew there was no way it could reach 225 amps on a 120 breaker but it's still a little beast that can run 1/8 6010 rods which surprised me and definitely 3/32 7018 all day.
This machine actually uses about half the current of what was written on it ... but it's not bad
yes, it's cheap and good for small repairs..
DONT FORGET.... MADE IN CHINA!!!
Where is available this machine
It is good for build homemade cars ? Please reply
Is this good for amateur to start
110 Amper?? No.. Nö!! Only the half 55 Amper is the Real energy with 55 Volt DC and for 250 the Real Result is exactly 125 Amper Max DC!! Made in China
Yes!!!
I really like your videos very time
Best of luck
thank you
you recommend it
Name of machine?
What is cost know
Mi inversora es de esa marca pero no pega la soldadura,,,,ke sera ?
Goode
Nice.
Il faut toujours diminuer la tension ampère. De presque 30% de ce qui est indiquer sur l’afficheur digital. 90 c’est 60 ampères en réelle.
Plusieurs machines chinois sont comme celle ci
Can I order this machine?
How much?
Amazing
So super
Mi inversor derrite el electrodo pero no solda
i want to know if this machine can weld stainless steel(thickness 1-3mm) for a short time(at most 5 minutes).
Yes
Can you weld together stronger things
it can weld on 5mm steel
I have no idea about welding, will a cheap welding kit like this be enough to weld steel to steel or do i need other parts/accessories to attach them?
Any welding kit can weld steel. The difference is material strength.
@@teslatrooper85 What do you advise for strong steel welding in stick welder?
possible welding bicycle frame strong inverter?
No.
I have the same welder. But mine doesnt weld easy as yours. It's all the time makink elecrtode stick to the steel. Even if I set max A
Make sure your welding rods are dry, If in doubt leave them on a hot radiator to dry out, bag them with silica gel and keep dry in the house. Nothing worse than cold damp rods
Dony touch the stick to the steel, hover very close to it and let the arc jump the gap, nearly kissing the steel but not quite
the display reading is alwaysdoubled for chinese machine! you can adjust it internall, 105A is around 50A, 250A is around 125A . i suspect the importer should calibrate the display themselves for their country's power
Hi. Sorry so late. How do I calibrate the amp setting on my havadou 225 machine. I'm lost.
How much Qatar riyal
Sana matuto ring magwelding.my binili rin ako portable hanggang ngaun di ko nagagamit.😁
gamitin n yn
Try not to weld so close the the actual welder as spark may get inside and damage the machine
0-125 Ampere Max 55VDC mit termoschutz Schalter am kühl Blech geschraubt und der geht schnell kaputt!!
What's the cost on the welder? No one ever lists the price on machines/tech they review here.
around 50usd
I'm Just curious what is the package weight ?
pounds
4.30 pounds
75A = 40a? i suspect these displays over-read - you have to half your reading, i.o.w its a 125A machine
I already mentioned on video the capacity are only half. but still good welder for beginners
magkqno?
Good idea of video
sankyü.
Lokl LP oo
Ok
Hm
Link sir oorder po ako, thanks
Going to buy me one!
hindi consistent yung amperahe...kung di ako nagka mlai,,2.5mm lang yung diameter ng electrode peru nahirapan pa rin itong lusawin...sa presyung Php 2,300.00+?...mag KAWASAKI ka nalang..subok na at matibay,,
I hate that tap tap welding , looks amature
It is thin steel. Easy to burn though. I'm not a fan of it either, but as long as it is strong enough for the application. This welder is hard to use at low amps.
🎉🎉
,👍👍👍
👏👏👏🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷